Date   

Soundcard Problem

John Swisher
 

I have a Dell Latitude 5480 i7/win 10. Everything is working except when I go to transmit. A soundcard error pops up and it won’t transmit. Then onboard sound is Realtek. Any help would greatly be appreciated.
John AB4O 


Re: Promblems with Dv33 Stick from GUUs and Baud 921600 on Linux.

 

Hi Sven,

The dv33 is not a product of NW Digital Radio, so please contact the manufacturer for support.

The invocation of ambeserver@ThumbDV  is exclusive to the ThumbDV™ you must discover what port your AMBE device
 is using (eg ttyUSB0) and modify your startup accordingly.  

From the README

Using the included service file, the operating parameters are taken from configuration files located in /etc/opendv. You may edit these files to use a different network port and device file. If you need to create a new configuration, simply copy a configuration file and name it with ambeserver-devicename.conf where devicename is the device file in /dev such as

sudo cp /etc/opendv/ambeserver-ttyUSB0.conf /etc/opendv/ambeserver-ttyUSB1.conf

A special device is created by udev for the ThumbDV™ by the file 99-thumbdv.rules as part of this install. When a ThumbDV™ is plugged into a USB port, this rule causes udevd to detect it and create a link between /dev/ThumbDV and the enumerated USB port, e.g. /dev/ttyUSB0. If the ThumbDV™ lands on a different USB port such as /dev/ttyUSB2, the link moves to that port.

If for example, the device is at /dev/ttyUSB0 and you have modified /etc/opendv/ambeserver-ttyUSB0.conf 
to account for the baud rate.  Then

sudo systemctl disable ambeserver@ThumbDV
sudo systemctl stop ambeserver@ThumbDV
sudo systemctl enable ambeserver@ttyUSB0
sudo systemctl start ambeserver@ttyUSB
sudo systemctl status ambeserver@ttyUSB0



On Fri, Dec 4, 2020 at 1:06 PM <svenjaensch@...> wrote:
Having big trouble here.
We will change the DV3000 devices to an dv33 stick.
We are running an ambe server from git and make correct install but the stick with newest drivers and implementation was found but ambed dont started.
I know that the stick will run with the complete install from lucs xlx server but we have an xlx server on running on a server im web and currently the dv sticks local and ip and portbinding between ambeserver and xlx-master.
I think the ambe dont support newer dv33 sticks or the baudrate. Any Ideas to run the dv33 stick under ambe server local here.

Under Win the stick runs fine with bluedv for win and dv33 in bluedv and 921600bd in software and in system config for the stick in hardwaremananger.

thanks in advance
regards Sven DO5SPA



--
John D. Hays
Kingston, WA
K7VE

 


Promblems with Dv33 Stick from GUUs and Baud 921600 on Linux.

svenjaensch@...
 

Having big trouble here.
We will change the DV3000 devices to an dv33 stick.
We are running an ambe server from git and make correct install but the stick with newest drivers and implementation was found but ambed dont started.
I know that the stick will run with the complete install from lucs xlx server but we have an xlx server on running on a server im web and currently the dv sticks local and ip and portbinding between ambeserver and xlx-master.
I think the ambe dont support newer dv33 sticks or the baudrate. Any Ideas to run the dv33 stick under ambe server local here.

Under Win the stick runs fine with bluedv for win and dv33 in bluedv and 921600bd in software and in system config for the stick in hardwaremananger.

thanks in advance
regards Sven DO5SPA


Re: temalin48@gmail.com wants you to join them on Mint & save a fox ton on wireless

alpha foxtrotsix
 

What is the expected shipping date for the backordered ThumbDV? I ordered one as a gift for a fellow ham.

73 de AF6BY

Jeff
.- ..-. -.... -... -.--




temalin48@gmail.com wants you to join them on Mint & save a fox ton on wireless

Wa4kfz
 

Advertising? Hacked newsgroup??

73,
Mark WA4KFZ 


Begin forwarded message:

From: Terry Malin <Temalin48@...>
Date: November 1, 2020 at 3:58:39 PM EST
To: ambe@nw-digital-radio.groups.io
Subject: [ambe] temalin48@... wants you to join them on Mint & save a fox ton on wireless
Reply-To: ambe@nw-digital-radio.groups.io


Switching to Mint is a win-win. Your friend wants you to try Mint Mobile.
 
Mint Mobile
 
 

Terry Malin is on Mint Mobile saving a ton on their wireless bill, and wants you to join them.

The really great part is, if you sign up using their unique link, you get $15 applied to your account, and your friend will also earn renewal credit. 

Our plans start at just $15 bucks a month, and include unlimited talk and text, plus high speed data.

Need more convincing? Here's a note from Terry Malin:

"Join me on Mint where I am saving a fox ton on wireless. Plans start at just $15 bucks, and include high speed data, plus unlimited talk and text. Use my unique link and you'll get $15 added to your Mint account, and I'll get free Mint too. Win-win"

Virtual high five,

Mint Fox
 
All our plans come with
No referral needed to follow us
 

NEED A HELPING PAW?

+1.800.683.7392 | mintmobile.com/help

17870 Newhope Street #104-155, Fountain Valley, CA 92708
© 2020 Mint Mobile. All Rights Reserved


Oh you're still reading? Here's the legal stuff ... Referral credits limited to 10 referrals. Must have an active Mint account. Friend credits awarded for new customers only. May not be combined with other offers. Terms subject to change. See full rules at www.mintmobile.com/referral-terms/

Unsubscribe

Powered by: friendbuy

 
 
Facebook Instagram Twitter YouTube


temalin48@gmail.com wants you to join them on Mint & save a fox ton on wireless

Terry Malin
 

Switching to Mint is a win-win. Your friend wants you to try Mint Mobile.
 
Mint Mobile
 
 

Terry Malin is on Mint Mobile saving a ton on their wireless bill, and wants you to join them.

The really great part is, if you sign up using their unique link, you get $15 applied to your account, and your friend will also earn renewal credit. 

Our plans start at just $15 bucks a month, and include unlimited talk and text, plus high speed data.

Need more convincing? Here's a note from Terry Malin:

"Join me on Mint where I am saving a fox ton on wireless. Plans start at just $15 bucks, and include high speed data, plus unlimited talk and text. Use my unique link and you'll get $15 added to your Mint account, and I'll get free Mint too. Win-win"

Virtual high five,

Mint Fox
 
All our plans come with
No referral needed to follow us
 

NEED A HELPING PAW?

+1.800.683.7392 | mintmobile.com/help

17870 Newhope Street #104-155, Fountain Valley, CA 92708
© 2020 Mint Mobile. All Rights Reserved


Oh you're still reading? Here's the legal stuff ... Referral credits limited to 10 referrals. Must have an active Mint account. Friend credits awarded for new customers only. May not be combined with other offers. Terms subject to change. See full rules at www.mintmobile.com/referral-terms/

Unsubscribe

Powered by: friendbuy

 
 
Facebook Instagram Twitter YouTube


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

 

Gary,
Yes, I would as the task to change the band rate is quite intensive.
They are identical except for the band rate.
I will await your research.
Please let me know.
Thanks
73
Don
WB5EKU



On October 10, 2020, at 8:18 AM, Gary D Walborn <gwalborn@...> wrote:


Would you be interested in swapping your low speed unit for my high speed unit?

Gary
WB8LEA

On Fri, Oct 9, 2020, 8:18 PM Donald Jacob <wb5eku@...> wrote:
Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

Gary D Walborn <gwalborn@...>
 

Let me do a little research and get back to you.


On Sat, Oct 10, 2020, 11:22 AM John D Hays - K7VE <john@...> wrote:
That would be an excellent solution, should you decide to do so.

On Sat, Oct 10, 2020, 08:18 Gary D Walborn <gwalborn@...> wrote:
Would you be interested in swapping your low speed unit for my high speed unit?

Gary
WB8LEA

On Fri, Oct 9, 2020, 8:18 PM Donald Jacob <wb5eku@...> wrote:
Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

 

That would be an excellent solution, should you decide to do so.


On Sat, Oct 10, 2020, 08:18 Gary D Walborn <gwalborn@...> wrote:
Would you be interested in swapping your low speed unit for my high speed unit?

Gary
WB8LEA

On Fri, Oct 9, 2020, 8:18 PM Donald Jacob <wb5eku@...> wrote:
Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

Gary D Walborn <gwalborn@...>
 

Would you be interested in swapping your low speed unit for my high speed unit?

Gary
WB8LEA

On Fri, Oct 9, 2020, 8:18 PM Donald Jacob <wb5eku@...> wrote:
Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

 

Mike, thanks!
John sent it to me and it does look quite formatible for thesej old eyes!
73
WB5EKU

On Fri, Oct 9, 2020 at 5:52 PM VE3MIC via groups.io <ve3mic=yahoo.com@groups.io> wrote:
Hi Don. I recall reading a how-to from John Hays of NW Digital Radio, where he explains how to do "surgery" to an Original ThumbDV to change the baud rate from 230,400 to 460,800, I believe that it involved in cutting a couple of traces on the PCB and re-jumpering.
I'll see if I can locate the document.
73 de Mike

On Friday, October 9, 2020, 08:19:34 p.m. EDT, Donald Jacob <wb5eku@...> wrote:


Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

 

Hi John,
Yes, I would like to have my original one and my newer one run at the same baud rate
for a transcoder project.

On Fri, Oct 9, 2020 at 5:51 PM John D Hays - K7VE <john@...> wrote:
Don,


Changing the baud rate is not trivial.  Is there a particular reason you wish to change it?

On Fri, Oct 9, 2020, 17:18 Donald Jacob <wb5eku@...> wrote:
Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

VE3MIC
 

I see that John has replied.  I forgot to add that the procedure is not for the faint of heart, which is why John has asked why you wish to do it.
de Mike


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

VE3MIC
 

Hi Don. I recall reading a how-to from John Hays of NW Digital Radio, where he explains how to do "surgery" to an Original ThumbDV to change the baud rate from 230,400 to 460,800, I believe that it involved in cutting a couple of traces on the PCB and re-jumpering.
I'll see if I can locate the document.
73 de Mike

On Friday, October 9, 2020, 08:19:34 p.m. EDT, Donald Jacob <wb5eku@...> wrote:


Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

 

Don,


Changing the baud rate is not trivial.  Is there a particular reason you wish to change it?

On Fri, Oct 9, 2020, 17:18 Donald Jacob <wb5eku@...> wrote:
Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


Thumb DV Baud rate change #ambe #ambeserver #thumbdv

 

Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


ThumbDV ambeserver intermittent transmission #ambeserver #thumbdv

roylosbanes@...
 

Hello everyone, I recently setup ambeserver linke to peanut and to our YSF Reflector which is alos link to our club's repeater (Yaesu DR1X). We recently encountered intermittent transmissions when TX from Peanut App to C4FM. All other modes don't have any issues. So from Peanut to any other modes, TX is ok, RX to peanut from other modes also have no issues. So the main issue is why are we having intermittent transmissions from Peanut going to YSFReflector? Anyone here encountered the same issue?
-Setup:
ThumbDV connected to RPI3B+ with 30mbps internet connection
MMDVM Repeater setup for YSF connected to Motorola GM300>Linked to Yeasu DR1x

Thanks,
73 de 4I1AYZ


Re: order

Doug Waugh (KC0EQA)
 

 
Thank you, Bryan. Receive them monday and all working as expected. Glad I got them from you guys.

73's 
Doug KC0EQA
 


Re: order

 

Out of the Office Friday, took care of this already.

73
Bryan K7UDR


On Oct 3, 2020, at 6:53 AM, Doug Waugh (KC0EQA) <waughdj@...> wrote:

I just ordered a couple days ago, everything cleared, But haven't heard a word about it yet. Or even if I got the $20 discount. I emailed through support and haven't heard anything back either. I don't think anyone is even checking system for orders..


Re: order

Doug Waugh (KC0EQA)
 

I just ordered a couple days ago, everything cleared, But haven't heard a word about it yet. Or even if I got the $20 discount. I emailed through support and haven't heard anything back either. I don't think anyone is even checking system for orders..

241 - 260 of 1692