Hi, I’m using DVStick 30 USB with the included USB-C to female USB A with my Google Pixel 4xl with no problems. I’m also using it with my older Surface Pro 3 with no problems. Good luck and you

Check the files section under this group. Also read https://nw-digital-radio.groups.io/g/ambe/wiki/1520#Quick-Build-on-Linux

I downloaded the Pi OS image and put it into my Pi 4. I attempted to download the ambeserver and here is what I get: What is the correct procedure ?.......Ed pi@raspberrypi:~ $ sudo apt-get install

Thanks John, that ran me around in a circle for a few hours!.....Ed

Ed, The RPi4 requires the newer Raspberry Pi OS (formerly Raspbian). RPi4 was released June 24, 2019 along with an updated kernel (4.19?) to support it. The 2018 Compass image would not have that

I have 2 Pi 4's with separate HDMI Monitors that work fine with the 2020-02-13-raspian-buster-full image on both Pi's. I cannot get this 2018-12-31-compass-full image to display HDMI output on either

They were written a while ago. Use python2 (python2.7) -- John D. Hays Kingston, WA K7VE

John, What version of Python were these files written for? I’m not having much luck running under either 3.5 or 3.7 Thanks!

Look at https://nw-digital-radio.groups.io/g/ambe/wiki/1520#Quick-Build-on-Linux and the test files in the files section. -- John D. Hays Kingston, WA K7VE

There are a couple of different applications. We need to know what you are trying to do. What application and how you have set it up, etc.

Thanks Guys, everything appeared to install correctly on the Pi 4, maybe I just don't know how to run it. I haven't found the guide on how to do it yet..........Ed

I'm running it just fine on a Pi4 2GB. It works just as well there as it does on my Pi2.

I know of no reason why it should not work on RPi4. What are you trying to do and what are you seeing happen? -- John D. Hays Kingston, WA K7VE

Has anyone been able to get the ThumbDV to work on the Raspberry Pi4?........Ed

Have a look at this discussion......... https://nw-digital-radio.groups.io/g/ambe/topic/high_loss_with_thumbdv_on/8874299?p=Created,,,20,2,0,0&jump=1

Your internet connection or wifi. Get Outlook for Android

I have a new thumbdv that seems to be working well with Bluedv. On DSTAR, no issues. On DMR, however, when I view my transmission on a pi-star dashboard, I show between 10% and 30% loss. What

Correct. Thanks.

So it sounds like you are good now.

Boom as in it's not connecting to the software. The FTDI drivers were apparently outdated. Updated the driver and it connected .