Date   

Re: order

Jim Phelps
 

I think they are temp sold out.   They are making more---end of the month should be good to go.


-----Original Message-----
From: Michael Dyer <michael@...>
To: ambe@nw-digital-radio.groups.io
Sent: Mon, May 11, 2020 9:11 pm
Subject: Re: [ambe] order

please STOP SCREAMING
 
[Moderator: Some people with vision issues use all caps.  Yes, it is considered yelling in net etiquette, but let's give the benefit of the doubt. Thx.]
 
On Mon, May 11, 2020, 8:42 PM Tim Porter <tim@...> wrote:
I ORDERED A THUMBDV AND YET I HAVENT GOT A TRACKING NUMBER CAN SOMEONE PLEASE GET ME A TRACKING
 
my email is
73
tim k4kwq
 
 
 


Re: order

Michael Dyer
 

please STOP SCREAMING

 

[Moderator: Some people with vision issues use all caps.  Yes, it is considered yelling in net etiquette, but let's give the benefit of the doubt. Thx.]

 

On Mon, May 11, 2020, 8:42 PM Tim Porter <tim@...> wrote:
I ORDERED A THUMBDV AND YET I HAVENT GOT A TRACKING NUMBER CAN SOMEONE PLEASE GET ME A TRACKING
 
my email is
73
tim k4kwq
 

 

 


Re: order

 

Use the support link/form on https://nwdigitalradio.com/support to communicate with order processing. 


On Mon, May 11, 2020, 17:42 Tim Porter <tim@...> wrote:
I ORDERED A THUMBDV AND YET I HAVENT GOT A TRACKING NUMBER CAN SOMEONE PLEASE GET ME A TRACKING

my email is
73
tim k4kwq


order

Tim Porter
 

I ORDERED A THUMBDV AND YET I HAVENT GOT A TRACKING NUMBER CAN SOMEONE PLEASE GET ME A TRACKING

my email is
73
tim k4kwq


Stay at Home SALE on the ThumbDV™ Extended

 

When we started the sale back in March, it was until the Stay at Home Order was lifted or we ran out of inventory.

Due to high sales, we are now out of stock. A new build was initiated last week, so we’re going to extend the sale!

Normally $119.95, on Sale NOW for $99.95 until the order is lifted.

We expect the next build to arrive by the end of May.



--


John D. Hays
Director

  


Re: BlueDV Windows for ThumbDV

Gwen Patton
 

I don't use PI-STAR, David. I am connecting over my home LAN to a Raspberry Pi, but it is only running AMBEServer and a dynamic DNS updater daemon for my ThumbDV. The IP address is the URL for the dynamic DNS pointer to the ThumbDV. I'll look for a UPNP setting in what I've got, but I don't remember seeing that. (Yeah, I don't see a UPNP option anywhere.)

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sun, May 10, 2020 at 3:18 PM David PA7LIM <info@...> wrote:

Hi Gwen,

 

Never seen this. When you also use PI-STAR, disable UPNP. Maybe this will solve the strange behavior.

 

I know about FCS00199. This is an issue on the reflector. The parrot on YSF is working 100%.

 

 

Greets and 73,

    David PA7LIM

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of Gwen Patton via groups.io
Sent: Sunday, 10 May 2020 18:11
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] BlueDV Windows for ThumbDV

 

I've been using it since yesterday when I saw it posted, and it works really well. I even checked into the WIRES-X Net and the only comment I got was that my audio was a bit hot, so I backed it down. But there were a couple of relatively minor things I spotted.

 

Test notes for BlueDV 1.0.0.9581

- When keyed down and transmitting, the Fusion status box lights red intermittently, though
transmission is constant. This is at odds with receive activity, where the status box is lit
continuously on receiving another station. When sending, though the On Air legend at the lower
right is constant, the red light on the FUSION call status box is not constant. It turns on
and goes off seemingly at random. Linked to YSF AmericaLink at the time.

 

- Sometimes, during a long transmission, while experiencing the intermittent red status box, if I pause 

for a moment, the box will light up red and I'll hear the tail end of my own transmission. Just a split second

of it, not the entire thing. It's hard to reproduce. This might point at the intermittent red box issue being 

somehow connected to whether or not the user is speaking or pausing. VOX is OFF. I never use VOX.

It's pure conjecture, but maybe something is accidentally calling the VOX routine under some circumstances?

- Connected to FCS00199 (Echo), the Call line in the FUSION status box shows random characters
instead of a call sign or ID. This looks very odd. This did not happen on YSF AmericaLink,
where it showed my call sign. Haven't tried to reproduce this.

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 



Re: [spam] Re: [ambe] BlueDV Windows for ThumbDV

David Dennis
 

Okay,

 

I found this behavior only happens on a PC where BlueDV has never been installed.  (  I assume there is no default set in BlueDVconfig.ini is why )
Thanks,

David

 

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of David Dennis
Sent: Sunday, May 10, 2020 9:20 AM
To: ambe@nw-digital-radio.groups.io
Subject: Re: [spam] Re: [ambe] BlueDV Windows for ThumbDV

 

I don’t know if this is where we should post issues found.     If you are like me,  you’d almost rather not hear about them. 😊
But what I’ve found is,  you can’t select the Audio Input or Output device until you have already connected.   Once I enabled serial and then disabled it,  I was able to select an audio device.

 

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of David PA7LIM
Sent: Saturday, May 9, 2020 1:19 PM
To: ambe@nw-digital-radio.groups.io
Subject: [spam] Re: [ambe] BlueDV Windows for ThumbDV

 

This version 9581 is now available for testing : https://software.pa7lim.nl/BlueDV/BETA/Windows/


Re: BlueDV Windows for ThumbDV

 

Hi Gwen,

 

Never seen this. When you also use PI-STAR, disable UPNP. Maybe this will solve the strange behavior.

 

I know about FCS00199. This is an issue on the reflector. The parrot on YSF is working 100%.

 

 

Greets and 73,

    David PA7LIM

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of Gwen Patton via groups.io
Sent: Sunday, 10 May 2020 18:11
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] BlueDV Windows for ThumbDV

 

I've been using it since yesterday when I saw it posted, and it works really well. I even checked into the WIRES-X Net and the only comment I got was that my audio was a bit hot, so I backed it down. But there were a couple of relatively minor things I spotted.

 

Test notes for BlueDV 1.0.0.9581

- When keyed down and transmitting, the Fusion status box lights red intermittently, though
transmission is constant. This is at odds with receive activity, where the status box is lit
continuously on receiving another station. When sending, though the On Air legend at the lower
right is constant, the red light on the FUSION call status box is not constant. It turns on
and goes off seemingly at random. Linked to YSF AmericaLink at the time.

 

- Sometimes, during a long transmission, while experiencing the intermittent red status box, if I pause 

for a moment, the box will light up red and I'll hear the tail end of my own transmission. Just a split second

of it, not the entire thing. It's hard to reproduce. This might point at the intermittent red box issue being 

somehow connected to whether or not the user is speaking or pausing. VOX is OFF. I never use VOX.

It's pure conjecture, but maybe something is accidentally calling the VOX routine under some circumstances?

- Connected to FCS00199 (Echo), the Call line in the FUSION status box shows random characters
instead of a call sign or ID. This looks very odd. This did not happen on YSF AmericaLink,
where it showed my call sign. Haven't tried to reproduce this.

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sun, May 10, 2020 at 12:04 PM <hans@...> wrote:

Hi David,

excellent Work!!!

I noticed a little glitch in the setup:

My ThumbDV is on COM1, but every time i open the setup menu, it will reset to the first entry in the list (COM18 in my case) and i have to set it back to COM1 before saving.



73 de Hans, AB5HM


Re: BlueDV Windows for ThumbDV

 

Hello Hans,

 

Thanks!

 

Normally the list should be sorted. Then it will find COM1 first.

I changed it now to an exactfind. Hopefully it is solved in the upcoming version. Let me know.

 

Greets and 73,

    David PA7LIM

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of hans via groups.io
Sent: Sunday, 10 May 2020 18:04
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] BlueDV Windows for ThumbDV

 

Hi David,

excellent Work!!!

I noticed a little glitch in the setup:

My ThumbDV is on COM1, but every time i open the setup menu, it will reset to the first entry in the list (COM18 in my case) and i have to set it back to COM1 before saving.



73 de Hans, AB5HM


Re: BlueDV Windows for ThumbDV

Gwen Patton
 

I've been using it since yesterday when I saw it posted, and it works really well. I even checked into the WIRES-X Net and the only comment I got was that my audio was a bit hot, so I backed it down. But there were a couple of relatively minor things I spotted.

Test notes for BlueDV 1.0.0.9581

- When keyed down and transmitting, the Fusion status box lights red intermittently, though
transmission is constant. This is at odds with receive activity, where the status box is lit
continuously on receiving another station. When sending, though the On Air legend at the lower
right is constant, the red light on the FUSION call status box is not constant. It turns on
and goes off seemingly at random. Linked to YSF AmericaLink at the time.

- Sometimes, during a long transmission, while experiencing the intermittent red status box, if I pause 
for a moment, the box will light up red and I'll hear the tail end of my own transmission. Just a split second
of it, not the entire thing. It's hard to reproduce. This might point at the intermittent red box issue being 
somehow connected to whether or not the user is speaking or pausing. VOX is OFF. I never use VOX.
It's pure conjecture, but maybe something is accidentally calling the VOX routine under some circumstances?

- Connected to FCS00199 (Echo), the Call line in the FUSION status box shows random characters
instead of a call sign or ID. This looks very odd. This did not happen on YSF AmericaLink,
where it showed my call sign. Haven't tried to reproduce this.

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sun, May 10, 2020 at 12:04 PM <hans@...> wrote:
Hi David,

excellent Work!!!

I noticed a little glitch in the setup:

My ThumbDV is on COM1, but every time i open the setup menu, it will reset to the first entry in the list (COM18 in my case) and i have to set it back to COM1 before saving.



73 de Hans, AB5HM


Re: BlueDV Windows for ThumbDV

hans@...
 

Hi David,

excellent Work!!!

I noticed a little glitch in the setup:

My ThumbDV is on COM1, but every time i open the setup menu, it will reset to the first entry in the list (COM18 in my case) and i have to set it back to COM1 before saving.



73 de Hans, AB5HM


Re: BlueDV Windows for ThumbDV

 

Hello

 

That is correct if you select XLX in Fusion.

When you select YSF and then XLX051, it will connect. I just tested.

 

 

The reason:

XLX database does not contain the connecting port and always uses port 42000. I think that XLX051 uses port 42001 or 42002.

 

Greets and 73,

    David PA7LIM

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of EA5GVK Joaquin via groups.io
Sent: Sunday, 10 May 2020 14:10
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] BlueDV Windows for ThumbDV

 

David, good afternoon, because through fusion I can't connect to the XLX051 with the new Fusion?
Through Pi-star and DVlink you can enter the xlx051.
Thank you.

 

El sáb., 9 may. 2020 a las 20:19, David PA7LIM (<info@...>) escribió:

This version 9581 is now available for testing : https://software.pa7lim.nl/BlueDV/BETA/Windows/


Re: BlueDV Windows for ThumbDV

EA5GVK Joaquin
 

David, good afternoon, because through fusion I can't connect to the XLX051 with the new Fusion?
Through Pi-star and DVlink you can enter the xlx051.
Thank you.


El sáb., 9 may. 2020 a las 20:19, David PA7LIM (<info@...>) escribió:
This version 9581 is now available for testing : https://software.pa7lim.nl/BlueDV/BETA/Windows/


Re: [spam] Re: [ambe] BlueDV Windows for ThumbDV

David Dennis
 

I don’t know if this is where we should post issues found.     If you are like me,  you’d almost rather not hear about them. 😊
But what I’ve found is,  you can’t select the Audio Input or Output device until you have already connected.   Once I enabled serial and then disabled it,  I was able to select an audio device.

 

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of David PA7LIM
Sent: Saturday, May 9, 2020 1:19 PM
To: ambe@nw-digital-radio.groups.io
Subject: [spam] Re: [ambe] BlueDV Windows for ThumbDV

 

This version 9581 is now available for testing : https://software.pa7lim.nl/BlueDV/BETA/Windows/


Re: BlueDV Windows for ThumbDV

John N8JJO
 

Excellent David! Looking forward to testing today.

73 John N8JJO


Re: I want a refund !

sancudo
 


On Sat, May 9, 2020, 3:22 PM alpha foxtrotsix <alphafoxtrotsix@...> wrote:
Great for sticking with it. I just downloaded the latest version of BlueDV for Windows,  9581 with Fusion TX capability

On Thu, May 7, 2020, 17:45 S. Wilk <nk9a@...> wrote:
 I got  it all working , but it took a teamviewer session to do it .   My  friend who helped me was in a hurry so He  did not say where I screwed up on this .  many thanks for all the advice . 


Re: I want a refund !

Gwen Patton
 

I've got the test version going too, and so far I only found two cosmetic issues. The Fusion status box has intermittent red during sending when it should be continuous, and when connected to an echo room the call line in the status box showed random garbage instead of my call. That's all I've spotted so far, but I'm making notes for David as I test.


On Sat, May 9, 2020, 4:45 PM sancudo <sancudobravo@...> wrote:
New version BlueDv 9581 works great with Fusion. Didn't notice any hiccups. Works smoothly with Windows 10.

Mario
WO5O

On Sat, May 9, 2020, 3:22 PM alpha foxtrotsix <alphafoxtrotsix@...> wrote:
Great for sticking with it. I just downloaded the latest version of BlueDV for Windows,  9581 with Fusion TX capability

On Thu, May 7, 2020, 17:45 S. Wilk <nk9a@...> wrote:
 I got  it all working , but it took a teamviewer session to do it .   My  friend who helped me was in a hurry so He  did not say where I screwed up on this .  many thanks for all the advice . 


Re: I want a refund !

sancudo
 

New version BlueDv 9581 works great with Fusion. Didn't notice any hiccups. Works smoothly with Windows 10.

Mario
WO5O


On Sat, May 9, 2020, 3:22 PM alpha foxtrotsix <alphafoxtrotsix@...> wrote:
Great for sticking with it. I just downloaded the latest version of BlueDV for Windows,  9581 with Fusion TX capability

On Thu, May 7, 2020, 17:45 S. Wilk <nk9a@...> wrote:
 I got  it all working , but it took a teamviewer session to do it .   My  friend who helped me was in a hurry so He  did not say where I screwed up on this .  many thanks for all the advice . 


Re: I want a refund !

alpha foxtrotsix
 

Great for sticking with it. I just downloaded the latest version of BlueDV for Windows,  9581 with Fusion TX capability


On Thu, May 7, 2020, 17:45 S. Wilk <nk9a@...> wrote:
 I got  it all working , but it took a teamviewer session to do it .   My  friend who helped me was in a hurry so He  did not say where I screwed up on this .  many thanks for all the advice . 


Re: BlueDV Windows for ThumbDV

alpha foxtrotsix
 

I will download and test.

De AF6BY


Jeff

On Sat, May 9, 2020, 11:19 David PA7LIM <info@...> wrote:
This version 9581 is now available for testing : https://software.pa7lim.nl/BlueDV/BETA/Windows/