Ok fine, this is a new update because i do that some days ago. :) Thank's for the information. It is ok now. Best regards, Ludovic - F5PBG.

open BlueDV application, if serial start at the beginning stop then. Next press Update on app menu select "Update Call database" and thats all. -- 73's *********************************** CT1JIB /

I’m not sure about this problem, I suddenly had a smaller GUI on my Windows screen which cut off part of the info being displayed. It wouldn’t allow any mod to the BlueDV screen display... no

Hello, i use the DVStick 30 from auria.nl On BlueDV last version i have not Call and name but ID in the call case : It is ok on the BlueDV

I misspoke : The feature exists but you have to activate "start/stop beep". For my part, the "start/stop beep" do not interest me because in reception of a QSO, i do not like this

Thanks to everyone who develops around the key DVSTick 30 and especially to PA7LIM. . Good ideo to have a setting of kill timer. I sometimes speak after the time-out because I do not always realize

Thanks to everyone who develops around the key DVSTick 30 and especially to PA7LIM. . Good ideo to have a setting of kill timer. I sometimes speak after the

Just installed version 1.0.61 from Play store which has fixed the issue and also added PTT support.

It is not intended as a multi-user system. It is connectionless (UDP) so there is no session information for when a user is using it. Putting that type of control in would require changes both to the

These days I tried to run AMBE SERVER under Windows, Linux Rasbian and Linux Compass but the result was always the same, block after a few minutes of operation. I finally realized why my Ambe server

Marco, As a datapoint, I just checked my Pi / ThumbDV at home (running Compass), it has been running for 48 days now. The last time it was rebooted was due to me having to move it physically.

Ok Thank you, at the present i take power from the USB of the router, but tomorrow i will change whit a regular power supply and i hope i will fix the problem. My best 73 Marco / IK6IOQ

Hi Marco, A number of users have traced problems like this to an inadequate Power Supply. Make certain that you see 5V at the PI and that your connections are reliable. Thanks, Bryan K7UDR

Hallo, I installed AMBE servers with Raspberry and Compass Linux, so my problem is that it works well for a few hours but then stops and I have to restart the Raspberry. For your experience do you

Thank you for your advice. So I installed AMBE Server, but it doesn't run. root@debian:~# systemctl status ambeserver@... ● ambeserver@... - DV3000 Daemon Loaded: loaded

i use 230400 bps because with this rate running on windows. I have tried 460800 but i get buffer size error.

[Moderator: Questions about the DVMEGA product should addressed to it's manufacturer. This port is included as a courtesy with respect to AMBEserver -- The first question is whether this device baud

I have one on the shelf to be put to work at home - and the second in the netbooks go-bag for use on the road. Now if I ever get my portable Linux 'server' running I'll need yet another. Bill

Thanks John Just ordered a Draws and GPS I'll place another order for the Thumb to put on the shelf as a backup and save a few $$ Rick

Absolutely nothing. It's a manufacturability change, mostly support parts on the PCB. The functionality and primary chips are the same as the current ThumbDV. -- John D. Hays Edmonds, WA K7VE