toggle quoted messageShow quoted text
Have you tried to unplug thumb DV and plug it in again?
On Tue, Aug 13, 2019 at 12:06 AM Andrew OBrien <k3ukandy@...> wrote:
I have not used my ThumbDV in a while. Today I plugged in in and installed the latest version of BlueDV. I set the baud rate in the set-up area tp 46080 and entered my comm port number in the two usual areas where we specify the desired comm port. The comm port I chose matches the number shown in my device manger. I have the top box ticked under AMBE for ThumbDV. Despite all this when I then click on SERIAL nothing happens , the firmware is not detected. I have tried it on a Windows 10PC and a Windows 7 PC.