Date   

Re: DMR XLX Fusion Linking #thumbdv

John
 

That was my understanding but I'm looking to bridge the Dstar to the DMR/Fusion side. I'm just having a hard time finding information on software and configuration to use with the ThumbDVs.


Re: DMR XLX Fusion Linking #thumbdv

 

DMR and Fusion HR use the same AMBE vocoder mode, so the reflector only needs to handle the digital wrappers and network transit. 


On Thu, Jan 7, 2021, 10:40 Brett <zl2aus@...> wrote:

The latest version XLXd is a DMR / Fusion system and doesn't need any trans-coding .. trans-coding is needed for Dstar connections .. my XLX has trans-coding but I can listen to DMR transmissions on my fusion radio connected to my XLX reflector .. I may be wrong but it works for me ...

Regards
Brett ZL2AUS


At 07:01 am 8/01/2021, you wrote:
I'm try to find information on setting up transcoding between an XLX reflector, DMR and fusion. It is my understanding that DMR and fusion will be setup on the same remote server remotely . I also understand that the DMR/Fusion systems need transcoding to talk with the XLX reflector. 2 thumbDV modules are on the way. Can somebody point me in a direction to setting up the transcoding on a raspberry pi locally?  What software is required? Are there any good links with instructions?

Thanks,
John


Re: DMR XLX Fusion Linking #thumbdv

Brett
 


The latest version XLXd is a DMR / Fusion system and doesn't need any trans-coding .. trans-coding is needed for Dstar connections .. my XLX has trans-coding but I can listen to DMR transmissions on my fusion radio connected to my XLX reflector .. I may be wrong but it works for me ...

Regards
Brett ZL2AUS


At 07:01 am 8/01/2021, you wrote:
I'm try to find information on setting up transcoding between an XLX reflector, DMR and fusion. It is my understanding that DMR and fusion will be setup on the same remote server remotely . I also understand that the DMR/Fusion systems need transcoding to talk with the XLX reflector. 2 thumbDV modules are on the way. Can somebody point me in a direction to setting up the transcoding on a raspberry pi locally?  What software is required? Are there any good links with instructions?

Thanks,
John


Re: DMR XLX Fusion Linking #thumbdv

Kenny Richards
 

Please include the pointers here, I'm also curious in setting something similar up.

73,
Kenny


DMR XLX Fusion Linking #thumbdv

John
 

I'm try to find information on setting up transcoding between an XLX reflector, DMR and fusion. It is my understanding that DMR and fusion will be setup on the same remote server remotely . I also understand that the DMR/Fusion systems need transcoding to talk with the XLX reflector. 2 thumbDV modules are on the way. Can somebody point me in a direction to setting up the transcoding on a raspberry pi locally?  What software is required? Are there any good links with instructions? 

Thanks,
John


Re: BlueDV Windows not logging DMR #bluedv

Dionisis “Dennis” Drakopoulos
 

Thanks everybody!
Root cause found. SYSOP of GR 2021 Master Node helped me teoublehoot. Root cause was the setting of FREQUENCY field in BlueDV setup. Being a non true RF Hotspot I was using all zero frequency, worked since summer but not any more. Now I have to input a mockup frequency for BM to accept my login!
Of course you do have to setup in BM the Hotspot Security and use this password as DMR Master node password.

73 es HNY to all!


Re: BlueDV Windows not logging DMR #bluedv

Gwen Patton
 

Dennis, did you actually go to the Brandmeister site, create an account for yourself, and set the password? You do that in the Self-Care section of the site. If you only put some random password in BlueDV, it's not going to work. You have to be matching a password you created for yourself on Brandmeister.

-=-=-=-=-=-=-=-=-
73,Gwen, NG3P


On Sun, Dec 27, 2020 at 7:05 AM Dionisis “Dennis” Drakopoulos <sv1cdn@...> wrote:
Unfortunatelly, 12h after and still not able to login. Emailed David ABT this issue.

73 es HNY all! Stay safe!
Dennis.


Re: BlueDV Windows not logging DMR #bluedv

Dionisis “Dennis” Drakopoulos
 

Unfortunatelly, 12h after and still not able to login. Emailed David ABT this issue.

73 es HNY all! Stay safe!
Dennis.


Re: ThumbDV & BlueDV

Dave Hayes VE3JX
 

Fixed! The PC was assigning COM3. I changed it in Device Manager to COM4, and it seems to work.

There must be something to do with COM3 that prevents it being assigned to this.

Thanks to all.

Dave.

On 2020-12-26 8:53 p.m., Dave Hayes via groups.io wrote:
Greetings all,

I've had the above combination working for some time now on Win 10; both on my desktop and my laptop. My desktop was running 32 bit win 10, and my laptop was on 64 bit win 10.

I have just changed my desktop over to 64 bit win 10. I have reinstalled BlueDV, but I cannot get my ThumbDV to work with it.

It appears to not recognize the Com port; i.e. I see the Com port added when I plug in the ThumbDV but BlueDV cannot open the Com port.

I have the same setup on both PCs. The ThumbDV and BlueDV see each other on the laptop, but not the Desktop. The only difference is the date on the FTDI driver. It is 8/26/2014 (version 2.12.0.0) on the laptop, and 2017-08-16 (version 2.12.28.0) on the desktop.

Is there something I am overlooking?

Dave Hayes - VE3JX





thumbtest results

Dave Hayes VE3JX
 

I tried the ThumbTest. The results are below:

9

0AMBE3000R

1 1V120.E100.XXXX.C106.G514.R009.B0010411.C0020208

I'm guessing that, since it came back with "AMBE300R" that the computer is seeing the ThumbDV. That means that there is something between BlueDV and the COM port?

Dave.


ThumbDV & BlueDV

Dave Hayes VE3JX
 

Greetings all,

I've had the above combination working for some time now on Win 10; both on my desktop and my laptop. My desktop was running 32 bit win 10, and my laptop was on 64 bit win 10.

I have just changed my desktop over to 64 bit win 10. I have reinstalled BlueDV, but I cannot get my ThumbDV to work with it.

It appears to not recognize the Com port; i.e. I see the Com port added when I plug in the ThumbDV but BlueDV cannot open the Com port.

I have the same setup on both PCs. The ThumbDV and BlueDV see each other on the laptop, but not the Desktop. The only difference is the date on the FTDI driver. It is 8/26/2014 (version 2.12.0.0) on the laptop, and 2017-08-16 (version 2.12.28.0) on the desktop.

Is there something I am overlooking?

Dave Hayes - VE3JX


Re: BlueDV Windows not logging DMR #bluedv

Dionisis “Dennis” Drakopoulos
 

Thank you both!
I found the following and acted accordingly, yet still can't connect - even to USA Masters. Will give it some time in case this password change takes a while to propagate.
https://news.brandmeister.network/hotspot-security-password-now-required-for-connections-to-us-masters/

73!


Re: BlueDV Windows not logging DMR #bluedv

Wayne Lewis
 

SV1CDN, Dennis. In your BlueDV , change the BM password to your own BM password. It happen to me also. KB3WCV, Wayne


Re: BlueDV Windows not logging DMR #bluedv

Gwen Patton
 

I strongly suggest contacting David about this, as NW Digital Radio has nothing to do with creation or support of that software. I *think* Brandmeister has made some changes in how you log into their masters very recently.

-=-=-=-=-=-=-=-=-
73,
Gwen, NG3P


On Sat, Dec 26, 2020 at 1:58 PM Dionisis “Dennis” Drakopoulos <sv1cdn@...> wrote:
Greetings to all and best wishes!
My BlueDV version 1.0.0.9595 for Windows 10 Home stopped logging to any DMR Master servers!
Anybody else with same issue? Any DMR MASTER node to check connection?

Thank you!
73 de SV1CDN, DENNIS!


BlueDV Windows not logging DMR #bluedv

Dionisis “Dennis” Drakopoulos
 

Greetings to all and best wishes!
My BlueDV version 1.0.0.9595 for Windows 10 Home stopped logging to any DMR Master servers!
Anybody else with same issue? Any DMR MASTER node to check connection?

Thank you!
73 de SV1CDN, DENNIS!


Re: Blue DV for windows error message , and not able to DMR..

ham73ch
 

I am connected but I don^t see any traffic/callisign at the last heard list....


Re: Blue DV for windows error message , and not able to DMR..

ham73ch
 

Goood - TNX - YESss - finally working - also v.1.0.0.9595 but how to <<enable DMR Simple mode>>  ??


Re: Blue DV for windows error message , and not able to DMR..

Gwen Patton
 

Set a default Fusion server and room. If you don't, loading the setup will give that crash result, even if you don't use Fusion.

73,
Gwen, NG3P

On Thu, Dec 24, 2020, 2:23 PM John D Hays - K7VE <john@...> wrote:
If you are using the Windows version of AMBEserver, contact info@...

On Thu, Dec 24, 2020, 08:34 ham73ch <ham73@...> wrote:
I have a SAME problem and similar message on two  "fresh/clean"  WIN 10 64bit noteboks .NET framework 4.8 updated.... trying the latest version 9570 or the previos one 9569..installing with ADMIN priviledges... similar error message...
When running ThumbTest at 460K8 is giving me 3 lines report return 3 lines, each starting with 'a' ...
PLS help 


Re: Blue DV for windows error message , and not able to DMR..

 

If you are using the Windows version of AMBEserver, contact info@...


On Thu, Dec 24, 2020, 08:34 ham73ch <ham73@...> wrote:
I have a SAME problem and similar message on two  "fresh/clean"  WIN 10 64bit noteboks .NET framework 4.8 updated.... trying the latest version 9570 or the previos one 9569..installing with ADMIN priviledges... similar error message...
When running ThumbTest at 460K8 is giving me 3 lines report return 3 lines, each starting with 'a' ...
PLS help 


Re: Blue DV for windows error message , and not able to DMR..

ham73ch
 

I have a SAME problem and similar message on two  "fresh/clean"  WIN 10 64bit noteboks .NET framework 4.8 updated.... trying the latest version 9570 or the previos one 9569..installing with ADMIN priviledges... similar error message...
When running ThumbTest at 460K8 is giving me 3 lines report return 3 lines, each starting with 'a' ...
PLS help 

161 - 180 of 1637