toggle quoted messageShow quoted text
as you remember before you compile (with make and make install)
you had edit the ambeserver.c file with a editor (as root) to
change in it the baudrate ( maybe you have), on one of the
following line you can also change the port. Change them also and
the baudrate and compile again ( with make and make install)
Am 30.01.19 um 14:05 schrieb Dev
Thank you Frank for your very prompt response..
It seems as though you might be using Compass Linux.
Unfortunately, I'm using Raspian Stretch., so there is no opendv
folder and neither am I seeing any ambeserver-ttyUSB0.conf
file to edit.
Thanks again buddy...73 Dev, 9Y4DG
On Wed, 30 Jan 2019 at
01:25, (null) (null) via Groups.Io <email@example.com
I’m running multiple servers also and I did the
following on the PI server:
Changed the UDP port to 18307
Did UDP port forwarding on the router for
On Jan 29, 2019, at 8:53 PM, Dev Gosine <dgosine@...
The AMBEServer defaults to port
2460. I would like to run multiple servers
simultaneously. Of course, they can't all use port
So the question is how does one change the UDP
port either in the initialisation process of the
Raspberry Pi and/or in the AMBE Server??
I suspect a file of two needs to be edited.....
any ideas or suggestions??
I thank you for your contributions...73 Dev,
“Your chances of success in any undertaking can
always be measured by your belief in yourself"
The pessimist complains about the wind.
The optimist expects it to change.
The leader adjusts the sails.
Teamwork is the ability to work together toward a common
The ability to direct individual accomplishment toward
It is the fuel that allows common people to attain uncommon
We believe that:
"We make a living by what we get,
We make a life by what we give!"