AMBE 3000 dongle not recognized by BlueDV
pikam@...
AMBE dongle is not seen by BlueDV. All I see is a flashing green light for about a second on the dongle then nothing happens, BlueDV screen shows no recognized hardware. HELP
Using Windows 10 and two versions of BlueDV software 9475 and 9570.
Was OK with Windows 7
Com ports are set correctly
Nga mihi
Peter Moore 13 Ruataniwha Street Waipawa 4210 068577340
|
|
Just a heads up for anyone upgrading to the latest version of BlueDv. Upon installing the upgrade BlueDV appeared to be working well. The only problem was I had no audio. I fought this for a couple of days before getting it resolved. Here is what finally worked….
Originally my system had the default audio driver which Win10 installed when I did the upgrade to Win10. That has always worked until this last install of BlueDV. After screwing around with a lot of things I finally went to the ASUS downloads section, ( maker of my motherboard ) and I downloaded the audio driver for my specific motherboard for Win10. Installing that fixed it!
Honestly I have my doubts the driver was the problem. I think the act of installing a new driver reset something in my system that was keeping it from working. I only post this in case someone else has the same issue maybe this will save them some time troubleshooting.
Regards, David N5BOC
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of David PA7LIM
Sent: Monday, December 23, 2019 10:56 AM To: ambe@nw-digital-radio.groups.io Subject: Re: [ambe] error when saving setup #bluedv #thumbdv
Upgrade to the latest version 9570 and select an YSF reflector in the setup. Then save.
Greets and 73, David PA7LIM
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of Merle Watts via Groups.Io
I have a thumbdv and BlueDV for windows.
|
|
David is the author and authority, please follow his direction on BlueDV.
On Mon, Dec 23, 2019 at 8:56 AM David PA7LIM <info@...> wrote:
--
John D. Hays Kingston, WA K7VE
|
|
Ludovic Ludo
You have not the last version i suppose.
So update it. Best regards, Ludovic - F5PBG
|
|
if.only@...
Hi, I too had this problem, on Windows 10 I got the PC to use a suitable mode which turned out to be Windows 8 for that particular prog. and it worked fine then.
Hope that helps. M3VWU
|
|
Upgrade to the latest version 9570 and select an YSF reflector in the setup. Then save.
Greets and 73, David PA7LIM
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io>
On Behalf Of Merle Watts via Groups.Io
Sent: Wednesday, 18 December 2019 23:58 To: ambe@nw-digital-radio.groups.io Subject: [ambe] error when saving setup #bluedv #thumbdv
I have a thumbdv and BlueDV for windows.
|
|
Cannot make to connection to Brandmeister network
Is there anyway to eliminate this message at the start up of the program? “Cannot make connection to Brandmeister network “. I get it about 50% of the time or more when I start up. All I have to do is click ok and the program runs with no issues. I'm using the latest software.
Frank, W2SDR
|
|
Merle Watts
I have a thumbdv and BlueDV for windows.
About 2 yrs ago I was in Asia using DMR. and everything was working fine. I updated BlueDV on my laptop and I could no longer get the settings to save. I get an error that says "Object reference not set to an instance of an object". After returning to the US I started getting the same error on my desktop. Any ideas? It's been 2 yrs now and it still doesn't work on either the laptop or the desktop. Both have windows 10.
|
|
Re: Original ThumbDV and AMBED
Jamie R. Cid <jay@...>
Ok, Thank you!
|
|
Re: Original ThumbDV and AMBED
Yes, I believe so.
On Mon, Oct 21, 2019 at 8:42 AM Jamie R. Cid <jay@...> wrote: Ow so itll always show 0 unless there's multiple? --
John D. Hays Kingston, WA K7VE
|
|
Re: Original ThumbDV and AMBED
Jamie R. Cid <jay@...>
Ow so itll always show 0 unless there's multiple?
|
|
Re: Original ThumbDV and AMBED
Jamie. This is just showing 1 device. Ambed needs at least two channels.
On Mon, Oct 21, 2019, 07:37 Jamie R. Cid <jay@...> wrote: Hi Scott,
|
|
Re: Original ThumbDV and AMBED
Jamie R. Cid <jay@...>
Hi Scott,
I'm confused, your first post already states that its a "ThumbDV" why would you change it again?? I have the same issue with the new InternetLabs DV3k I'm trying to get working. I did change the baud to 230400 and recompiled with no change. Any ideas? Initializing vocodecs: Detected 1 USB-FTDI devices Description : USB-3000 Serial : DA4AIASF (Changed from DV3k to USB-3000) Codec interfaces initialized successfully : 0 channels available Initializing controller AMBEd started and listening on 127.0.0.1 73,
|
|
Spiros Xanthopoulos
Hi All...Yesterday everything was working ok, today windows says the application BlueDV has a virus...seen this already but dont know where...Please advice..73 de sv2evs
|
|
Re: issue bluedv after last big windows update 1800
Spiros Xanthopoulos
Same problem here, its not working....
|
|
Re: issue bluedv after last big windows update 1800
Spiros Xanthopoulos
I was wondering what is wrong with my computer....BlueDV is not working here also...help needed !!!
73 de sv2evs
|
|
Re: issue bluedv after last big windows update 1800
BlueDV Windows working perfectly here as of Sept 6, 2019 with DStar and DMR
toggle quoted messageShow quoted text
73 WB5EKU
On Fri, Sep 6, 2019 at 1:10 PM Tom Corcoran <tcorcoran@...> wrote:
|
|
Re: issue bluedv after last big windows update 1800
Hello Kev,
any luck resolving the PTT mapping issue with AMBEBlueDV? Tom VE3NY
|
|
NW Digital Radio availability September 6-8th
The NW Digital Radio team will be attending the Digital Summer Gathering this weekend. Email service at the camp is very limited. Requests for support, either technical or sales, will likely not be reviewed until Monday, so please be patient if looking for assistance. This is a great annual event in the Seattle area. If you happen to be in the area, drop by and meet the team.
|
|
Re: ThumDV to convert p25 phase 1 AMBE frames to pcm audio?
#thumbdv
davebelle85@...
Ah ok, cool. Thanks for that. So in theory if I can convert the frames from IMBE to AMBE it should work. Great! Thanks.
|
|