Hello I would like to do an AMBE server which transcode DSTAR <-> DMR My AMBE Server work correctly with one ThumbDV3000. I receive my second ThumbDV3000. I stop/start the AMBE Server with two

My experience with software for a DVAP and a ThumbDV has been far from satisfactory in terms of software support . Andy K3UK

I have been using BlueDV. Just thought I would try something else. I guess ti's time to move on.

The author has not actively supported it for a long time (years). Try BlueDV instead. -- John D. Hays Kingston, WA K7VE

Does anyone know what has happened to the WinDV site? I'd like to give it a try. The dutch-star.eu/software site times out.

I would disagree -- because I have a device almost identical to the ThumbDV -- it is a DV3K AMBE USB dongle, and it works in the same dock just fine. I'm aware both the ThumbDV and DV3K USB dongles

Maybe the dock isn't properly powering the ThumbDV? I have my ThumbDV on a RasPi III with a powered hub attached. It absolutely will not work on an unpowered hub, or one that has too little power. The

I assume the ThumbDV is using an FTDI device for the USB to Serial conversion. I’ve noticed similar issues when not plugged directly into the PC. This is compared to a Powered Hub. I’m

Bryan, I also have a Thumb DV which I purchased last November. I’ve tried to run it on a variety of pc’s with Windows 10 & 7 with no success, it never shows up in device manager and no led’s

HAH! That was it! Connecting the ThumbDV directly to the laptop's embedded USB port works. Connecting it to a Dell laptop dock (powered) does not. Of course, that's terribly frustrating. The point of

Dave, I’m baffled. It looks fine. We only change a few values, as you can see in the script, and the manufacturing date is entered by hand and it is correct as well. Are you direct connected to the

Here's the dump: dave@Moonquake:~/projects/hamradio/NorthwestDigitalRadio/ftx-prog$ ./ftx_prog --dump ftx_prog: version 0.3 Modified for the FT-X series by Richard Meadows Based upon: ft232r_prog:

OK, in that case follow the instructions for fix_prog and run sudo ./ftx_prog —dump

So there's nothing I can do to program it here? I am a software developer and used to build Palm Treo smartphones 10 years ago... Willing to sign a NDA... -- - Dave W3DJS

Send it back anyways. The port detect depends on the EEPROM being programmed correctly.

It means the ThumbDV is good. Did both Green/Red LEDs flash?

The autodetect isn't working, but I found a port specification in your script, so here are those results: What does this mean?-- - Dave W3DJS

It executes immediately and completes in 2 seconds. Send it to: NW Digital Radio RMA<order #> 150 Cessna Ave Roche Harbor WA 98250 Thanks, Bryan K7UDR

How long should it take to run the python script? I ran the script, then inserted the dongle and nothing happened after 1 minute: On Tue, Apr 28, 2020 at 3:42 PM Bryan Hoyer <bhhoyer@...> wrote: -- -

By it, I mean the ThumbDV. It’s never happened before, but I have to account for the possibility. All ThumbDVs are 100% Tested with the python script I posted, running on a Pi. It’s a more