Tom AC2IE has built a GNU radio block for D-STAR using the ThumbDV.

I have built GNU Radio blocks to encode and decode DStar. These blocks use NWDigitalRadio's ThumbDV for the vocoding. My OOT (out-of-tree) module is at https://github.com/ac2ie/gr-ambe3000. The DStar

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ambe@nw-digital-radio.groups.io group. File:

The dutch-star.eu services are back online for WinDV users/ -- John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223

Thanks John Regards and 73 Peter R VK5NAQ Please remove my email address before forwarding this email Thanks

I'm hoping to get some information that will hopefully anwser why I've only got my Thumb DV partially working. I just got a Thumb DV - with a few hicups and some help from John Hays -- I was able

Dplus reflectors block unregistered users. Try xrf Or dcs reflectors.

Thanks again John, I'll give that a try for sure. ~TomC. Mobile: (941) 888-4519 Home : (941) 677-3914 Ham: KM4VIG Sent by pressing a send button.

I know this forum is really for the hardware aspect of the device, or at least I'm assuming it is. But I'm hoping I can get some help trying to understand the operational side of the device and

I'm hoping someone can help me or point me to a site that shows how to configure a Thumb DV hotspot dongle for DStar ? I finally got my callsign approved on W1SCC DStar repeater - I now need to

Just an UPDATE -- I'm up and running ..... disregard my previous post. The only thing I changed was the callsign server - I was using Free*Star; because the Dutch*Star kept giving me errors or

New documentation pages have been created in the Wiki

I administer a dstar system, W7VOI. It has worked well for a couple of years and continues to work adequately with a single anomaly. I can access and use the W7VOI system perfectly when accessing it

Hi Gary, I have just connected to W7VOI B with Buster and the connection seems to be working, though nobody is transmitting right now. (BTW, you can get a security certificate from AA4RC so you don't

Thank you John, that was helpful to know that it was probably my status within the larger network and not a software glitch in the gateway. The fact that it worked for you was important

Thank you John, that was helpful to know that it was probably my status within the larger network and not a software glitch in the gateway. The fact that it worked for you was important information. I

The addition of 2 terminals for W7JZU fixed the problem Thanks again John Gary W7JZU

Glad you were able to fix it. -- John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223

Thanks To John D. Haysi have nearly got the thumbdv pi 2 working i must have just one thing wrong will put what i have done with John D. Hays tomorrow and see if anyone can see were i have gone

could you please have a look at these snap shots and see were i am going wrong i have puy them on my own site so not to fill up yours http://g7icd.ddns.net/info/ cheers jim