Re: ThumbDV wont work with BlueDV
W6JJ - Bruce
Ok - downloaded the test.exe and ran it - plugged in the com port - then baud rate - then it ran and closed immediately . . . . was not able to see anything - so I am guessing its bad for that to happen.
From: email@example.com <firstname.lastname@example.org> on behalf of John D Hays - K7VE <john@...>
Sent: Thursday, February 18, 2021 4:38 PM
To: email@example.com <firstname.lastname@example.org>
Subject: Re: [ambe] ThumbDV wont work with BlueDV
Does it appear as a COM port when you plug it in?
If it is very old, you may need to switch to 230400 baud. (Turn serial off, goto Menu -> Setup then under AMBE block).
There is a test exe in the files section of this forum to verify it works.
If you try to access it at the wrong baud rate, you may have to unplug and replug it and try again at the right baud rate depending on your computer's USB hardware.
On Thu, Feb 18, 2021 at 4:30 PM W6JJ - Bruce <W6JJ@...> wrote:
John D. Hays