Date   

Re: BlueDV Windows not logging DMR #bluedv

Gwen Patton
 

I strongly suggest contacting David about this, as NW Digital Radio has nothing to do with creation or support of that software. I *think* Brandmeister has made some changes in how you log into their masters very recently.

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, Dec 26, 2020 at 1:58 PM Dionisis “Dennis” Drakopoulos <sv1cdn@...> wrote:
Greetings to all and best wishes!
My BlueDV version 1.0.0.9595 for Windows 10 Home stopped logging to any DMR Master servers!
Anybody else with same issue? Any DMR MASTER node to check connection?

Thank you!
73 de SV1CDN, DENNIS!


BlueDV Windows not logging DMR #bluedv

Dionisis “Dennis” Drakopoulos
 

Greetings to all and best wishes!
My BlueDV version 1.0.0.9595 for Windows 10 Home stopped logging to any DMR Master servers!
Anybody else with same issue? Any DMR MASTER node to check connection?

Thank you!
73 de SV1CDN, DENNIS!


Re: Blue DV for windows error message , and not able to DMR..

ham73ch
 

I am connected but I don^t see any traffic/callisign at the last heard list....


Re: Blue DV for windows error message , and not able to DMR..

ham73ch
 

Goood - TNX - YESss - finally working - also v.1.0.0.9595 but how to <<enable DMR Simple mode>>  ??


Re: Blue DV for windows error message , and not able to DMR..

Gwen Patton
 

Set a default Fusion server and room. If you don't, loading the setup will give that crash result, even if you don't use Fusion.

73,
Gwen, NG3P

On Thu, Dec 24, 2020, 2:23 PM John D Hays - K7VE <john@...> wrote:
If you are using the Windows version of AMBEserver, contact info@...

On Thu, Dec 24, 2020, 08:34 ham73ch <ham73@...> wrote:
I have a SAME problem and similar message on two  "fresh/clean"  WIN 10 64bit noteboks .NET framework 4.8 updated.... trying the latest version 9570 or the previos one 9569..installing with ADMIN priviledges... similar error message...
When running ThumbTest at 460K8 is giving me 3 lines report return 3 lines, each starting with 'a' ...
PLS help 


Re: Blue DV for windows error message , and not able to DMR..

 

If you are using the Windows version of AMBEserver, contact info@...


On Thu, Dec 24, 2020, 08:34 ham73ch <ham73@...> wrote:
I have a SAME problem and similar message on two  "fresh/clean"  WIN 10 64bit noteboks .NET framework 4.8 updated.... trying the latest version 9570 or the previos one 9569..installing with ADMIN priviledges... similar error message...
When running ThumbTest at 460K8 is giving me 3 lines report return 3 lines, each starting with 'a' ...
PLS help 


Re: Blue DV for windows error message , and not able to DMR..

ham73ch
 

I have a SAME problem and similar message on two  "fresh/clean"  WIN 10 64bit noteboks .NET framework 4.8 updated.... trying the latest version 9570 or the previos one 9569..installing with ADMIN priviledges... similar error message...
When running ThumbTest at 460K8 is giving me 3 lines report return 3 lines, each starting with 'a' ...
PLS help 


Re: Blue DV for windows error message , and not able to DMR..

David Drake
 

What version of BlueDV are you running? I had the first issue you described and solved it by uninstalling and installing version 1.0.0.9595. I cannot speak towards the second issue.

73-n3lsb Dave. 

On Thu, Dec 17, 2020, 11:26 AM S. Wilk <nk9a@...> wrote:
 The error message  I get on screen when I try  to get set -up is " Unhandled exception has occurred in your application   goes on to say goes on to say object reference not set to an instance of an object .  Second issue , although I can easily get to and talk on D-Star.. trying to set up for  the 847 group on DMR  is impossible .  TGIF , same thing .. I believe that passw0rd should be  changed to pass1rd  but that change  can not be set ( see the above error message ) and although I save the changes , next visit to set-up shows  DMRtype = DMR plus.. brandmeister =2001 EU., passw0rd .,dmr master = ipsc2illinois ..  I can not understand any of it .. can someone explain? thank you . 


Re: what does this error message mean?

S. Wilk
 

 Wow Gwen .. that worked . I put something into the fusion screen ( unimportant) and the whole thing was " saved" when I returned to check .  No error message either .. happy holidays . 


Blue DV for windows error message , and not able to DMR..

S. Wilk
 

 The error message  I get on screen when I try  to get set -up is " Unhandled exception has occurred in your application   goes on to say goes on to say object reference not set to an instance of an object .  Second issue , although I can easily get to and talk on D-Star.. trying to set up for  the 847 group on DMR  is impossible .  TGIF , same thing .. I believe that passw0rd should be  changed to pass1rd  but that change  can not be set ( see the above error message ) and although I save the changes , next visit to set-up shows  DMRtype = DMR plus.. brandmeister =2001 EU., passw0rd .,dmr master = ipsc2illinois ..  I can not understand any of it .. can someone explain? thank you . 


Re: Soundcard Problem

John Swisher
 

Hit the nail on the head perfect! I knew it had to be something simple! Thank you so much!


Re: Soundcard Problem

Patrick Perdue
 

Possibly silly question:

Is Windows 10 blocking access to your microphone? Check in microphone privacy settings. Make sure the "allow apps to access your microphone" checkbox is checked.

Might not be your problem, but worth a look.


On 12/13/2020 7:01 AM, ab4o.tn@... wrote:
I have a Dell Latitude 5480 i7/win 10. Everything is working except when I go to transmit. A soundcard error pops up and it won’t transmit. Then onboard sound is Realtek. Any help would greatly be appreciated.
John AB4O 


Soundcard Problem

John Swisher
 

I have a Dell Latitude 5480 i7/win 10. Everything is working except when I go to transmit. A soundcard error pops up and it won’t transmit. Then onboard sound is Realtek. Any help would greatly be appreciated.
John AB4O 


Re: Promblems with Dv33 Stick from GUUs and Baud 921600 on Linux.

 

Hi Sven,

The dv33 is not a product of NW Digital Radio, so please contact the manufacturer for support.

The invocation of ambeserver@ThumbDV  is exclusive to the ThumbDV™ you must discover what port your AMBE device
 is using (eg ttyUSB0) and modify your startup accordingly.  

From the README

Using the included service file, the operating parameters are taken from configuration files located in /etc/opendv. You may edit these files to use a different network port and device file. If you need to create a new configuration, simply copy a configuration file and name it with ambeserver-devicename.conf where devicename is the device file in /dev such as

sudo cp /etc/opendv/ambeserver-ttyUSB0.conf /etc/opendv/ambeserver-ttyUSB1.conf

A special device is created by udev for the ThumbDV™ by the file 99-thumbdv.rules as part of this install. When a ThumbDV™ is plugged into a USB port, this rule causes udevd to detect it and create a link between /dev/ThumbDV and the enumerated USB port, e.g. /dev/ttyUSB0. If the ThumbDV™ lands on a different USB port such as /dev/ttyUSB2, the link moves to that port.

If for example, the device is at /dev/ttyUSB0 and you have modified /etc/opendv/ambeserver-ttyUSB0.conf 
to account for the baud rate.  Then

sudo systemctl disable ambeserver@ThumbDV
sudo systemctl stop ambeserver@ThumbDV
sudo systemctl enable ambeserver@ttyUSB0
sudo systemctl start ambeserver@ttyUSB
sudo systemctl status ambeserver@ttyUSB0



On Fri, Dec 4, 2020 at 1:06 PM <svenjaensch@...> wrote:
Having big trouble here.
We will change the DV3000 devices to an dv33 stick.
We are running an ambe server from git and make correct install but the stick with newest drivers and implementation was found but ambed dont started.
I know that the stick will run with the complete install from lucs xlx server but we have an xlx server on running on a server im web and currently the dv sticks local and ip and portbinding between ambeserver and xlx-master.
I think the ambe dont support newer dv33 sticks or the baudrate. Any Ideas to run the dv33 stick under ambe server local here.

Under Win the stick runs fine with bluedv for win and dv33 in bluedv and 921600bd in software and in system config for the stick in hardwaremananger.

thanks in advance
regards Sven DO5SPA



--
John D. Hays
Kingston, WA
K7VE

 


Promblems with Dv33 Stick from GUUs and Baud 921600 on Linux.

svenjaensch@...
 

Having big trouble here.
We will change the DV3000 devices to an dv33 stick.
We are running an ambe server from git and make correct install but the stick with newest drivers and implementation was found but ambed dont started.
I know that the stick will run with the complete install from lucs xlx server but we have an xlx server on running on a server im web and currently the dv sticks local and ip and portbinding between ambeserver and xlx-master.
I think the ambe dont support newer dv33 sticks or the baudrate. Any Ideas to run the dv33 stick under ambe server local here.

Under Win the stick runs fine with bluedv for win and dv33 in bluedv and 921600bd in software and in system config for the stick in hardwaremananger.

thanks in advance
regards Sven DO5SPA


Re: temalin48@gmail.com wants you to join them on Mint & save a fox ton on wireless

alpha foxtrotsix
 

What is the expected shipping date for the backordered ThumbDV? I ordered one as a gift for a fellow ham.

73 de AF6BY

Jeff
.- ..-. -.... -... -.--




temalin48@gmail.com wants you to join them on Mint & save a fox ton on wireless

Wa4kfz
 

Advertising? Hacked newsgroup??

73,
Mark WA4KFZ 


Begin forwarded message:

From: Terry Malin <Temalin48@...>
Date: November 1, 2020 at 3:58:39 PM EST
To: ambe@nw-digital-radio.groups.io
Subject: [ambe] temalin48@... wants you to join them on Mint & save a fox ton on wireless
Reply-To: ambe@nw-digital-radio.groups.io


Switching to Mint is a win-win. Your friend wants you to try Mint Mobile.
 
Mint Mobile
 
 

Terry Malin is on Mint Mobile saving a ton on their wireless bill, and wants you to join them.

The really great part is, if you sign up using their unique link, you get $15 applied to your account, and your friend will also earn renewal credit. 

Our plans start at just $15 bucks a month, and include unlimited talk and text, plus high speed data.

Need more convincing? Here's a note from Terry Malin:

"Join me on Mint where I am saving a fox ton on wireless. Plans start at just $15 bucks, and include high speed data, plus unlimited talk and text. Use my unique link and you'll get $15 added to your Mint account, and I'll get free Mint too. Win-win"

Virtual high five,

Mint Fox
 
All our plans come with
No referral needed to follow us
 

NEED A HELPING PAW?

+1.800.683.7392 | mintmobile.com/help

17870 Newhope Street #104-155, Fountain Valley, CA 92708
© 2020 Mint Mobile. All Rights Reserved


Oh you're still reading? Here's the legal stuff ... Referral credits limited to 10 referrals. Must have an active Mint account. Friend credits awarded for new customers only. May not be combined with other offers. Terms subject to change. See full rules at www.mintmobile.com/referral-terms/

Unsubscribe

Powered by: friendbuy

 
 
Facebook Instagram Twitter YouTube


temalin48@gmail.com wants you to join them on Mint & save a fox ton on wireless

Terry Malin
 

Switching to Mint is a win-win. Your friend wants you to try Mint Mobile.
 
Mint Mobile
 
 

Terry Malin is on Mint Mobile saving a ton on their wireless bill, and wants you to join them.

The really great part is, if you sign up using their unique link, you get $15 applied to your account, and your friend will also earn renewal credit. 

Our plans start at just $15 bucks a month, and include unlimited talk and text, plus high speed data.

Need more convincing? Here's a note from Terry Malin:

"Join me on Mint where I am saving a fox ton on wireless. Plans start at just $15 bucks, and include high speed data, plus unlimited talk and text. Use my unique link and you'll get $15 added to your Mint account, and I'll get free Mint too. Win-win"

Virtual high five,

Mint Fox
 
All our plans come with
No referral needed to follow us
 

NEED A HELPING PAW?

+1.800.683.7392 | mintmobile.com/help

17870 Newhope Street #104-155, Fountain Valley, CA 92708
© 2020 Mint Mobile. All Rights Reserved


Oh you're still reading? Here's the legal stuff ... Referral credits limited to 10 referrals. Must have an active Mint account. Friend credits awarded for new customers only. May not be combined with other offers. Terms subject to change. See full rules at www.mintmobile.com/referral-terms/

Unsubscribe

Powered by: friendbuy

 
 
Facebook Instagram Twitter YouTube


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

 

Gary,
Yes, I would as the task to change the band rate is quite intensive.
They are identical except for the band rate.
I will await your research.
Please let me know.
Thanks
73
Don
WB5EKU



On October 10, 2020, at 8:18 AM, Gary D Walborn <gwalborn@...> wrote:


Would you be interested in swapping your low speed unit for my high speed unit?

Gary
WB8LEA

On Fri, Oct 9, 2020, 8:18 PM Donald Jacob <wb5eku@...> wrote:
Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU


Re: Thumb DV Baud rate change #ambe #ambeserver #thumbdv

Gary D Walborn
 

Let me do a little research and get back to you.


On Sat, Oct 10, 2020, 11:22 AM John D Hays - K7VE <john@...> wrote:
That would be an excellent solution, should you decide to do so.

On Sat, Oct 10, 2020, 08:18 Gary D Walborn <gwalborn@...> wrote:
Would you be interested in swapping your low speed unit for my high speed unit?

Gary
WB8LEA

On Fri, Oct 9, 2020, 8:18 PM Donald Jacob <wb5eku@...> wrote:
Sorry if this has been answered before, I searched but could not find it.
I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a
hardware (relative easy!) mod to bring the original up to 460800 ?
Thanks
Don
WB5EKU

41 - 60 of 1504