Date   

Re: BlueDV AMBE auto start?

 

Hi Tom,

Sure.. no problem.. Like this?

Please sent me an email so I can sent you a test version. info@...

Greets,

   David PA7LIM


Op 13/11/2017 om 21:54 schreef Tom Cichowicz:

David;

   I have a server that I’m running the BlueDV AmbeServer on - I  reboot from time to time - so I have all the services I run autostart upon coming back up. Is there a way to have the server start by default? Or is the a command line switch I can use to do that?

-- 
 
  ☀️ KM4VIG
   🌴 ~TomC.

Sent by pressing a send button. 

--
Greets and 73, David PA7LIM


BlueDV AMBE auto start?

Tom Cichowicz <tcichowicz@...>
 

David;

   I have a server that I’m running the BlueDV AmbeServer on - I  reboot from time to time - so I have all the services I run autostart upon coming back up. Is there a way to have the server start by default? Or is the a command line switch I can use to do that?

-- 
 
  ☀️ KM4VIG
   🌴 ~TomC.

Sent by pressing a send button. 


Re: BlueDV AMBE for Android

 

Hi Giorgio,

Maybe. All depends on my private time. Adding DMR is a lot of work.

Greets,

    David PA7LIM


Op 13/11/2017 om 20:17 schreef Pagan, Giorgio:

Hi David, 
do you improve BlueDV with ambe server for DMR in android?

G

_________________________ _________________________
Giorgio Pagan OVS SpA

Direzione Tecnologie dell'Informazione - ICT Architectures

T +39 041 2398680

F +39 041 2398392

M +39 3406511284

giorgio.pagan@... 

Via Terraglio, 17

30174 Venezia Mestre, ITALY

www.ovs.it

 


2017-11-13 20:12 GMT+01:00 David PA7LIM <info@...>:

Hi Tom,

It does not support DMR. Only DSTAR.

Greets,

  David PA7LIM


Op 13/11/2017 om 20:02 schreef mi0ceo_geo@...:
On Sun, Nov 12, 2017 at 09:39 am, Tom Cichowicz wrote:
How did you change the DMR id? I cant change it on any of my devices (2 samsung tablets 1 huawei phone) thanks for any help

--
Greets and 73, David PA7LIM


This message intended exclusively for the addressee may contain privileged and confidential information.  If you are not the person authorized to use this email you shall not forward nor copy any part of it. If you received this message by mistake please notify us and then delete the message.  All reply messages may be used for professional reasons also by employees other then the addressee.


Questo messaggio destinato esclusivamente alle persone cui è indirizzato potrebbe contenere informazioni confidenziali la cui divulgazione è vietata. Se non si è destinatari o autorizzati a ricevere questo messaggio è proibito inoltrare quest’e-mail o copiare parte delle informazioni qui contenute.  Se il presente messaggio è stato ricevuto per errore Vi preghiamo di informarci e di cancellare il messaggio.  Qualunque messaggio di risposta ai fini dello svolgimento dell'attività lavorativa potrà essere letto anche da altri dipendenti.

--
Greets and 73, David PA7LIM


Re: BlueDV AMBE for Android

 

Hi Tom,

It does not support DMR. Only DSTAR.

Greets,

  David PA7LIM


Op 13/11/2017 om 20:02 schreef mi0ceo_geo@...:

On Sun, Nov 12, 2017 at 09:39 am, Tom Cichowicz wrote:
How did you change the DMR id? I cant change it on any of my devices (2 samsung tablets 1 huawei phone) thanks for any help

--
Greets and 73, David PA7LIM


Re: BlueDV AMBE for Android

mi0ceo_geo@...
 

On Sun, Nov 12, 2017 at 09:39 am, Tom Cichowicz wrote:
How did you change the DMR id? I cant change it on any of my devices (2 samsung tablets 1 huawei phone) thanks for any help


Re: BlueDV AMBE for Android

mi0ceo_geo@...
 

On Sun, Nov 12, 2017 at 09:39 am, Tom Cichowicz wrote:
How did you change the DMR id? I cant change it on any of my devices (2 samsung tablets 1 huawei phone) thanks for any help


Re: BlueDV AMBE for Android

 

 Yes, you should be able to do that -- the AMBEserver just needs to be on a public IP/Port

http://nwdigitalradio.com/putting-ambeserver-on-the-internet/

On Nov 13, 2017 07:12, "Pagan, Giorgio" <giorgio.pagan@...> wrote:
Hi David,
i can build a Public server to decode dmr with bluedv on my phone everywhere?

Thanks
Giorgio IW3IBG



Re: BlueDV AMBE for Android

mi0ceo_geo@...
 

unable to change DMR id all the other changes no problem? Help


Re: BlueDV AMBE for Android

 

Hi Jose,

There is no BlueDV AMBE for iOS. Apple is not a company that supports experimental things. 

Greets,
   David PA7LIM


Re: BlueDV AMBE for Android

Jose Manuel Martinez Barbera
 

and IOS too?



Enviado con Mailtrack

2017-11-13 10:34 GMT+00:00 David PA7LIM <info@...>:

HI John,

Yes, the AMBEServer protocol is fully compatible! You can use the BlueDV AMBE for Android also with the AMBEServer on Linux.

Greets,
   David PA7LIM



Re: BlueDV AMBE for Android

 

HI John,

Yes, the AMBEServer protocol is fully compatible! You can use the BlueDV AMBE for Android also with the AMBEServer on Linux.

Greets,
   David PA7LIM


Re: BlueDV AMBE for Android

Jose Manuel Martinez Barbera
 

Some possibility for Iphone with bluedv or buster?


Re: BlueDV AMBE for Android

 

David,

Is your AMBEserver protocol compatible with the one already available for Linux (Raspberry Pi) for those who might want to go that route?

John


Re: BlueDV AMBE for Android

Tom Cichowicz <tcichowicz@...>
 

David;

   Ok that worked (scrolling down) got it working - but kinda crashed I guess; and had to stop and restart the server. 

   Tested RX / TX - seems to work!



-- 
 
  ☀️ KM4VIG
   🌴 ~TomC.

Sent by pressing a send button. 

On Nov 12, 2017, at 12:50 PM, David PA7LIM <info@...> wrote:

Some values in the setup are disabled. Like DMR, Fusion etc.. 

Please scroll down to change the IP address. 

Greets,
   David PA7LIM


Re: BlueDV AMBE for Android

David Smith
 

Hey David,

Did Fusion get implemented into the program yet. Going to get a USB adapter
for my Android so I can operate on my Android.

David Smith
KA5DJS

Sunday, November 12, 2017 12:47 PM
Hey David,
    I knew you had made some changes. LOL.  I noticed the battery life right away.  I know some apps like EchoLink, Zello, TeamSpeak allow you to push the button on regular head sets to key up.  Hope that points you in the right direction.   I setup an experimental AllStar/EchoLink Node bridged over to D-Star on our "Carolina Link" a couple of weeks ago.  It works pretty well on your iOS/Android phone, but don't sound so great when someone links in an Analog Repeater. LOL.  So, this new app will come in handy for me.  I love being able to connect up while I'm working in the data centers in the evenings.  Look forward to seeing what you do next.  Take care & thanks again for everything you do!  73 de K4SQI!

Steve, K4SQI 




--
-----
Steve, kb7sqi@...

Virus-free. www.avast.com


Re: BlueDV AMBE for Android

Steven Blackford
 

Hey David,
    I knew you had made some changes. LOL.  I noticed the battery life right away.  I know some apps like EchoLink, Zello, TeamSpeak allow you to push the button on regular head sets to key up.  Hope that points you in the right direction.   I setup an experimental AllStar/EchoLink Node bridged over to D-Star on our "Carolina Link" a couple of weeks ago.  It works pretty well on your iOS/Android phone, but don't sound so great when someone links in an Analog Repeater. LOL.  So, this new app will come in handy for me.  I love being able to connect up while I'm working in the data centers in the evenings.  Look forward to seeing what you do next.  Take care & thanks again for everything you do!  73 de K4SQI!

Steve, K4SQI 

On Sun, Nov 12, 2017 at 1:38 PM, David PA7LIM <info@...> wrote:

Hi Steve,

Yes, I recoded most of the DSTAR code this weekend. Hope battery will hold longer now :-) 

Tomorrow I am going to test the BT carkit.  Hope I also can find a way to control the PTT from my driver wheel. That would be amazing. 
Keep in mind that ambe/PCM will consume some data over 3G/4G!

Greets,
   David




--
-----
Steve, kb7sqi@...


Re: BlueDV AMBE for Android

 

Hi Steve,

Yes, I recoded most of the DSTAR code this weekend. Hope battery will hold longer now :-) 

Tomorrow I am going to test the BT carkit.  Hope I also can find a way to control the PTT from my driver wheel. That would be amazing. 
Keep in mind that ambe/PCM will consume some data over 3G/4G!

Greets,
   David


Re: BlueDV AMBE for Android

Steven Blackford
 

Nice work David!  I have it working wonderfully here on my Android Phone.  It looks like you've done some work to save battery life.  Hope things are going well.  73 de K4SQI!

Steve, K4SQI

On Sun, Nov 12, 2017 at 1:14 PM, David PA7LIM <info@...> wrote:
Tested on nexus 5 and Samsung s7. Now looking for bt module that supports high speed. Most bt modules crash at night speed. 

Greets and 73'

  David PA7LIM

Sent from my iPad

On 12 Nov 2017, at 18:53, kyle@... wrote:

OTG USB speed not fast enough? - That's a bummer.
Is it possible that some phones and/or versions of Android would be faster than others?




--
-----
Steve, kb7sqi@...


Re: BlueDV AMBE for Android

 

Tested on nexus 5 and Samsung s7. Now looking for bt module that supports high speed. Most bt modules crash at night speed. 

Greets and 73'

  David PA7LIM

Sent from my iPad

On 12 Nov 2017, at 18:53, kyle@... wrote:

OTG USB speed not fast enough? - That's a bummer.
Is it possible that some phones and/or versions of Android would be faster than others?


Re: BlueDV AMBE for Android

kyle@...
 

OTG USB speed not fast enough? - That's a bummer.
Is it possible that some phones and/or versions of Android would be faster than others?