Date   

Re: Buster Input device not found after update MAC OS

Annaliese McDermond
 

For those of you waiting on this fix, I submitted it to the App Store today. It will automatically release when Apple approves it, so you should be set. Expect it to be version 1.2.1.

--
Annaliese McDermond (NH6Z)
Xenotropic Systems
mcdermj@xenotropic.com

On Jun 14, 2018, at 5:28 AM, rob_eke via Groups.Io <rob_eke=yahoo.com@groups.io> wrote:

Today i am running in a problem after updating MAC OS, Buster is not able to select a input audio source.

The output selection does work but not the input selection. So i can not make a transmission.
In the MAC audio setup menu the podcaster is visible an the audio meter is moving when speaking into the microphone.
I updates my MACmini 2012 to level HighSierra 10.13.5
Any ideas?

Yes i reset the NVRAM, pulled all the USB connection, pulled the power cord and waited 15 secs after restart. Reinstalled Buster......
Kind regards,
Rob, pa3eke


Re: Gateway update for D Star.

Dan White <dan@...>
 

Thanks. I will look into it. Dan
 

Sent: Thursday, June 14, 2018 8:12 PM
Subject: Re: [ambe] Gateway update for D Star.
 
Right now it doesn't appear you have a domain name for your gateway, but since you have w5sfa.org, go to your domain registrar and add a domain address record like
 
d-star.w5sfa.org IN A 74.118.151.43 and test to see if it goes to your dashboard.  Once it does, pass that domain name on to David.

Then go to Let's Encrypt and generate the necessary cert for your dashboard so it will quite throwing security warnings.  Your users will be happier.

Otherwise, you can use the information I provided earlier to fix your BlueDV install so that you can link.  Nothing can link without the proper address and apparently the BlueDV install doesn't have w5sfa, so it will need fixed.  Either by providing David with the requested data, or patching your install.
 
On Thu, Jun 14, 2018 at 5:59 PM, Dan White <dan@...> wrote:
John,
 
It is registered with the DPlus now. Our IP address is static. I am the trustee for the W5SFA repeaters but don’t do the Linux G3 portion. Our club web domain is W5SFA.org. Not sure if that is what you want.  Dan
 
 
Sent: Thursday, June 14, 2018 7:47 PM
Subject: Re: [ambe] Gateway update for D Star.
 
You should find the files under Documents\BlueDV and you can add a host to DPlus_Hosts.txt with the callsign and IP address of the gateway.  (You will need to use an editor that understands Linux line termination (not Notepad.exe)
 
Or you can pull new files from https://ar-dns.net 
 
On Thu, Jun 14, 2018 at 5:36 PM, John D. Hays <john@...> wrote:
Dan - what David is saying is he wants a domain name for it.  Check with the admin and get him a domain name for it and he will add it to BlueDV, then you should be able to link to it.
 
On Thu, Jun 14, 2018 at 5:30 PM, Dan White <dan@...> wrote:

[Edited Message Follows]

W5SFA is registered with D-Star Gateway Systems and has been working on the WinDV program. Just the BlueDV doesn't show W5SFA in the gateway list. Not sure why it needs more than one registration. AA4 shows to be the default in the program. This is a G3 system, People from all over log into our repeater and use it. So it must be in someone's list. Dan W5AOV


 
--


John D. Hays
Edmonds, WA
K7VE

   
 


 
--


John D. Hays
Edmonds, WA
K7VE

   
 


 
--


John D. Hays
Edmonds, WA
K7VE

   
 


Re: Gateway update for D Star.

 

Right now it doesn't appear you have a domain name for your gateway, but since you have w5sfa.org, go to your domain registrar and add a domain address record like

d-star.w5sfa.org IN A 74.118.151.43 and test to see if it goes to your dashboard.  Once it does, pass that domain name on to David.

Then go to Let's Encrypt and generate the necessary cert for your dashboard so it will quite throwing security warnings.  Your users will be happier.

Otherwise, you can use the information I provided earlier to fix your BlueDV install so that you can link.  Nothing can link without the proper address and apparently the BlueDV install doesn't have w5sfa, so it will need fixed.  Either by providing David with the requested data, or patching your install.

On Thu, Jun 14, 2018 at 5:59 PM, Dan White <dan@...> wrote:
John,
 
It is registered with the DPlus now. Our IP address is static. I am the trustee for the W5SFA repeaters but don’t do the Linux G3 portion. Our club web domain is W5SFA.org. Not sure if that is what you want.  Dan
 
 
Sent: Thursday, June 14, 2018 7:47 PM
Subject: Re: [ambe] Gateway update for D Star.
 
You should find the files under Documents\BlueDV and you can add a host to DPlus_Hosts.txt with the callsign and IP address of the gateway.  (You will need to use an editor that understands Linux line termination (not Notepad.exe)
 
Or you can pull new files from https://ar-dns.net 
 
On Thu, Jun 14, 2018 at 5:36 PM, John D. Hays <john@...> wrote:
Dan - what David is saying is he wants a domain name for it.  Check with the admin and get him a domain name for it and he will add it to BlueDV, then you should be able to link to it.
 
On Thu, Jun 14, 2018 at 5:30 PM, Dan White <dan@...> wrote:

[Edited Message Follows]

W5SFA is registered with D-Star Gateway Systems and has been working on the WinDV program. Just the BlueDV doesn't show W5SFA in the gateway list. Not sure why it needs more than one registration. AA4 shows to be the default in the program. This is a G3 system, People from all over log into our repeater and use it. So it must be in someone's list. Dan W5AOV


 
--


John D. Hays
Edmonds, WA
K7VE

   
 


 
--


John D. Hays
Edmonds, WA
K7VE

   
 




--


John D. Hays
Edmonds, WA
K7VE

   


Re: Gateway update for D Star.

Dan White <dan@...>
 

John,
 
It is registered with the DPlus now. Our IP address is static. I am the trustee for the W5SFA repeaters but don’t do the Linux G3 portion. Our club web domain is W5SFA.org. Not sure if that is what you want.  Dan
 
 

Sent: Thursday, June 14, 2018 7:47 PM
Subject: Re: [ambe] Gateway update for D Star.
 
You should find the files under Documents\BlueDV and you can add a host to DPlus_Hosts.txt with the callsign and IP address of the gateway.  (You will need to use an editor that understands Linux line termination (not Notepad.exe)
 
Or you can pull new files from https://ar-dns.net 
 
On Thu, Jun 14, 2018 at 5:36 PM, John D. Hays <john@...> wrote:
Dan - what David is saying is he wants a domain name for it.  Check with the admin and get him a domain name for it and he will add it to BlueDV, then you should be able to link to it.
 
On Thu, Jun 14, 2018 at 5:30 PM, Dan White <dan@...> wrote:

[Edited Message Follows]

W5SFA is registered with D-Star Gateway Systems and has been working on the WinDV program. Just the BlueDV doesn't show W5SFA in the gateway list. Not sure why it needs more than one registration. AA4 shows to be the default in the program. This is a G3 system, People from all over log into our repeater and use it. So it must be in someone's list. Dan W5AOV


 
--


John D. Hays
Edmonds, WA
K7VE

   
 


 
--


John D. Hays
Edmonds, WA
K7VE

   
 


Re: Gateway update for D Star.

 

You should find the files under Documents\BlueDV and you can add a host to DPlus_Hosts.txt with the callsign and IP address of the gateway.  (You will need to use an editor that understands Linux line termination (not Notepad.exe)

Or you can pull new files from https://ar-dns.net 

On Thu, Jun 14, 2018 at 5:36 PM, John D. Hays <john@...> wrote:
Dan - what David is saying is he wants a domain name for it.  Check with the admin and get him a domain name for it and he will add it to BlueDV, then you should be able to link to it.

On Thu, Jun 14, 2018 at 5:30 PM, Dan White <dan@...> wrote:

[Edited Message Follows]

W5SFA is registered with D-Star Gateway Systems and has been working on the WinDV program. Just the BlueDV doesn't show W5SFA in the gateway list. Not sure why it needs more than one registration. AA4 shows to be the default in the program. This is a G3 system, People from all over log into our repeater and use it. So it must be in someone's list. Dan W5AOV




--


John D. Hays
Edmonds, WA
K7VE

   




--


John D. Hays
Edmonds, WA
K7VE

   


Re: Gateway update for D Star.

 

Dan - what David is saying is he wants a domain name for it.  Check with the admin and get him a domain name for it and he will add it to BlueDV, then you should be able to link to it.

On Thu, Jun 14, 2018 at 5:30 PM, Dan White <dan@...> wrote:

[Edited Message Follows]

W5SFA is registered with D-Star Gateway Systems and has been working on the WinDV program. Just the BlueDV doesn't show W5SFA in the gateway list. Not sure why it needs more than one registration. AA4 shows to be the default in the program. This is a G3 system, People from all over log into our repeater and use it. So it must be in someone's list. Dan W5AOV




--


John D. Hays
Edmonds, WA
K7VE

   


Re: Gateway update for D Star.

Dan White <dan@...>
 
Edited

W5SFA is registered with D-Star Gateway Systems and has been working on the WinDV program. Just the BlueDV doesn't show W5SFA in the gateway list. Not sure why it needs more than one registration. AA4 shows to be the default in the program. This is a G3 system, People from all over log into our repeater and use it. So it must be in someone's list. Dan W5AOV


Re: Gateway update for D Star.

 

Hi David,

AA4RC provides a wildcard cert for *.dstargateway.org (e.g. w5sfa.dstargateway.org) and dynamic DNS for gateways that use his DPLUS software, but you have to request it.

As you say, one can get their own DNS name, and add a free cert for https (to avoid browser security warnings) from Let's Encrypt if the gateway operator does not use AA4RC's service.

The dashboard on many G2/G3 + DPLUS gateways run under https as does the one at w5sfa.

On Thu, Jun 14, 2018 at 11:51 AM, David PA7LIM <info@...> wrote:

Hi John,

I do not understand. You can buy a cheap DNS name like e.g. w5sfa.org and make an A record like:

gateway.w5sfa.org    IN  A     74.118.151.43

What has AA4RC to do with certs? Why do you need certs for your gateway?
If you need a cert I would advise the letsencrypt also! It is free and you only need to run a script every x months.

Greets and 73,

David PA7LIM

Op 14/06/2018 om 20:30 schreef John D Hays - K7VE:
If the gateway operator at W5SFA doesn't want to sign up for AA4RCs security certs and automatic Dynamic DNS, they can get a DNS name by an alternate means and use https://letsencrypt.org/ for a security script.

On Thu, Jun 14, 2018 at 11:26 AM, David PA7LIM <info@...> wrote:

Hi,

Please sent me the hostname/dns-name of the 74.118.151.43. IP addresses are not accepted anymore because DNS names can be adjusted by the reflector/repeater admins themselves.

Greets and 73,

David PA7LIM

Op 14/06/2018 om 19:11 schreef John D Hays - K7VE:
You need to add W5SFA 74.118.151.43 to the list in BlueDV.  Perhaps David is reading and can tell you how to do that? 

On Thu, Jun 14, 2018 at 5:46 AM, Dan White <dan@...> wrote:

[Edited Message Follows]

I can't use the Blue DV for our gateway W5SFA. When I update the list it is not there. Tried many times over the months. The gateway is registered and usable by others. Please advise. Thanks
Also, I am using w7pro 32 and ThumbDV 3000.



--


John D. Hays
Edmonds, WA
K7VE

   





--


John D. Hays
Edmonds, WA
K7VE

   





--


John D. Hays
Edmonds, WA
K7VE

   


Re: Gateway update for D Star.

 

Hi John,

I do not understand. You can buy a cheap DNS name like e.g. w5sfa.org and make an A record like:

gateway.w5sfa.org    IN  A     74.118.151.43

What has AA4RC to do with certs? Why do you need certs for your gateway?
If you need a cert I would advise the letsencrypt also! It is free and you only need to run a script every x months.

Greets and 73,

David PA7LIM

Op 14/06/2018 om 20:30 schreef John D Hays - K7VE:

If the gateway operator at W5SFA doesn't want to sign up for AA4RCs security certs and automatic Dynamic DNS, they can get a DNS name by an alternate means and use https://letsencrypt.org/ for a security script.

On Thu, Jun 14, 2018 at 11:26 AM, David PA7LIM <info@...> wrote:

Hi,

Please sent me the hostname/dns-name of the 74.118.151.43. IP addresses are not accepted anymore because DNS names can be adjusted by the reflector/repeater admins themselves.

Greets and 73,

David PA7LIM

Op 14/06/2018 om 19:11 schreef John D Hays - K7VE:
You need to add W5SFA 74.118.151.43 to the list in BlueDV.  Perhaps David is reading and can tell you how to do that? 

On Thu, Jun 14, 2018 at 5:46 AM, Dan White <dan@...> wrote:

[Edited Message Follows]

I can't use the Blue DV for our gateway W5SFA. When I update the list it is not there. Tried many times over the months. The gateway is registered and usable by others. Please advise. Thanks
Also, I am using w7pro 32 and ThumbDV 3000.



--


John D. Hays
Edmonds, WA
K7VE

   





--


John D. Hays
Edmonds, WA
K7VE

   



Re: Gateway update for D Star.

 

If the gateway operator at W5SFA doesn't want to sign up for AA4RCs security certs and automatic Dynamic DNS, they can get a DNS name by an alternate means and use https://letsencrypt.org/ for a security script.

On Thu, Jun 14, 2018 at 11:26 AM, David PA7LIM <info@...> wrote:

Hi,

Please sent me the hostname/dns-name of the 74.118.151.43. IP addresses are not accepted anymore because DNS names can be adjusted by the reflector/repeater admins themselves.

Greets and 73,

David PA7LIM

Op 14/06/2018 om 19:11 schreef John D Hays - K7VE:
You need to add W5SFA 74.118.151.43 to the list in BlueDV.  Perhaps David is reading and can tell you how to do that? 

On Thu, Jun 14, 2018 at 5:46 AM, Dan White <dan@...> wrote:

[Edited Message Follows]

I can't use the Blue DV for our gateway W5SFA. When I update the list it is not there. Tried many times over the months. The gateway is registered and usable by others. Please advise. Thanks
Also, I am using w7pro 32 and ThumbDV 3000.



--


John D. Hays
Edmonds, WA
K7VE

   





--


John D. Hays
Edmonds, WA
K7VE

   


Re: Gateway update for D Star.

 

Hi,

Please sent me the hostname/dns-name of the 74.118.151.43. IP addresses are not accepted anymore because DNS names can be adjusted by the reflector/repeater admins themselves.

Greets and 73,

David PA7LIM

Op 14/06/2018 om 19:11 schreef John D Hays - K7VE:

You need to add W5SFA 74.118.151.43 to the list in BlueDV.  Perhaps David is reading and can tell you how to do that? 

On Thu, Jun 14, 2018 at 5:46 AM, Dan White <dan@...> wrote:

[Edited Message Follows]

I can't use the Blue DV for our gateway W5SFA. When I update the list it is not there. Tried many times over the months. The gateway is registered and usable by others. Please advise. Thanks
Also, I am using w7pro 32 and ThumbDV 3000.



--


John D. Hays
Edmonds, WA
K7VE

   



Re: Gateway update for D Star.

 

You need to add W5SFA 74.118.151.43 to the list in BlueDV.  Perhaps David is reading and can tell you how to do that? 

On Thu, Jun 14, 2018 at 5:46 AM, Dan White <dan@...> wrote:

[Edited Message Follows]

I can't use the Blue DV for our gateway W5SFA. When I update the list it is not there. Tried many times over the months. The gateway is registered and usable by others. Please advise. Thanks
Also, I am using w7pro 32 and ThumbDV 3000.




--


John D. Hays
Edmonds, WA
K7VE

   


Gateway update for D Star.

Dan White <dan@...>
 
Edited

I can't use the Blue DV for our gateway W5SFA. When I update the list it is not there. Tried many times over the months. The gateway is registered and usable by others. Please advise. Thanks
Also, I am using w7pro 32 and ThumbDV 3000.


Buster Input device not found after update MAC OS

rob_eke
 

Today i am running in a problem  after updating MAC OS,  Buster is not able to select a input audio source.

The output selection does work but not the input selection. So i can not make a transmission.
In the MAC audio setup menu the podcaster is visible an the audio meter is moving when speaking into the microphone.
I updates my MACmini 2012 to level HighSierra 10.13.5
Any ideas?

Yes i reset the NVRAM, pulled all the USB connection, pulled the power cord and waited 15 secs after restart. Reinstalled Buster......
Kind regards,
Rob, pa3eke


Re: Where can I find documentation for setup of XC-3006

 


On Mon, Jun 4, 2018, 19:49 N9UMJ <n9umj2@...> wrote:
I received the XC-3006 today and looking for setup information for it.

Thanks N9UMJ


Where can I find documentation for setup of XC-3006

N9UMJ
 

I received the XC-3006 today and looking for setup information for it.

Thanks N9UMJ


Re: BlueDV AMBE won't work on J7 or J3

Richard W4JXA
 

Thank you for the response. My service provider is T-Mobile. And The Samsungs that I use j7 and j3 are T-Mobile devices with T-Mobile software on them from the factory I'm wondering if that's the problem?

73 W4JXA Rich


Re: BlueDV AMBE won't work on J7 or J3

Chris Andrist
 

My Samsung J3 works great with bluedvambe.

Regards,

Chris Andrist, KC7WSU
DMR-UTAH

On May 29, 2018, at 4:17 AM, Richard W4JXA via Groups.Io <w4jxa@...> wrote:

OTG works very well but can't connect to AMBE server using Samsung J7 nor J3.

LG 90 and two Alcatel tablets do connect to AMBE server. However I have not gotten the Alcatel to work on OTG. Also screen fit on 7 and 8 inch tablets was better before the update.
Thank you David for the OTG addition!!


BlueDV AMBE won't work on J7 or J3

Richard W4JXA
 

OTG works very well but can't connect to AMBE server using Samsung J7 nor J3.

LG 90 and two Alcatel tablets do connect to AMBE server. However I have not gotten the Alcatel to work on OTG. Also screen fit on 7 and 8 inch tablets was better before the update.
Thank you David for the OTG addition!!


Re: issue bluedv after last big windows update 1800

J G Shaw
 

All working now – had to reboot my laptop, then all started working.  Thanks

WA6PX


From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> on behalf of David PA7LIM <info@...>
Sent: Tuesday, May 22, 2018 6:54:15 PM
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] issue bluedv after last big windows update 1800

 

Hi,

Can you sent me a screenshot of the BlueDV setup screen and a screenshot of the windows device manager where I can see your serial ports?

info@...

Greets and 73,

David PA7LIM

Op 22/05/2018 om 20:51 schreef J G Shaw:

Yes, I agree – BlueDV for Windows is not working! 
Unlike before, it now “starts” and displays its screen on my PC.  But it does not allow me to use it.  Clicking the SERIAL button causes a small green light to flash on/off several times in the ThumbDV but then it stops and nothing else happens.  The screen says “Firmware     Not Detected”  It will not let me enable either the DSTAR or the DMR button.

 

I’ve attached a screen snip of BlueDV showing what I see.

 

WA6PX

 

From: ambe@nw-digital-radio.groups.io [mailto:ambe@nw-digital-radio.groups.io] On Behalf Of Jose Manuel Martinez Barbera
Sent: Tuesday, May 22, 2018 11:35 AM
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] issue bluedv after last big windows update 1800

 

Windv continue work nice but bluedv dont work 

ea8ee movil

 

El mar., 22 may. 2018 18:00, J G Shaw <WA6PX@...> escribió:

Yes – yesterday, BlueDV worked fine for me.  Today, BlueDV for Windows will not start.  Nothing shows up on the screen. 

I found myself wondering if it was do the overnight maintenance update Windows does.  What symptom/issue are you facing?

PS:  WinDV continues to work just fine - I can use WinDV on my PC for DSTAR via WinDV. 

       Thus, it appears to me that some unique file or action that BlueDV engages in is being forbidden by Windows.

Any ideas?

 

WA6PX 

 

From: ambe@nw-digital-radio.groups.io [mailto:ambe@nw-digital-radio.groups.io] On Behalf Of Jose Manuel Martinez Barbera
Sent: Tuesday, May 22, 2018 9:41 AM
To: ambe@nw-digital-radio.groups.io
Subject: [ambe] issue bluedv after last big windows update 1800

 


 someone else has experienced issues with bluedv and the last update of windows?

ea8ee movil

 

1121 - 1140 of 1714