|
Re: Thumb DV / DVstick 30
gpabon757
Hi,
I’m using DVStick 30 USB with the included USB-C to female USB A with my Google Pixel 4xl with no problems. I’m also using it with my older Surface Pro 3 with no problems. Good luck and you will enjoy this stick, it’s great. George
|
|
|
|
Re: ThumbDV on Pi 4
Check the files section under this group.
|
|
|
|
Re: ThumbDV on Pi 4
ed <wa6yvx@...>
I downloaded the Pi OS image and put it into my Pi 4. I attempted to download the ambeserver and here is what I get: What is the correct procedure ?.......Ed
pi@raspberrypi:~ $ sudo apt-get install ambeserver Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package ambeserver
|
|
|
|
Re: ThumbDV on Pi 4
ed <wa6yvx@...>
Thanks John, that ran me around in a circle for a few hours!.....Ed
-----Original Message-----
From: John D Hays - K7VE <john@...> To: ambe@nw-digital-radio.groups.io Sent: Wed, Jun 17, 2020 11:16 am Subject: Re: [ambe] ThumbDV on Pi 4 Ed,
The RPi4 requires the newer Raspberry Pi OS (formerly Raspbian). RPi4 was released June 24, 2019 along with an updated kernel (4.19?) to support it. The 2018 Compass image would not have that support, and Compass is deprecated by UDRC/DRAWS™ support in Buster kernels.
John D. Hays
Kingston, WA K7VE
|
|
|
|
Re: ThumbDV on Pi 4
Ed, The RPi4 requires the newer Raspberry Pi OS (formerly Raspbian). RPi4 was released June 24, 2019 along with an updated kernel (4.19?) to support it. The 2018 Compass image would not have that support, and Compass is deprecated by UDRC/DRAWS™ support in Buster kernels.
--
John D. Hays Kingston, WA K7VE
|
|
|
|
Re: ThumbDV on Pi 4
ed <wa6yvx@...>
I have 2 Pi 4's with separate HDMI Monitors that work fine with the 2020-02-13-raspian-buster-full image on both Pi's.
I cannot get this 2018-12-31-compass-full image to display HDMI output on either Pi with this image. How do get this image to display on my HDMI monitor?
|
|
|
|
Re: ThumbDV on Pi 4
They were written a while ago. Use python2 (python2.7)
On Sun, Jun 14, 2020 at 8:12 AM David Dennis <dave@...> wrote:
--
John D. Hays Kingston, WA K7VE
|
|
|
|
Re: ThumbDV on Pi 4
John, What version of Python were these files written for? I’m not having much luck running under either 3.5 or 3.7
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of John D Hays - K7VE
Sent: Sunday, June 14, 2020 2:51 AM To: ambe@nw-digital-radio.groups.io Subject: Re: [ambe] ThumbDV on Pi 4
Look at https://nw-digital-radio.groups.io/g/ambe/wiki/1520#Quick-Build-on-Linux and the test files in the files section.
On Sun, Jun 14, 2020 at 12:27 AM John D Hays - K7VE via groups.io <john=hays.org@groups.io> wrote:
-- John D. Hays K7VE
|
|
|
|
Re: ThumbDV on Pi 4
Look at https://nw-digital-radio.groups.io/g/ambe/wiki/1520#Quick-Build-on-Linux and the test files in the files section.
--
John D. Hays Kingston, WA K7VE
|
|
|
|
Re: ThumbDV on Pi 4
There are a couple of different applications. We need to know what you are trying to do. What application and how you have set it up, etc.
|
|
|
|
Re: ThumbDV on Pi 4
ed <wa6yvx@...>
Thanks Guys, everything appeared to install correctly on the Pi 4, maybe I just don't know how to run it.
I haven't found the guide on how to do it yet..........Ed
-----Original Message-----
From: Patrick Perdue <patrick@...> To: ambe@nw-digital-radio.groups.io Sent: Sat, Jun 13, 2020 6:16 pm Subject: Re: [ambe] ThumbDV on Pi 4 I'm running it just fine on a Pi4 2GB. It works just as well
there as it does on my Pi2.
On 6/13/2020 9:04 PM, John D Hays -
K7VE wrote:
I know of no
reason why it should not work on RPi4. What are you trying to
do and what are you seeing happen?
Has anyone been able to get the ThumbDV to work on the Raspberry Pi4?........Ed John D.
Hays
Kingston, WA K7VE
|
|
|
|
Re: ThumbDV on Pi 4
Patrick Perdue
I'm running it just fine on a Pi4 2GB. It works just as well
there as it does on my Pi2.
On 6/13/2020 9:04 PM, John D Hays -
K7VE wrote:
|
|
|
|
Re: ThumbDV on Pi 4
I know of no reason why it should not work on RPi4. What are you trying to do and what are you seeing happen?
Has anyone been able to get the ThumbDV to work on the Raspberry Pi4?........Ed --
John D. Hays Kingston, WA K7VE
|
|
|
|
ThumbDV on Pi 4
ed <wa6yvx@...>
Has anyone been able to get the ThumbDV to work on the Raspberry Pi4?........Ed
|
|
|
|
Re: #thumbdv
#thumbdv
Ron - KA7RLM
Have a look at this discussion.........
https://nw-digital-radio.groups.io/g/ambe/topic/high_loss_with_thumbdv_on/8874299?p=Created,,,20,2,0,0&jump=1
|
|
|
|
Re: #thumbdv
#thumbdv
Your internet connection or wifi.
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> on behalf of k9kdj.HAM@... <k9kdj.HAM@...>
Sent: Friday, June 12, 2020 2:46:54 PM To: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> Subject: [ambe] #thumbdv I have a new thumbdv that seems to be working well with Bluedv. On DSTAR, no issues. On DMR, however, when I view my transmission on a pi-star dashboard, I show between 10% and 30% loss. What adjustments do I make to decrease that loss. I do not see that
with any of my DMR radios that I check in the same talkgroups.
Many thanks. Ken
|
|
|
|
#thumbdv
#thumbdv
k9kdj.HAM@...
I have a new thumbdv that seems to be working well with Bluedv. On DSTAR, no issues. On DMR, however, when I view my transmission on a pi-star dashboard, I show between 10% and 30% loss. What adjustments do I make to decrease that loss. I do not see that with any of my DMR radios that I check in the same talkgroups.
Many thanks. Ken
|
|
|
|
Correct. Thanks.
On Mon, Jun 8, 2020 at 10:56 PM alpha foxtrotsix <alphafoxtrotsix@...> wrote:
|
|
|
|
alpha foxtrotsix
So it sounds like you are good now.
On Mon, Jun 8, 2020, 20:49 <kh6dan@...> wrote: Boom as in it's not connecting to the software. The FTDI drivers were apparently outdated. Updated the driver and it connected .
|
|
|
|
Boom as in it's not connecting to the software. The FTDI drivers were apparently outdated. Updated the driver and it connected .
|
|
|