@Mark. I have set up RTS flow control. I am not sure if you are talking about something different. I always operate 8N1 for both the 230400 and 480600 and only the slower works. @Bob. The thumbDV is

Something I ran into with my DV Stick (similar to the ThumbDV) was to operate my COM port with hardware flow control. I operate at 460800 and 8N1. Hardware flow control solved some of my weird dropout

What version of the ThumbDV do you have? Early units used 230.4kbps as default. While the FT230X can go up to 1Mbps, I'm not sure if those early units could handle rates above 230.4kbps. Just checking

I am not aware of anyone using the library to communicate with the chip. I use standard tty IO with Buster and it works fine at 430800. I’ve also worked with the chip on Linux while doing some

Hello, I am trying to use the FTD2xx.h library to communicate via serial port with the new ThumbDV at the higher baud rate. However, I am having a lot of issues. Almost no audio packets are going

True as long as YSF is in half rate mode.

YSFN to DMR does not need AMBE transcoding. Take a look at MMDVM_Bridge or HBlink3 projects. Steve KC1AWV

Thanks to all ambe server is up and running

Note: You may need to create the opendv user, if it doesn't exist sudo useradd opendv sudo usermod -G dialout opendv Systemd Management of AMBEserver A set of files for systemd management are

screen utility is good.. also there is byobu for linux command line. byobu is a great screen multiplexer that works on the console. I like it because you can have terminal windows side by side like

You can also install the screen utility. https://linuxize.com/post/how-to-use-linux-screen/ I use it for many linux programs. Thanks, Mike (N0VZC)

make sure to type "&" after the command you want to run. This makes it run in the background. So you would need to type "AMBEServer &" in the terminal without the quotes to make it run after you close

when i close terminal ambe server quits working any ideas

I wonder if anyone has tried a Y-cable so you can charge and plug in the Thumb DV at the same time. Mike WM4B

Le 27/04/2019 à 03:03, Mike Besemer a écrit : Hello, audio depend on the quality of your phone. For me, fine like you can heard on

I tried using it plugged into my phone, but the battery drain was prohibitive. So I installed AMBEServer on a raspberry pi, punched a hole in my firewall, and set up a dynamic DNS for it. BlueDV AMBE

I use it with an OTG adaptor to my LGV10, works like a dream.... As expected, it's a bit taxing On the battery of the phone. 73 de W4CHF Brent

Thanks Robert. Exactly what I needed to hear. 73, Mike WM4B

I use a Galaxy Note 9 with a ThumbDV plugged into it directly with an OTG cable. I run BlueDV AMBE app. he combination works perfectly. I have access to DStar, DMR, and DM+ talkgroups, no C4FM at this

Would like to hear from users who are using a Thumb DV with their Android phone. I’m very interested in this combination, but due to the fact that I’ve already got too many irons in the fire,