|
Re: thumbdv question
It does not have the P25 addition. That chip is more expensive.
On Fri, Nov 5, 2021 at 9:25 AM jimmy keffer <horsezip@...> wrote: is the chip in the thumbdv a ambe3000 or a ambe 3000-p25 --
John D. Hays Kingston, WA K7VE / WRJT-215
|
|
|
|
thumbdv question
is the chip in the thumbdv a ambe3000 or a ambe 3000-p25
|
|
|
|
Re: Help with USB-3006 that suddenly failed out of nowhere
w8mw
Disregard, I got to the datacenter and power cycled it physically and it came back to life.
Mike kb8zgl
|
|
|
|
ipsx2 host issue
for the 3 days any ipsc2 server says there ssl/tsl issue and to contact
the ipsc2 admim team i tried 2 computers the contact form at dmr-mark doesn't seam to do anything as when i hit send on it nothing happens jimmy any one else have this issue with bluedv
|
|
|
|
Help with USB-3006 that suddenly failed out of nowhere
w8mw
I am sorry if this is not the right group, I don't know where to ask about this one-off product bought a while ago.
My DV-3006 unit from NWDigitalRadio has been running great! Suddenly, it stopped. When I started Ambed I get this, any suggestions? Seems it can talk to the board, but not properly start up? Description : USB-3006 A Serial : XC337RG3A Description : USB-3006 B Serial : XC337RG3B Opening USB-3006_A:XC337RG3A device FTDI_read_bytes(4) failed : 0 USB-3003 soft reset failed
|
|
|
|
Re: ipsc2-texas
Try here for the info. I too would like to add to my blue DVD file if you figure it out. Randy My email is current on qrz. N5YTT
On October 15, 2021 9:43:47 AM "jimmy keffer" <horsezip@...> wrote:
|
|
|
|
ipsc2-texas
it seems ipsc2-texas is missing from bluedv's server list does anyone
have the server info for ipsc2-texas? thanks jimmy ka3vgm
|
|
|
|
Re: AMBE Server Transcoding DStar DMR
Patrick Perdue
I have a remote transcoder for a VPS-based XLX reflector. It works without issue for months at a time without needing to restart either the XLX or the transcoder (ambed). I'm not running the ThumbDV's on a Raspberry Pi anymore, but when
I did, I found that I got the best performance by using a powered
hub. N2DYI
On 10/5/2021 10:14 AM, TG9AOR wrote:
My case was similar to yours. My DMR source was Brandmeister at the time, my XLX resided in a VPS, and the transcoder hardware resided at QTH. It was until I installed XLX on QTH and had both XLX and transcoder in same place that all worked OK. Hope this helps you. 73
|
|
|
|
Re: AMBE Server Transcoding DStar DMR
TG9AOR
My case was similar to yours. My DMR source was Brandmeister at the time, my XLX resided in a VPS, and the transcoder hardware resided at QTH. It was until I installed XLX on QTH and had both XLX and transcoder in same place that all worked OK. Hope this helps you. 73
|
|
|
|
AMBE Server Transcoding DStar DMR
F4HWB
Hello
I'm install an AMBE Server with two USB ThumbDV on raspberry pi for my XLX105. The transcoding DStar DMR work in few time and stop. When transcoding working the light USB ThumbDV blink. When transcoding does't work the light USB ThumbDV not power. I must be restart my AMBE Server and transcoding work not long time 5 or 6 mn Somebody know why ? What do i do ? Thank you 73's Christophe F4HWB
|
|
|
|
EI3IBB Mark <markobyrnes@...>
Hi Gwen,
The Android version on Blue DV works perfectly fine with my DVstick 30 and best of all I can multitask, on my android tablet I can't do anything other than have blue DV on which is a real shame but with my Acer Chromebook I can browse the web and do what I want while Blue DV is running. Obviously the Android version isn't nearly as good as the Windows version which is really fantastic to be able to monitor all 3 digi modes and be able to select them so easily if one suddenly becomes active while on another. I use Globetrotter, it's amazing.
|
|
|
|
EI3IBB Mark <markobyrnes@...>
Hi Dave, Hey, just imagine blueDV in the car with Apple Car Play and Android Auto ? :-)
|
|
|
|
I deal with this by not running BlueDV on Linux. I run AMBEServer on Linux, with my ThumbDV on a powered hub connected to the Raspberry Pi running AMBEServer. With a dynamic DNS link and some port forwarding, I can connect to my ThumbDV from my Windows machines throughout the house, or with my Android phone anywhere I travel. I don't find the DV3000 sound driver bug to be a problem. If I HAD to run BlueDV on Linux, I wouldn't use a DV3000 device with it, that's all. Just a question for David...will BlueDV for Android run on a Chromebook that will run Android apps? If so, does a DV3000-based device work on the Chromebook with it? I've got a few Chromebooks lying about, one of which has GalliumOS Linux replacing ChromeOS, so I wouldn't expect that one to work. But does ChromeOS suffer from this driver bug? -=-=-=-=-=-=-=-=- 73, Gwen, NG3P
On Tue, Sep 28, 2021 at 5:42 PM David PA7LIM <info@...> wrote:
|
|
|
|
Hi,
toggle quoted messageShow quoted text
BlueDV is not going to work with an ambe3000 like globetrotter,thumbdv or dvstick30 under linux.
The reason for this is the sound driver that is not emulated correctly by mono. I can not change this.
David PA7LIM
On 28 Sep 2021, at 23:35, EI3IBB Mark via groups.io <markobyrnes@...> wrote:
|
|
|
|
EI3IBB Mark <markobyrnes@...>
Hi Dave, thanks for the reply, It connects to the Globetrotter and I can select D-Star, not tried fusion and DMR when I hit PTT it gives me dll error.
|
|
|
|
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io>
On Behalf Of EI3IBB Mark via groups.io
Sent: Sunday, September 26, 2021 10:30 PM To: ambe@nw-digital-radio.groups.io Subject: Re: [ambe] BlueDV Linux Request #bluedv #linux
So I did this, To use the latest BlueDV version on Linux:
|
|
|
|
Hi,
Greets and 73, David PA7LIM
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io>
On Behalf Of Balasubramanian Iyer via groups.io
Sent: Sunday, September 26, 2021 12:50 PM To: ambe@nw-digital-radio.groups.io Subject: Re: [ambe] BlueDV Linux Request #bluedv #linux
David Also we are not able to save the profile settings, i have given write permission also. But still not able to save.
Everytime we close and start all data is lost
73
On Sun, 26 Sep 2021 at 2:34 PM, David PA7LIM <info@...> wrote:
|
|
|
|
EI3IBB Mark <markobyrnes@...>
So I did this,
To use the latest BlueDV version on Linux:
How do I get it to run in Linux ?
|
|
|
|
EI3IBB Mark <markobyrnes@...>
Hi Dave, May I ask are you working on development of the Android version or IOS ? it would be really amazing to have a Windows style version for Android and IOS. Android version can't run in background or monitor all 3 digi modes like windows, the windows version is amazing! :-) I can't use my Globe Trotter with IOS that would be amazing. Globetrotter is also amazing! I'd pay a fee for IOS and Android versions no problem or even Windows so too would many People because blue dv is really excellent and with my bose headset and windows version the TX sound quality is really good compared to my Anytone 878 and Openspot 3, blue DV TX audio quality is really good once the TX audio levels are set up properly. Regards Mark
On Sun, Sep 26, 2021 at 10:04 AM David PA7LIM <info@...> wrote:
--
73's Mark EI3IBB
|
|
|
|
Install Linux Version of BlueDV on Chromebook ?
EI3IBB Mark <markobyrnes@...>
Trying via terminal but not very successful, anyone ever get it running and can share the commands please ?
|
|
|