1. ambe@nw-digital-radio.groups.io

Re: ThumbDV and Buster on OS X

Dan Porter (AI2M)
 

It looks like the changeover date to the higher speed was 13 July 2015 from this page:
http://nwdigitalradio.com/thumbdv-and-dv3000-resource-page/

and you probably have this one: https://nw-digital-radio.groups.io/g/ambe/wiki/AMBE-Devices

— Dan

On 4 Jul 2018, at 17:24, Dan Porter wrote:

I don’t have the USB version but with an older device I believe you need to select the 230400 Baud Rate. With my AMBE server setup after I input the correct info I have to select one of the other tabs and then the Vocoder tab again before I see the connection information appear.

73, Dan (AI2M)

On 4 Jul 2018, at 16:41, Luke.evans@... wrote:

I know this isn't the official place to get Buster support per se, but maybe folks here have some clue...

I bought a ThumbDV ages ago (probably a very early rev) and recently got it out to try with Buster on macOS.  
While I can see the serial device appear in /dev when I plug it into my USB port, Buster abjectly refuses to connect to it, saying that it cannot open the serial port.  

I'm using macOS High Sierra.
My Mac is a recent MacBook Pro (consequently I'm using a dongle to present a USB 3 port from the onboard USB-C - but the hardware does seem to be recognized correctly)
I have not installed additional drivers - hence using the default serial driver
I'm logged in as a regular user (though I've also tried launching Buster with sudo - but no difference in behaviour). 

Any clues greatly appreciated!  

Join ambe@nw-digital-radio.groups.io to automatically receive all group messages.