Date   

Re: sudo apt-get install ambeserver

Marco Della Cagna
 

Ok Tnx i will try Compass Linux.
73
Marco - IK6IOQ


Re: sudo apt-get install ambeserver

Ian
 

Marco,

There is a message, five messages back, that may provide you with some help.

Regards,
Ian..
link to message


sudo apt-get install ambeserver

Marco Della Cagna
 

hallo,
i try to install amberser on my Rapsberry but when i write in a terminal:
sudo apt-get install ambeserver
i receive this message:
pi@raspberrypi:~ $ sudo apt-get install AMBEServer
Reading package lists... Done
Building dependency tree      
Reading state information... Done
E: Unable to locate package AMBEServer
---------------------------------------------------
How can i fix this error ?
73 Marco - IK6IOQ


sudo apt-get install ambeserver

Marco Della Cagna
 

Hallo,
i try to install ambeserver and i digit:
sudo apt-get install ambeserver
But i have this message:
pi@raspberrypi:~ $ sudo apt-get install ambeserver
Reading package lists... Done
Building dependency tree      
Reading state information... Done
E: Unable to locate package ambeserver

How can do ?
Thank you for Help
Marco - IK6IOQ


Re: I want to run BlueDV AMBE Server on Debian.

js3cop@...
 

Hallo John,
I downloaded AMBEserver.c. And I compiled it with gcc. I found a.out just under root. I ran it.
I am using DVstick 30, but is this caused by?
root @ debian: ~ #. / a.out
AMBEserver: Starting ...
AMBEserver: Opened serial port / dev / ttyUSB 0 at 230400 bps.
AMBEserver: Could not find start byte in serial data
AMBEserver: error receiving response to reset
AMBEserver: Could not initialize the DV3K!

Thanks


Re: I want to run BlueDV AMBE Server on Debian.

Shuji Chiba
 

Many thanks John.

I am 76 years old but  have to learn about Linux much much much more. LOL

Shu

 

From: ambe@nw-digital-radio.groups.io [mailto:ambe@nw-digital-radio.groups.io] On Behalf Of John D Hays - K7VE
Sent: Monday, September 17, 2018 9:34 AM
To: ambe@nw-digital-radio.groups.io
Subject: Re: [ambe] I want to run BlueDV AMBE Server on Debian.

 

You should be able to build it on any Linux or Unix system.  Compass is Raspbian which is a version of Debian. 

 

On older Raspbian a special kernel had to be created to support the UDRC's sound chip, which became Compass. This is not a requirement with newer Raspbian Stretch, and not needed at all for the ThumbDV and AMBEserver. 

 

On Sun, Sep 16, 2018, 15:05 Shuji Chiba <jo3klssc@...> wrote:

Hello Jhon,

 Unfortunately I do not have much knowledge of Linux. But  I am very interested in his question as well.

Once I build AMBEserver with Compass on Raspberry Pi Zero W, it works comfortably.

Does your advice mean that the OS of AMBEserver must be Compass? Is there a way to build AMBEserver with Debian?

73

 

Shu

JA3GQJ


Re: I want to run BlueDV AMBE Server on Debian.

js3cop@...
 

Thank you Jhon,
I am using Debian stretch. Actually I want to make it in CentOS.
I think that Ambe server and reflector will run on CentOS, but I think that it is easier to use Debian.
Because commands etc. are common with Raspbian.


Re: I want to run BlueDV AMBE Server on Debian.

js3cop@...
 

I found a way to make raspberry pi's Ambe server image with the URL below.
https://nw-digital-radio.groups.io/g/ambe/wiki/home
Basically I think Raspbian is a derivative of Debian, so I can install it in Debian this way.
And what should you do the settings you taught?


Re: I want to run BlueDV AMBE Server on Debian.

 

You should be able to build it on any Linux or Unix system.  Compass is Raspbian which is a version of Debian. 

On older Raspbian a special kernel had to be created to support the UDRC's sound chip, which became Compass. This is not a requirement with newer Raspbian Stretch, and not needed at all for the ThumbDV and AMBEserver. 

On Sun, Sep 16, 2018, 15:05 Shuji Chiba <jo3klssc@...> wrote:

Hello Jhon,

 

Unfortunately I do not have much knowledge of Linux. But  I am very interested in his question as well.

Once I build AMBEserver with Compass on Raspberry Pi Zero W, it works comfortably.

Does your advice mean that the OS of AMBEserver must be Compass? Is there a way to build AMBEserver with Debian?

73

 

Shu

JA3GQJ


Re: I want to run BlueDV AMBE Server on Debian.

Shuji Chiba
 

Hello Jhon,

 

Unfortunately I do not have much knowledge of Linux. But  I am very interested in his question as well.

Once I build AMBEserver with Compass on Raspberry Pi Zero W, it works comfortably.

Does your advice mean that the OS of AMBEserver must be Compass? Is there a way to build AMBEserver with Debian?

73

 

Shu

JA3GQJ


Re: I want to run BlueDV AMBE Server on Debian.

 

There are two Ambeservers that run with BlueDV.  

Original AMBEserver is for Linux -- a quick build instruction is at https://nw-digital-radio.groups.io/g/ambe/wiki/AMBEserver-Addendum#Quick-Build-on-Linux
The author of BlueDV, created a version for Windows -- See http://software.pa7lim.nl/BlueDV-AMBEServer/

You can run AMBEserver on the network and access it from other programs over UDP.

On Sun, Sep 16, 2018 at 1:05 PM <js3cop@...> wrote:
I want to run BlueDV AMBE Server on Debian. I operate the reflector and the BlueDV AMBE Server with two raspberries pi. I want to operate these two with one Debian Server. Is this difficult for me? Today I installed the reflector on the Debian Server. After that I can only open various ports to Debian. However, I would like to set up BlueDV AMBE Server on this server. Is this difficult? If BlueDV AMBE works only on raspberry pi, or if the operation becomes unstable, is it better to move the raspberry pi OS virtually on Debian? However, I think that this plan is difficult because the OS of raspberry pi with BlueDV AMBE Server built in is available only with img. Is there a good idea?



--


John D. Hays
Edmonds, WA
K7VE

   


I want to run BlueDV AMBE Server on Debian.

js3cop@...
 

I want to run BlueDV AMBE Server on Debian. I operate the reflector and the BlueDV AMBE Server with two raspberries pi. I want to operate these two with one Debian Server. Is this difficult for me? Today I installed the reflector on the Debian Server. After that I can only open various ports to Debian. However, I would like to set up BlueDV AMBE Server on this server. Is this difficult? If BlueDV AMBE works only on raspberry pi, or if the operation becomes unstable, is it better to move the raspberry pi OS virtually on Debian? However, I think that this plan is difficult because the OS of raspberry pi with BlueDV AMBE Server built in is available only with img. Is there a good idea?


Re: XLX003 Reflector; Anna

Kenny Richards
 

The updated version of Buster showed up for me this morning in the AppStore update. I'm able to connect to XLX004 reflector now.

Thanks Anna!

Kenny


Re: XLX003 Reflector; Anna

Dick Herrick
 

Thanks, Anna.  I’ll check it out wen posted.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 14, 2018, at 11:45 PM, Annaliese McDermond <nh6z@...> wrote:

I was at the APRS Summer Gather in North Bend, WA last weekend hanging out with the rest of the NW Digital Radio crew and a bunch of other ham friends, so I didn’t have a chance to commit the code and push things up to the iTunes store.

I wrote the code earlier this evening and did some light testing to make sure it at least pretended to link to the XLX reflectors, and it seemed to work although I didn’t find one with any audio to listen to.

This version is 1.2.2 and is pushed up to the App Store for approval.  As soon as Apple approves, it’ll be marked for availability.

Incidentally, for those wondering why I don’t distribute this off of my own website, here’s the answer:

Buster includes geolocation and mapping functionality.  The “Location” field on your display is actually derived from any DPRS information carried with the connection.  In addition you should be able to click on that location to reveal a popup that contains a small map of where that location actually is.  Again, derived from the DPRS information from that transition.

To be able to use the Apple mapping and geolocation APIs, you have to distribute your app on the App Store and sandbox it.  Otherwise your app cannot connect to the proper services to make it work.  That’s why I do this and why it sometimes takes a while to get things reviewed and put on the store.

Also note that it appears as though opendstar.org is having some issues.  This causes Buster to not be able to get the reflector list and drop all the REF reflectors.  Once Robin fixes this, it should start working again.

--
Annaliese McDermond (NH6Z)
Xenotropic Systems
mcdermj@...


On Sep 14, 2018, at 5:37 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

Anna, did you post a revised version of Buster ??


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 3:44 PM, Annaliese McDermond <nh6z@...> wrote:

You shouldn’t have to do anything but upgrade off the App Store. 

—Anna


On Sep 6, 2018, at 11:27 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

OK. When you have it settled, let me know where to stuff the downloaded plist.

Thanks, Anna.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:24 PM, Annaliese McDermond <nh6z@...> wrote:

Without the new code, Buster won’t even look for it. Hold tight and I’ll get a new version out. 

—Anna


On Sep 6, 2018, at 11:15 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

Thanks, John.  Where do I put this in the Mac?  It must be deep in a Library.  Spotlight doesn’t find those files.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:08 PM, John D Hays - K7VE <john@...> wrote:

A new XLX plist file is available at https://ar-dns.net
On Thu, Sep 6, 2018 at 10:31 AM Dick Herrick via Groups.Io <rjherrickpe@...> wrote:
Thanks to both of you for considering a fix for this. The last time I waded into code it was Basic and before that Fortran. U can see how old I am !!
-- 

John D. Hays
Edmonds, WAK7VE












Re: XLX003 Reflector; Anna

Annaliese McDermond
 

I was at the APRS Summer Gather in North Bend, WA last weekend hanging out with the rest of the NW Digital Radio crew and a bunch of other ham friends, so I didn’t have a chance to commit the code and push things up to the iTunes store.

I wrote the code earlier this evening and did some light testing to make sure it at least pretended to link to the XLX reflectors, and it seemed to work although I didn’t find one with any audio to listen to.

This version is 1.2.2 and is pushed up to the App Store for approval. As soon as Apple approves, it’ll be marked for availability.

Incidentally, for those wondering why I don’t distribute this off of my own website, here’s the answer:

Buster includes geolocation and mapping functionality. The “Location” field on your display is actually derived from any DPRS information carried with the connection. In addition you should be able to click on that location to reveal a popup that contains a small map of where that location actually is. Again, derived from the DPRS information from that transition.

To be able to use the Apple mapping and geolocation APIs, you have to distribute your app on the App Store and sandbox it. Otherwise your app cannot connect to the proper services to make it work. That’s why I do this and why it sometimes takes a while to get things reviewed and put on the store.

Also note that it appears as though opendstar.org is having some issues. This causes Buster to not be able to get the reflector list and drop all the REF reflectors. Once Robin fixes this, it should start working again.

--
Annaliese McDermond (NH6Z)
Xenotropic Systems
mcdermj@xenotropic.com

On Sep 14, 2018, at 5:37 AM, Dick Herrick via Groups.Io <rjherrickpe=aol.com@groups.io> wrote:

Anna, did you post a revised version of Buster ??


Dick Herrick, BEE, PE
rjherrickpe@aol.com

(Office) 704-509-2882
(Cell) 704-995-1522

On Sep 6, 2018, at 3:44 PM, Annaliese McDermond <nh6z@nh6z.net> wrote:

You shouldn’t have to do anything but upgrade off the App Store.

—Anna


On Sep 6, 2018, at 11:27 AM, Dick Herrick via Groups.Io <rjherrickpe=aol.com@groups.io> wrote:

OK. When you have it settled, let me know where to stuff the downloaded plist.

Thanks, Anna.


Dick Herrick, BEE, PE
rjherrickpe@aol.com

(Office) 704-509-2882
(Cell) 704-995-1522

On Sep 6, 2018, at 2:24 PM, Annaliese McDermond <nh6z@nh6z.net> wrote:

Without the new code, Buster won’t even look for it. Hold tight and I’ll get a new version out.

—Anna


On Sep 6, 2018, at 11:15 AM, Dick Herrick via Groups.Io <rjherrickpe=aol.com@groups.io> wrote:

Thanks, John. Where do I put this in the Mac? It must be deep in a Library. Spotlight doesn’t find those files.


Dick Herrick, BEE, PE
rjherrickpe@aol.com

(Office) 704-509-2882
(Cell) 704-995-1522

On Sep 6, 2018, at 2:08 PM, John D Hays - K7VE <john@hays.org> wrote:

A new XLX plist file is available at https://ar-dns.net
On Thu, Sep 6, 2018 at 10:31 AM Dick Herrick via Groups.Io <rjherrickpe=aol.com@groups.io> wrote:
Thanks to both of you for considering a fix for this. The last time I waded into code it was Basic and before that Fortran. U can see how old I am !!
--

John D. Hays
Edmonds, WAK7VE



Re: XLX003 Reflector; Anna

Dick Herrick
 

Anna, did you post a revised version of Buster ??


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 3:44 PM, Annaliese McDermond <nh6z@...> wrote:

You shouldn’t have to do anything but upgrade off the App Store. 

—Anna


On Sep 6, 2018, at 11:27 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

OK. When you have it settled, let me know where to stuff the downloaded plist.

Thanks, Anna.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:24 PM, Annaliese McDermond <nh6z@...> wrote:

Without the new code, Buster won’t even look for it. Hold tight and I’ll get a new version out. 

—Anna


On Sep 6, 2018, at 11:15 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

Thanks, John.  Where do I put this in the Mac?  It must be deep in a Library.  Spotlight doesn’t find those files.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:08 PM, John D Hays - K7VE <john@...> wrote:

A new XLX plist file is available at https://ar-dns.net
On Thu, Sep 6, 2018 at 10:31 AM Dick Herrick via Groups.Io <rjherrickpe=aol.com@groups.io> wrote:
Thanks to both of you for considering a fix for this. The last time I waded into code it was Basic and before that Fortran. U can see how old I am !!
-- 


John D. Hays
Edmonds, WA
K7VE

   





BlueDV AMBE Audio Issue - display flashes between Listening & RX

Mike G4GOU
 

I am connecting BlueDV Ambe version 1.0.48 to my Ambe Server (with DVstick 30) remotely over the internet. 

This works well and without any issues on my Huawei P10. I also have an Inrico T320  (Quad core - MTK6737  Android 7.0 1Gb+8Gb ram) but when I run the application it connects to the Ambe server and connects to a reflector. However as soon as it receives any audio the display repeatedly flashes between Listening & RX. with a short beep over the received audio. When on transmit it is also slow at responding and exhibits similar issues with the audio,

I have also heard other users having success with a Samsung Note4, Nexus7 & Samsung S5 but with a RT4, Samsung S4 mini & Samsung Tablet the same issue with the audio is observed.

Does anyone know of a solution or of any PoC devices which it has been known to work?


Re: XLX003 Reflector; Anna

Dick Herrick
 

You jogged my memory on that one.  I haven’t used that for a long time.  As you say, it can be dangerous access.  Thanks for the reminder  


Dick Herrick, BEE, PE

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 3:57 PM, Tom Early <n7tae@...> wrote:

If you right-click on most any application and select "show package contents", you find interesting stuff. But be careful. Look, but don't touch, unless you know what you are doing!

Every Mac app icon points to a <APP NAME>.app directory.

You can see this more clearly with terminal, if you like command line.


On 09/06/2018 12:48 PM, Dick Herrick via Groups.Io wrote:
Very good.  Let me know when.  I would still like to be educated as to where to find these files in the “bowels” of the Mac !!


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 3:44 PM, Annaliese McDermond <nh6z@...> wrote:

You shouldn’t have to do anything but upgrade off the App Store. 

—Anna


On Sep 6, 2018, at 11:27 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

OK. When you have it settled, let me know where to stuff the downloaded plist.

Thanks, Anna.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:24 PM, Annaliese McDermond <nh6z@...> wrote:

Without the new code, Buster won’t even look for it. Hold tight and I’ll get a new version out. 

—Anna


On Sep 6, 2018, at 11:15 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

Thanks, John.  Where do I put this in the Mac?  It must be deep in a Library.  Spotlight doesn’t find those files.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:08 PM, John D Hays - K7VE <john@...> wrote:

A new XLX plist file is available at https://ar-dns.net
On Thu, Sep 6, 2018 at 10:31 AM Dick Herrick via Groups.Io <rjherrickpe=aol.com@groups.io> wrote:
Thanks to both of you for considering a fix for this. The last time I waded into code it was Basic and before that Fortran. U can see how old I am !!
-- 


John D. Hays
Edmonds, WA
K7VE

   





-- 
___________________________
73
n7tae (at) tearly (dot) net


Re: XLX003 Reflector; Anna

 

If you right-click on most any application and select "show package contents", you find interesting stuff. But be careful. Look, but don't touch, unless you know what you are doing!

Every Mac app icon points to a <APP NAME>.app directory.

You can see this more clearly with terminal, if you like command line.


On 09/06/2018 12:48 PM, Dick Herrick via Groups.Io wrote:
Very good.  Let me know when.  I would still like to be educated as to where to find these files in the “bowels” of the Mac !!


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 3:44 PM, Annaliese McDermond <nh6z@...> wrote:

You shouldn’t have to do anything but upgrade off the App Store. 

—Anna


On Sep 6, 2018, at 11:27 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

OK. When you have it settled, let me know where to stuff the downloaded plist.

Thanks, Anna.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:24 PM, Annaliese McDermond <nh6z@...> wrote:

Without the new code, Buster won’t even look for it. Hold tight and I’ll get a new version out. 

—Anna


On Sep 6, 2018, at 11:15 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

Thanks, John.  Where do I put this in the Mac?  It must be deep in a Library.  Spotlight doesn’t find those files.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:08 PM, John D Hays - K7VE <john@...> wrote:

A new XLX plist file is available at https://ar-dns.net
On Thu, Sep 6, 2018 at 10:31 AM Dick Herrick via Groups.Io <rjherrickpe=aol.com@groups.io> wrote:
Thanks to both of you for considering a fix for this. The last time I waded into code it was Basic and before that Fortran. U can see how old I am !!
-- 


John D. Hays
Edmonds, WA
K7VE

   





-- 
___________________________
73
n7tae (at) tearly (dot) net


Re: XLX003 Reflector; Anna

Dick Herrick
 

Very good.  Let me know when.  I would still like to be educated as to where to find these files in the “bowels” of the Mac !!


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 3:44 PM, Annaliese McDermond <nh6z@...> wrote:

You shouldn’t have to do anything but upgrade off the App Store. 

—Anna


On Sep 6, 2018, at 11:27 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

OK. When you have it settled, let me know where to stuff the downloaded plist.

Thanks, Anna.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:24 PM, Annaliese McDermond <nh6z@...> wrote:

Without the new code, Buster won’t even look for it. Hold tight and I’ll get a new version out. 

—Anna


On Sep 6, 2018, at 11:15 AM, Dick Herrick via Groups.Io <rjherrickpe@...> wrote:

Thanks, John.  Where do I put this in the Mac?  It must be deep in a Library.  Spotlight doesn’t find those files.


Dick Herrick, BEE, PE
rjherrickpe@...

(Office) 704-509-2882
(Cell)    704-995-1522

On Sep 6, 2018, at 2:08 PM, John D Hays - K7VE <john@...> wrote:

A new XLX plist file is available at https://ar-dns.net
On Thu, Sep 6, 2018 at 10:31 AM Dick Herrick via Groups.Io <rjherrickpe=aol.com@groups.io> wrote:
Thanks to both of you for considering a fix for this. The last time I waded into code it was Basic and before that Fortran. U can see how old I am !!
-- 


John D. Hays
Edmonds, WA
K7VE

   




1001 - 1020 of 1680