Re: ambeserver-install -Has anyone run the Simple Install lately?


VE3MIC
 

Almost there...(it was a bad SD card) however, I'm running into an error when I run 'sudo systemctl status ambeserver@ttyAMA0'

ambeserver@... - AMBEserver Daemon
   Loaded: loaded (/etc/systemd/system/ambeserver@.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Wed 2021-05-05 22:00:11 EDT; 41s ago
  Process: 507 ExecStartPre=/bin/chgrp dialout /dev/ttyAMA0 (code=exited, status=0/SUCCESS)
  Process: 508 ExecStartPre=/bin/chmod 0660 /dev/ttyAMA0 (code=exited, status=0/SUCCESS)
  Process: 509 ExecStart=/usr/local/sbin/AMBEserver -p ${UDP_PORT} -i /dev/ttyAMA0 $AMBESERVER_FLAGS (code=exited, status=1/FAILURE)
 Main PID: 509 (code=exited, status=1/FAILURE)
 
May 05 22:00:11 AMBEServer systemd[1]: Starting AMBEserver Daemon...
May 05 22:00:11 AMBEServer systemd[1]: Started AMBEserver Daemon.
May 05 22:00:11 AMBEServer AMBEserver[509]: AMBEserver: Starting...
May 05 22:00:11 AMBEServer AMBEserver[509]: AMBEserver: Opened serial port /dev/ttyAMA0 at 230400 bps.
May 05 22:00:11 AMBEServer AMBEserver[509]: AMBEserver: Unable to open GPIO export interface: Permission denied
May 05 22:00:11 AMBEServer AMBEserver[509]: AMBEserver: Could not initialize the DV3K!
May 05 22:00:11 AMBEServer systemd[1]: ambeserver@...: Main process exited, code=exited, status=1/FAILURE
May 05 22:00:11 AMBEServer systemd[1]: ambeserver@...: Failed with result 'exit-code'.
May 05 22:00:11 AMBEServer systemd[1]: ambeserver@...: Triggering OnFailure= dependencies.

Join ambe@nw-digital-radio.groups.io to automatically receive all group messages.