To link you want to put REF001CL in the UR field. Once linked switch back to CQCQCQ.

at the moment it is trying REF001CL but it not connected yet but it will to REF035CL And i heard some one shout out on there i will leave it on that link and see if i hear more Thanks John

I gave you a call there, but you had disconnected. REF001 has a has a habit of going offline from time to time. REF030C is pretty active. Most reflectors have a dashboard such as

 ok i have put it on 030 see if i hear anything it says i have linked will lsn there

Hi All i have put a working image that only needs the call sign changing and port opened in router its stored on my private server http://g7icd.ddns.net/info/ hope it helps anyone out as

Jim; thanks for getting this working ... I'll be playing around with your image in the next few days. I'm downloading it as I type. It appears to be on a slow connection as it's showing 43mins

i am lsn on ref030c if you need any help as much as i can as i am a novice at Linux but am learning lol cheers jim

 yes on slow link it on my server in shack as it big file it would take a lot of space on a server cheers jim pc i and looking for dummyrepeater for windows so i can network still waiting on the

Not sure if it's related but 1C reflector has been VERY problematic these last few days it had dropped link more than 20x yesterday, other operators confirming the troubles. My dv mega hotspot

My next question to the group would be how and what software do i need to get a pc xp or win7 to connect to the pi using dummyrepeateri have the dummy reptaer installed on xp pro at moment i thought

You should be able to select NETWORK and the IP address and PORT of your AMBEserver. No additional software (beyond AMBEserveer) required. -- John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223

Yes its dropping the Link internationally as well -- I will respond to your email when I am Available

Reflector 20A is also experiencing Issues Larry w2LGB -- I will respond to your email when I am Available

Darren Storer says that the REF001 address should always be referenced by its domain name ref001.dstargateway.org (which means it may change physical IP address from time to time). Edit

John, Is this required for the UDRC as well as I cannot connect to any reflectors now just DCS reflectors Larry w2LGB -- I will respond to your email when I am Available

Anything that uses ircddbgateway Here is a little procedure to change all IP based REFxxx references to use their DNS name instead. (For Compass Linux location for DPlus_Hosts.txt file) == watch for

Thank you John I'll have to give that a try Larry W2LGB

I read some were that you can but dummyrepeater into tx via pin 3 to grn via a 220k resister ? if thats right what i do you set the the controller section too ? my project is all starting to comming

i found the post and tryed it yesterday i connected a wire to pin 3 but dummy repeater stopped working i have to reindtall the back up image now today i looked and i am a bit lossed some images of

This page has a good picture of the Raspberry Pi GPIO pinout. http://www.raspberrypi-spy.co.uk/2012/06/simple-guide-to-the-rpi-gpio-header-and-pins/ The pins are definitely 1,3,5,7... in a row. -