People have been asking for the this. If you like to post it. 73 Flavio VE2ZFP Ubuntu Studio Linux is my operating system of choice "Religion is an insult to human dignity. With or without it,

This is part of the reason on the DRAWS™ board we provide a 12VDC buck converter to power the Pi without lead loss. -- John D. Hays Edmonds, WA K7VE

I would second that comment about power supplies. Nearly every problem (rare) I've ever had with my many Pi computers can be boiled down to weak power supply or the USB cable that feeds power... Keep

The XLX folks do not recommend the Raspberry Pi for ambed. As far as Raspberry Pi in general, many of these issues are power supply related, both voltage (there is a drop through many leads and

Santu, As another data point, I've had AMBEServer running on a Raspberry Pi 2 for months at a time without any issues. I typically only have a single instance of Buster (Mac client) connected and it

Hi all, I'm running twi different setups : - ambed with two ThumbDVs on a Raspberry Pi 2 (for XLX) - AMBEserver with one ThumbDV on another Raspberry Pi 2 (for DVSwitch

dont forget to pull up windows device manager, find the thumbdrive under ports, then right click and update driver. this was a "gotcha" that happened to me. the win10 box recognized the thumbDV but it

Tom VE3NY

Blue DV does not support tx on FUSION, is that suggested sw that will support all of the modes? 73 Dr W4CHF

https://www.youtube.com/watch?v=R48t3S9rNN8&feature=youtu.be&t=931 -- John D. Hays Edmonds, WA K7VE

Not really. If you wanted to monitor debug output for activity you can use the -x flag to the ambeserver. AMBEserver is really a stateless daemon, it doesn't track who/what is sending it traffic and

Good Question! I would like to know too. On top of Tom's question, does it create a log file ? If so, where?

Is there a terminal command to monitor traffic on the RPi/COMPASS AMBEserver? My server is accessible by a few friends and I’d like to know when the server is being used. Tnx .... Tom VE3NY

Hi John, thanks for your quick reply. With your first question you are hitting the spot: it's a 3rd party AMBE. And last night in our 80m daily qso party somebody told me about the difference

Hi Charly, Is this a ThumbDV™ or a 3rd party AMBE 3000 device? They all function similarly, but NW Digital Radio manufactures and supports the ThumbDV™ exclusively. It sounds like your AMBE is

Hello, I'm new on DStar and I try to get an AMBE 3000 stick working on my new Win10 ACER Laptop. My problem is: on the ACER I can't hear any thing in the speaker or my Sennheiser headset. The headset

So, after reboot. I tried to run ambeserver with systemctl. I enabled and then started Here is the output. sudo systemctl status ambeserver@... ● ambeserver@... - DV3000 Daemon Loaded:

John, That article helped and lot! I think that should be in the wiki. I did sudo systemctl disable hciuart and added pi3-disable-bt to the config.txt and rebooted. Here is the ambetest2

The RPi 3 can muck with device names. See https://www.raspberrypi.org/documentation/configuration/uart.md Try /dev/ttyS0

Good Morning! I have a RPi3 and PIDV and cannot get it to work with AMBEtest , AMBEsocket or AMBEserver. I have tried the guide on the ambe groups.io wiki and installed compass. I could never get