Date   

Peanut on Windows Returns Error Message

Fred Jacobowitz
 

Peanut for Windows Version 2.2.7 
When I select the ON control I get the following error: ERROR:Incorrect Code! www.pa7lim/nl/peanut.
On the setup page I entered my callsign and the DRM id was returned by the Query button. However, the USTRUST comes back with "NOT CHECKED". on the D-STAR Gateway System (REGIST) I can login and see my personal information. I have two entries KE2QR (initial set to space) and the second KE2QR Z check for AccessPoint.
What am I missing?
Thank you.


Re: Linking Peanut Server to Fusion Room

Gwen Patton
 

You're right, I did miss that point.


On Sat, May 30, 2020, 5:43 PM Charles Wiant via groups.io <kd8itc=aol.com@groups.io> wrote:
I think everyone has missed the point he wants to link peanut to his fusion room. That way users can talk off there peanut app into his fusion room. I suggest message david directly. 


On May 30, 2020, at 3:24 PM, Gwen Patton <ardrhi@...> wrote:


Thank you, David.

I knew you'd updated the Windows version for Fusion, and have been happily using it -- it's FANTASTIC! I didn't know you'd also updated the Android version, which I note was updated on my phone automatically, and seems to be working just fine via my Pi Ambeserver. Thank you again!

Is Peanut working like Alain suggested? Just curious...I'm not using Peanut.

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 4:07 PM David PA7LIM <info@...> wrote:

The Garage project ( BlueDV AMBE for Android  ) is transmitting on Fusion.

See: https://www.pa7lim.nl/garage

 

 

Greets and 73,

    David PA7LIM

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of Gwen Patton via groups.io
Sent: Saturday, 30 May 2020 21:52
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Yeah, the Windows version works already with ThumbDV on Fusion just great. Just a plain-jane Ambeserver install on a Pi with a dynamic DNS daemon to keep the IP address steady will work great with the Windows version on Fusion anywhere you have Internet. But that's the Windows version. The Android version(s) have never, to my knowledge, EVER transmitted on Fusion. (Some will RECEIVE it with a secret handshake that I don't recall offhand.)

 

All I'm saying. I'm done. Y'all have a good day now.

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 3:44 PM kb8zgl <wolthuis@...> wrote:

Sorry, no the Windows version.

 

Mike

 

 

From: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io> on behalf of Gwen Patton <ardrhi@...>
Reply-To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Date: Saturday, May 30, 2020 at 3:26 PM
To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Mike, are you talking about the ANDROID version of BlueDV? It is called "BlueDV AMBE". That's it's name. 

 

The WINDOWS version was the only one working completely with Fusion last I looked. David even said the Android version may never transmit on Fusion, last I heard.

 

Peanut is a very restricted version that only ever worked with David's servers that I know of. I'll admit I haven't looked at Peanut recently, but I generally don't need it.

 

The ThumbDV stuck is an AMBE device, but the NAME of the Windows version that works on Fusion is "BlueDV Windows". "BlueDV AMBE" is the NAME of the Android version that never has had full Fusion support.

 

Hence my confusion here. I didn't know Peanut worked with any servers but David's, and want aware he made it work with Fusion when the FULL Android version still does not. Peanut is an Android product, so I hope you see why I asked what I did.

 

On Sat, May 30, 2020, 2:04 PM kb8zgl <wolthuis@...> wrote:

The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

 

Mike

Kb8zgl 

 

 

On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:



Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

 

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>

 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

 

Hello Gwen,

You are welcome! 

Alain sent me an email and I replied him today. I did not understood if he wanted to connect yaesu wires-x or an YSF reflector. It is not possible for me to connect yaesu wiresx. Yaesu wiresx is a closed network.
I can make a connection with peanut to YSF reflectors. All bugs are gone and is very stable.
There is a Spanish and English test reflector connected for testing.


David

On 30 May 2020, at 22:24, Gwen Patton via groups.io <ardrhi@...> wrote:


Thank you, David.

I knew you'd updated the Windows version for Fusion, and have been happily using it -- it's FANTASTIC! I didn't know you'd also updated the Android version, which I note was updated on my phone automatically, and seems to be working just fine via my Pi Ambeserver. Thank you again!

Is Peanut working like Alain suggested? Just curious...I'm not using Peanut.

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 4:07 PM David PA7LIM <info@...> wrote:

The Garage project ( BlueDV AMBE for Android  ) is transmitting on Fusion.

See: https://www.pa7lim.nl/garage

 

 

Greets and 73,

    David PA7LIM

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of Gwen Patton via groups.io
Sent: Saturday, 30 May 2020 21:52
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Yeah, the Windows version works already with ThumbDV on Fusion just great. Just a plain-jane Ambeserver install on a Pi with a dynamic DNS daemon to keep the IP address steady will work great with the Windows version on Fusion anywhere you have Internet. But that's the Windows version. The Android version(s) have never, to my knowledge, EVER transmitted on Fusion. (Some will RECEIVE it with a secret handshake that I don't recall offhand.)

 

All I'm saying. I'm done. Y'all have a good day now.

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 3:44 PM kb8zgl <wolthuis@...> wrote:

Sorry, no the Windows version.

 

Mike

 

 

From: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io> on behalf of Gwen Patton <ardrhi@...>
Reply-To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Date: Saturday, May 30, 2020 at 3:26 PM
To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Mike, are you talking about the ANDROID version of BlueDV? It is called "BlueDV AMBE". That's it's name. 

 

The WINDOWS version was the only one working completely with Fusion last I looked. David even said the Android version may never transmit on Fusion, last I heard.

 

Peanut is a very restricted version that only ever worked with David's servers that I know of. I'll admit I haven't looked at Peanut recently, but I generally don't need it.

 

The ThumbDV stuck is an AMBE device, but the NAME of the Windows version that works on Fusion is "BlueDV Windows". "BlueDV AMBE" is the NAME of the Android version that never has had full Fusion support.

 

Hence my confusion here. I didn't know Peanut worked with any servers but David's, and want aware he made it work with Fusion when the FULL Android version still does not. Peanut is an Android product, so I hope you see why I asked what I did.

 

On Sat, May 30, 2020, 2:04 PM kb8zgl <wolthuis@...> wrote:

The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

 

Mike

Kb8zgl 

 

 

On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:



Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

 

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>

 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

Charles Wiant
 

I think everyone has missed the point he wants to link peanut to his fusion room. That way users can talk off there peanut app into his fusion room. I suggest message david directly. 


On May 30, 2020, at 3:24 PM, Gwen Patton <ardrhi@...> wrote:


Thank you, David.

I knew you'd updated the Windows version for Fusion, and have been happily using it -- it's FANTASTIC! I didn't know you'd also updated the Android version, which I note was updated on my phone automatically, and seems to be working just fine via my Pi Ambeserver. Thank you again!

Is Peanut working like Alain suggested? Just curious...I'm not using Peanut.

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 4:07 PM David PA7LIM <info@...> wrote:

The Garage project ( BlueDV AMBE for Android  ) is transmitting on Fusion.

See: https://www.pa7lim.nl/garage

 

 

Greets and 73,

    David PA7LIM

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of Gwen Patton via groups.io
Sent: Saturday, 30 May 2020 21:52
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Yeah, the Windows version works already with ThumbDV on Fusion just great. Just a plain-jane Ambeserver install on a Pi with a dynamic DNS daemon to keep the IP address steady will work great with the Windows version on Fusion anywhere you have Internet. But that's the Windows version. The Android version(s) have never, to my knowledge, EVER transmitted on Fusion. (Some will RECEIVE it with a secret handshake that I don't recall offhand.)

 

All I'm saying. I'm done. Y'all have a good day now.

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 3:44 PM kb8zgl <wolthuis@...> wrote:

Sorry, no the Windows version.

 

Mike

 

 

From: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io> on behalf of Gwen Patton <ardrhi@...>
Reply-To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Date: Saturday, May 30, 2020 at 3:26 PM
To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Mike, are you talking about the ANDROID version of BlueDV? It is called "BlueDV AMBE". That's it's name. 

 

The WINDOWS version was the only one working completely with Fusion last I looked. David even said the Android version may never transmit on Fusion, last I heard.

 

Peanut is a very restricted version that only ever worked with David's servers that I know of. I'll admit I haven't looked at Peanut recently, but I generally don't need it.

 

The ThumbDV stuck is an AMBE device, but the NAME of the Windows version that works on Fusion is "BlueDV Windows". "BlueDV AMBE" is the NAME of the Android version that never has had full Fusion support.

 

Hence my confusion here. I didn't know Peanut worked with any servers but David's, and want aware he made it work with Fusion when the FULL Android version still does not. Peanut is an Android product, so I hope you see why I asked what I did.

 

On Sat, May 30, 2020, 2:04 PM kb8zgl <wolthuis@...> wrote:

The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

 

Mike

Kb8zgl 

 

 

On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:



Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

 

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>

 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

Gwen Patton
 

Thank you, David.

I knew you'd updated the Windows version for Fusion, and have been happily using it -- it's FANTASTIC! I didn't know you'd also updated the Android version, which I note was updated on my phone automatically, and seems to be working just fine via my Pi Ambeserver. Thank you again!

Is Peanut working like Alain suggested? Just curious...I'm not using Peanut.

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 4:07 PM David PA7LIM <info@...> wrote:

The Garage project ( BlueDV AMBE for Android  ) is transmitting on Fusion.

See: https://www.pa7lim.nl/garage

 

 

Greets and 73,

    David PA7LIM

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of Gwen Patton via groups.io
Sent: Saturday, 30 May 2020 21:52
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Yeah, the Windows version works already with ThumbDV on Fusion just great. Just a plain-jane Ambeserver install on a Pi with a dynamic DNS daemon to keep the IP address steady will work great with the Windows version on Fusion anywhere you have Internet. But that's the Windows version. The Android version(s) have never, to my knowledge, EVER transmitted on Fusion. (Some will RECEIVE it with a secret handshake that I don't recall offhand.)

 

All I'm saying. I'm done. Y'all have a good day now.

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 3:44 PM kb8zgl <wolthuis@...> wrote:

Sorry, no the Windows version.

 

Mike

 

 

From: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io> on behalf of Gwen Patton <ardrhi@...>
Reply-To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Date: Saturday, May 30, 2020 at 3:26 PM
To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Mike, are you talking about the ANDROID version of BlueDV? It is called "BlueDV AMBE". That's it's name. 

 

The WINDOWS version was the only one working completely with Fusion last I looked. David even said the Android version may never transmit on Fusion, last I heard.

 

Peanut is a very restricted version that only ever worked with David's servers that I know of. I'll admit I haven't looked at Peanut recently, but I generally don't need it.

 

The ThumbDV stuck is an AMBE device, but the NAME of the Windows version that works on Fusion is "BlueDV Windows". "BlueDV AMBE" is the NAME of the Android version that never has had full Fusion support.

 

Hence my confusion here. I didn't know Peanut worked with any servers but David's, and want aware he made it work with Fusion when the FULL Android version still does not. Peanut is an Android product, so I hope you see why I asked what I did.

 

On Sat, May 30, 2020, 2:04 PM kb8zgl <wolthuis@...> wrote:

The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

 

Mike

Kb8zgl 

 

 

On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:



Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

 

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>

 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

 

The Garage project ( BlueDV AMBE for Android  ) is transmitting on Fusion.

See: https://www.pa7lim.nl/garage

 

 

Greets and 73,

    David PA7LIM

 

From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of Gwen Patton via groups.io
Sent: Saturday, 30 May 2020 21:52
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Yeah, the Windows version works already with ThumbDV on Fusion just great. Just a plain-jane Ambeserver install on a Pi with a dynamic DNS daemon to keep the IP address steady will work great with the Windows version on Fusion anywhere you have Internet. But that's the Windows version. The Android version(s) have never, to my knowledge, EVER transmitted on Fusion. (Some will RECEIVE it with a secret handshake that I don't recall offhand.)

 

All I'm saying. I'm done. Y'all have a good day now.

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 3:44 PM kb8zgl <wolthuis@...> wrote:

Sorry, no the Windows version.

 

Mike

 

 

From: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io> on behalf of Gwen Patton <ardrhi@...>
Reply-To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Date: Saturday, May 30, 2020 at 3:26 PM
To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Mike, are you talking about the ANDROID version of BlueDV? It is called "BlueDV AMBE". That's it's name. 

 

The WINDOWS version was the only one working completely with Fusion last I looked. David even said the Android version may never transmit on Fusion, last I heard.

 

Peanut is a very restricted version that only ever worked with David's servers that I know of. I'll admit I haven't looked at Peanut recently, but I generally don't need it.

 

The ThumbDV stuck is an AMBE device, but the NAME of the Windows version that works on Fusion is "BlueDV Windows". "BlueDV AMBE" is the NAME of the Android version that never has had full Fusion support.

 

Hence my confusion here. I didn't know Peanut worked with any servers but David's, and want aware he made it work with Fusion when the FULL Android version still does not. Peanut is an Android product, so I hope you see why I asked what I did.

 

On Sat, May 30, 2020, 2:04 PM kb8zgl <wolthuis@...> wrote:

The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

 

Mike

Kb8zgl 

 

 

On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:



Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

 

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>

 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

Gwen Patton
 

Yeah, the Windows version works already with ThumbDV on Fusion just great. Just a plain-jane Ambeserver install on a Pi with a dynamic DNS daemon to keep the IP address steady will work great with the Windows version on Fusion anywhere you have Internet. But that's the Windows version. The Android version(s) have never, to my knowledge, EVER transmitted on Fusion. (Some will RECEIVE it with a secret handshake that I don't recall offhand.)

All I'm saying. I'm done. Y'all have a good day now.

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 3:44 PM kb8zgl <wolthuis@...> wrote:

Sorry, no the Windows version.

 

Mike

 

 

From: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io> on behalf of Gwen Patton <ardrhi@...>
Reply-To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Date: Saturday, May 30, 2020 at 3:26 PM
To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Mike, are you talking about the ANDROID version of BlueDV? It is called "BlueDV AMBE". That's it's name. 

 

The WINDOWS version was the only one working completely with Fusion last I looked. David even said the Android version may never transmit on Fusion, last I heard.

 

Peanut is a very restricted version that only ever worked with David's servers that I know of. I'll admit I haven't looked at Peanut recently, but I generally don't need it.

 

The ThumbDV stuck is an AMBE device, but the NAME of the Windows version that works on Fusion is "BlueDV Windows". "BlueDV AMBE" is the NAME of the Android version that never has had full Fusion support.

 

Hence my confusion here. I didn't know Peanut worked with any servers but David's, and want aware he made it work with Fusion when the FULL Android version still does not. Peanut is an Android product, so I hope you see why I asked what I did.

 

On Sat, May 30, 2020, 2:04 PM kb8zgl <wolthuis@...> wrote:

The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

 

Mike

Kb8zgl 

 



On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:



Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

 

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>

 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

kb8zgl
 

Sorry, no the Windows version.

 

Mike

 

 

From: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io> on behalf of Gwen Patton <ardrhi@...>
Reply-To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Date: Saturday, May 30, 2020 at 3:26 PM
To: "ambe@nw-digital-radio.groups.io" <ambe@nw-digital-radio.groups.io>
Subject: Re: [ambe] Linking Peanut Server to Fusion Room

 

Mike, are you talking about the ANDROID version of BlueDV? It is called "BlueDV AMBE". That's it's name. 

 

The WINDOWS version was the only one working completely with Fusion last I looked. David even said the Android version may never transmit on Fusion, last I heard.

 

Peanut is a very restricted version that only ever worked with David's servers that I know of. I'll admit I haven't looked at Peanut recently, but I generally don't need it.

 

The ThumbDV stuck is an AMBE device, but the NAME of the Windows version that works on Fusion is "BlueDV Windows". "BlueDV AMBE" is the NAME of the Android version that never has had full Fusion support.

 

Hence my confusion here. I didn't know Peanut worked with any servers but David's, and want aware he made it work with Fusion when the FULL Android version still does not. Peanut is an Android product, so I hope you see why I asked what I did.

 

On Sat, May 30, 2020, 2:04 PM kb8zgl <wolthuis@...> wrote:

The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

 

Mike

Kb8zgl 

 



On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:



Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

 

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

 

-=-=-=-=-=-=-=-=-

73,

Gwen, NG3P

 

 

On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>

 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

Gwen Patton
 

You know what?

NEVER MIND. Forget I even said anything on this thread. I'm not David's support, I just use his programs. It's possible he's done something arcane with Peanut I don't know about because I don't use it. So maybe David will chime in and answer it, because I can't, and don't want to suck up bandwidth anymore with trying to figure out what people are talking about. I need a dandelion break.

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 3:26 PM Gwen Patton via groups.io <ardrhi=gmail.com@groups.io> wrote:
Mike, are you talking about the ANDROID version of BlueDV? It is called "BlueDV AMBE". That's it's name. 

The WINDOWS version was the only one working completely with Fusion last I looked. David even said the Android version may never transmit on Fusion, last I heard.

Peanut is a very restricted version that only ever worked with David's servers that I know of. I'll admit I haven't looked at Peanut recently, but I generally don't need it.

The ThumbDV stuck is an AMBE device, but the NAME of the Windows version that works on Fusion is "BlueDV Windows". "BlueDV AMBE" is the NAME of the Android version that never has had full Fusion support.

Hence my confusion here. I didn't know Peanut worked with any servers but David's, and want aware he made it work with Fusion when the FULL Android version still does not. Peanut is an Android product, so I hope you see why I asked what I did.

On Sat, May 30, 2020, 2:04 PM kb8zgl <wolthuis@...> wrote:
The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

Mike
Kb8zgl 


On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:


Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>
 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

Gwen Patton
 

Mike, are you talking about the ANDROID version of BlueDV? It is called "BlueDV AMBE". That's it's name. 

The WINDOWS version was the only one working completely with Fusion last I looked. David even said the Android version may never transmit on Fusion, last I heard.

Peanut is a very restricted version that only ever worked with David's servers that I know of. I'll admit I haven't looked at Peanut recently, but I generally don't need it.

The ThumbDV stuck is an AMBE device, but the NAME of the Windows version that works on Fusion is "BlueDV Windows". "BlueDV AMBE" is the NAME of the Android version that never has had full Fusion support.

Hence my confusion here. I didn't know Peanut worked with any servers but David's, and want aware he made it work with Fusion when the FULL Android version still does not. Peanut is an Android product, so I hope you see why I asked what I did.

On Sat, May 30, 2020, 2:04 PM kb8zgl <wolthuis@...> wrote:
The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

Mike
Kb8zgl 


On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:


Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>
 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

kb8zgl
 

The latest BlueDV beta is working on Fusion with NW Radio AMBE!  Mines over network and vpn even 

Mike
Kb8zgl 


On May 30, 2020, at 1:07 PM, Gwen Patton <ardrhi@...> wrote:


Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:

<Peanut_to_Fusion_question.PNG>
 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: Linking Peanut Server to Fusion Room

Gwen Patton
 

Is there a reason you're using Peanut, and not the actual BlueDV or BlueDV AMBE clients? I have a simple AMBEServer set up on a Pi 3+, and I can connect to any reflector. With BlueDV Windows, I can even connect to Fusion rooms. You just can't connect to Fusion to transmit with the Android client. But the Windows client works fine on DMR, D-STar, and Fusion. The Android BlueDV works fine for DMR and D-Star.

So why are you messing with Peanut? That's a really limited program. David hasn't made BlueDV AMBE do Fusion, has he made Peanut do Fusion somehow?  Is that why you're using Peanut?

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, May 30, 2020 at 11:16 AM Alain Reid <va2spb@...> wrote:

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:
 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Linking Peanut Server to Fusion Room

Alain Reid
 

Folks, I am trying to achieve what PA7LIM describes below: My goal that is to allow an amateur with Peanuts Client on his Android / Windows to have a QSO with an amateur who uses his Yeasu FT3D on my Fusion repeater. So I followed PA7LIM procedure described below:
 


I set up an AMBEserver on a Raspberry PI 4 using a ThumbDV. That works well. It did not work with DVStick30 unfortunately. In reference to the red dots above, my questions are the following:
Q1: Do I really have to build a YSF repeater or I can just provide PA7LIM with my Room number  so he can connects is Peanut server to my Fusion Room number?  Q2: Do I need to set up a YSF Server and than link it to my Fusion Room number and  forward that to PA7LIM with  the Hostname and port of the YSF server? Thank you folks if you can bright some light! 73!


Re: DVstick 30 and AMBEServer Linux (Pi) #anbeserver #ambeserver

alpha foxtrotsix
 

I had no problems setting it up on my pi zero on Compass. Are you getting any sort of error message?

De AF6BY

Jeff

On Mon, May 18, 2020, 19:01 <ke8oiv@...> wrote:
I'm running into trouble with getting the service started on a Pi3 with Compass and a DVstick 30.  It sounds like the DVstick is compatible but can someone please confirm.  Thanks!


Re: DVstick 30 and AMBEServer Linux (Pi) #anbeserver #ambeserver

Mike Moore
 

thanks
Mike Moore
mikemoore@...
Cell, Text (585) 721-0011
Google Voice (585) 310-1812




On Tue, May 19, 2020 at 12:02 PM Mike Webb [WG5EEK] <michael.af.webb@...> wrote:
Hamvoip runs Arch Linux so yes you would have to compile from source and make sure you have all the development dependencies installed.  I had a hard time doing anything with that version of Linux until I did that.


Re: DVstick 30 and AMBEServer Linux (Pi) #anbeserver #ambeserver

Stefsan
 

Hi,

its no need to install a driver, all is in Kernal.

IMPORTANT!!!!

I saw a lot of Problems where the Stick is not found on /dev/ttyUSB0

PLEASE check the goups file with sudo nano /etc/group

if the dailout group constst of your user

check the line

dialout:x:20:stefan

(in my case stefan is the user who runs ambe server, if he is not in this line by dailout the communication with the stick is not given by default.

( if nano as a text editor is not installed to view the /etc/group file install if before with sudo apt-get install nano

to start on comand line use for DV30 Stck

AMBEserver -d -s 460800 -p 2460 -i /dev/ttyUSB0

Stefan DL1ESZ































Am 19.05.20 um 21:30 schrieb Nomis Bayan Jr.:

Hi Stefan,

Did you try to install two DV30Stick? Did you also install the FTDI driver.

On 5/19/2020 12:36 AM, Stefsan wrote:

where Hi ,

DV30 runns perfect on AMBE Server.

Dont use Compass Linux use a standart Raspian Image, after installation use AMBE Server installation from github source

https://github.com/marrold/AMBEServer

its very easy to compile

Google youtube shows how easy it is, Have running it here since 1 year without no problems

Stefan DL1ESZ


Am 19.05.20 um 03:22 schrieb ke8oiv@...:
I'm running into trouble with getting the service started on a Pi3 with Compass and a DVstick 30.  It sounds like the DVstick is compatible but can someone please confirm.  Thanks!


Re: DVstick 30 and AMBEServer Linux (Pi) #anbeserver #ambeserver

ke8oiv@...
 

I switched the user to pi-star, all good!


Re: DVstick 30 and AMBEServer Linux (Pi) #anbeserver #ambeserver

 

Create a user opendv and add them to the dialout group

On Tue, May 19, 2020 at 2:06 PM <ke8oiv@...> wrote:
It ended up being the USER=opendv in the systemd file below.  opendv is not a user.

/etc/systemd/system/multi-user.target.wants/ambeserver@...



--
John D. Hays
Kingston, WA
K7VE

 


Re: DVstick 30 and AMBEServer Linux (Pi) #anbeserver #ambeserver

ke8oiv@...
 

It ended up being the USER=opendv in the systemd file below.  opendv is not a user.

/etc/systemd/system/multi-user.target.wants/ambeserver@...


Re: DVstick 30 and AMBEServer Linux (Pi) #anbeserver #ambeserver

Nomis Bayan Jr.
 

Hi Stefan,

Did you try to install two DV30Stick? Did you also install the FTDI driver.

On 5/19/2020 12:36 AM, Stefsan wrote:

Hi ,

DV30 runns perfect on AMBE Server.

Dont use Compass Linux use a standart Raspian Image, after installation use AMBE Server installation from github source

https://github.com/marrold/AMBEServer

its very easy to compile

Google youtube shows how easy it is, Have running it here since 1 year without no problems

Stefan DL1ESZ


Am 19.05.20 um 03:22 schrieb ke8oiv@...:
I'm running into trouble with getting the service started on a Pi3 with Compass and a DVstick 30.  It sounds like the DVstick is compatible but can someone please confirm.  Thanks!