Hi Scott, I tried 460800 for the baud rate but no luck :-(

Try 460800 for the baud rate.

Hi John, You are great and thank you very much for your answers about my DVSI USB-3000. I can give you a SSH access to my RPI for your tests if you have time for further tests.

Is that the right baud rate for the USB-3000? (I don't own one, and there has been no testing in of the USB-3000 with ThumbTest.exe) -- John D. Hays Edmonds, WA K7VE

Hi, I tested my DVSI USB-3000 with Thumbtest.exe program. Weird response. Any clue?

I have now confirmed that it does indeed work. Two changes need to be made. First the Product Description needs to be reflashed to read any of the following “ThumbDV" or "DVstick-30" or

Hello all, Still having issues with getting my PiDV up and running. Have moved to a Pi 3B+ and now have AMBEserver and ircddbgateway installed and running. I am using /dev/ttyS0 for the PiDV.

Hi Dennis, Did you try running it in the foreground as John suggested? sudo AMBEserver -i /dev/ttyUSB0 -s 460800 -d Lito

Hello guys, my ambeserver is working now for about 3 days 24/7. Just noticed that it hang twice so I need to reboot it. Any idea why? Or any log to check Thanks Dennis

Hi John, I changed the baud rate to 230400. Previous error gone pi@compass:~ $ sudo AMBEserver -i /dev/ttyUSB0 -s 230400 -d AMBEserver: Starting... AMBEserver: Opened serial port

Hi John, Thank you very much for your support. Yes. USB-3000 is located at USB0 pi@compass:~ $ ls /dev/ttyU* /dev/ttyUSB0 pi@compass:~ $ and the result after sudo

This assumes that /dev/ttyUSB0 is your DVSI USB-3000, if not, change accordingly. -- John D. Hays Edmonds, WA K7VE

Try running it without using systemd first. sudo AMBEserver -i /dev/ttyUSB0 -s 460800 -d Change the baudrate (-s) if it is not 460800 for your device. There are also python test scripts you use to

Hi, I installed AMBEserver on RPI 3B+. Distro is Compass Linux and DVSI USB3000 is at USB0 â ambeserver@... - DV3000 Daemon Loaded: loaded

Hi K7VE, Thank you very much for your answer. I have one USB-3000 stick. I'll test it on my RaspberryPi. I'll share the results. I read that compass linux is the preferred dist. for

I have not tested the DVSI USB-3000 stick, they're pretty expensive and I haven't purchased one but I can say that we have used the ThumbDV in applications designed for the DVSI stick and it should

I did: $ sudo nano /boot/config.txt init_uart_clock=3686400 $ sudo nano /etc/inittab T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100 with:(or delete the line entirely)

Hi, I think this can be a wrong group but I could not find any group for my question. Can a DVSI's USB-3000 stick work with AMBEserver? Is the DVSI's USB-3000 stick is compatible with AMBEserver

Your DV3K is not being seen by the operating system, I had to edit a startup file on the pi for it to work. Had the same problem.

Well, that’s what I thought, but considering that exactly zero things have worked correctly since I started this project, I thought I’d confirm. So: pi@compass:/usr/sbin $ sudo ./AMBEserver