Re: Multiple ThumbDV


 

It looks to me like it is recognizing two ThumbDV™s  each with its own serial number. 

How does it respond to ambedtest? https://github.com/LX3JL/xlxd/tree/master/ambedtest

If the ThumbDV™s individually pass tests, then you need to look at ambed with support from its author. 

On Wed, May 5, 2021, 05:58 <trustee@...> wrote:

[Edited Message Follows]

I have an AMBED server with two ThumbDV USB sticks but AMBED only see's one. When I do a status I get:

● ambed.service - AMBED
   Loaded: loaded (/etc/systemd/system/ambed.service; enabled; vendor preset: enabled)
   Active: active (running) since Tue 2021-05-04 18:31:55 EDT; 14h ago
  Process: 1461 ExecStartPre=/sbin/rmmod ftdi_sio (code=exited, status=0/SUCCESS)
  Process: 1466 ExecStartPre=/sbin/rmmod usbserial (code=exited, status=0/SUCCESS)
 Main PID: 1467 (ambed)
    Tasks: 13 (limit: 4915)
   Memory: 1004.0K
   CGroup: /system.slice/ambed.service
           └─1467 /ambed/ambed 10.1.10.10
 
May 04 18:31:55 xlx817Transcoder ambed[1467]: Description : ThumbDV         Serial : D35P64OJ
May 04 18:31:55 xlx817Transcoder ambed[1467]: Opening ThumbDV:D35TCT1I device
May 04 18:31:55 xlx817Transcoder ambed[1467]: ReadDeviceVersion : 0AMBE3000R
May 04 18:31:55 xlx817Transcoder ambed[1467]: 1V120.E100.XXXX.C106.G514.R009.B0010411.C0020208
May 04 18:31:55 xlx817Transcoder ambed[1467]: Opening ThumbDV:D35P64OJ device
May 04 18:31:55 xlx817Transcoder ambed[1467]: ReadDeviceVersion : 0AMBE3000R
May 04 18:31:55 xlx817Transcoder ambed[1467]: 1V120.E100.XXXX.C106.G514.R009.B0010411.C0020208
May 04 18:31:55 xlx817Transcoder ambed[1467]: Codec interfaces initialized successfully : 2 channels available
May 04 18:31:55 xlx817Transcoder ambed[1467]: Initializing controller
May 04 18:31:55 xlx817Transcoder ambed[1467]: AMBEd started and listening on 10.1.10.10
 

When I run ftx_prog
 
ftx_prog: version 0.3
Modified for the FT-X series by Richard Meadows
 
Based upon:
ft232r_prog: version 1.23, by Mark Lord.
        Battery Charge Detect (BCD) Enabled = False
        Force Power Enable Signal on CBUS = False
        Deactivate Sleep in Battery Charge Mode = False
        External Oscillator Enabled = False
        External Oscillator Feedback Resistor Enabled = False
        CBUS pin allocated to VBUS Sense Mode = False
        Load Virtual COM Port (VCP) Drivers = True
        Vendor ID (VID) = 0x0403
        Product ID (PID) = 0x6015
        USB Version = USB16.0
        Remote Wakeup by something other than USB = False
        Self Powered = False
        Maximum Current Supported from USB = 200mA
        Pins Pulled Down on USB Suspend = False
        Indicate USB Serial Number Available = True
 FT1248
-------
        FT1248 Clock Polarity = Active Low
        FT1248 Bit Order = MSB to LSB
        FT1248 Flow Control Enabled = False
 RS232
-------
        Invert TXD = False
        Invert RXD = False
        Invert RTS = False
        Invert CTS = False
        Invert DTR = False
        Invert DSR = False
        Invert DCD = False
        Invert RI = False
 RS485
-------
        RS485 Echo Suppression Enabled = False
        DBUS Drive Strength = 4mA
        DBUS Slow Slew Mode = 0
        DBUS Schmitt Trigger = 0
        CBUS Drive Strength = 4mA
        CBUS Slow Slew Mode = 0
        CBUS Schmitt Trigger = 0
        Manufacturer = NW Digital Radio 04/21
        Product = ThumbDV
        Serial Number = D35TCT1I
  I2C
-------
        I2C Slave Address = 0
        I2C Device ID = 0
        I2C Schmitt Triggers Disabled = False
  CBUS
-------
        CBUS0 = TXDEN
        CBUS1 = RxLED
        CBUS2 = TxLED
        CBUS3 = SLEEP
        CBUS4 = Tristate
        CBUS5 = Tristate
        CBUS6 = Tristate
No change from existing eeprom contents.
 

Join ambe@nw-digital-radio.groups.io to automatically receive all group messages.