The Wiki is updated.

#ambeserver #install #linux #thumbdv

A new AMBEserver install process is available at https://github.com/nwdigitalradio/ambeserver-install

#ambeserver #install #linux #thumbdv

Have a look at this discussion......... https://nw-digital-radio.groups.io/g/ambe/topic/high_loss_with_thumbdv_on/8874299?p=Created,,,20,2,0,0&jump=1

#thumbdv

Your internet connection or wifi. Get Outlook for Android

#thumbdv

I have a new thumbdv that seems to be working well with Bluedv. On DSTAR, no issues. On DMR, however, when I view my transmission on a pi-star dashboard, I show between 10% and 30% loss. What adjustme

#thumbdv

Hi Steve, Check out BlueDV: http://www.pa7lim.nl/bluedv-windows/ Here’s a tutorial: https://youtu.be/291k3VxJCv0 Bryan K7UDR

#thumbdv

I suggest you start here: http://www.pa7lim.nl/bluedv/ -=-=-=-=-=-=-=-=- 73, Gwen, NG3P

#thumbdv

I would disagree -- because I have a device almost identical to the ThumbDV -- it is a DV3K AMBE USB dongle, and it works in the same dock just fine. I'm aware both the ThumbDV and DV3K USB dongles ha

#thumbdv

Maybe the dock isn't properly powering the ThumbDV? I have my ThumbDV on a RasPi III with a powered hub attached. It absolutely will not work on an unpowered hub, or one that has too little power. The

#thumbdv

I assume the ThumbDV is using an FTDI device for the USB to Serial conversion. I’ve noticed similar issues when not plugged directly into the PC. This is compared to a Powered Hub. I’m starting to be

#thumbdv

Bryan, I also have a Thumb DV which I purchased last November. I’ve tried to run it on a variety of pc’s with Windows 10 & 7 with no success, it never shows up in device manager and no led’s ever ligh

#thumbdv

HAH! That was it! Connecting the ThumbDV directly to the laptop's embedded USB port works. Connecting it to a Dell laptop dock (powered) does not. Of course, that's terribly frustrating. The point of

#thumbdv

Dave, I’m baffled. It looks fine. We only change a few values, as you can see in the script, and the manufacturing date is entered by hand and it is correct as well. Are you direct connected to the ma

#thumbdv

Here's the dump: dave@Moonquake:~/projects/hamradio/NorthwestDigitalRadio/ftx-prog$ ./ftx_prog --dump ftx_prog: version 0.3 Modified for the FT-X series by Richard Meadows Based upon: ft232r_prog: ver

#thumbdv

OK, in that case follow the instructions for fix_prog and run sudo ./ftx_prog —dump

#thumbdv

So there's nothing I can do to program it here? I am a software developer and used to build Palm Treo smartphones 10 years ago... Willing to sign a NDA...

#thumbdv

Send it back anyways. The port detect depends on the EEPROM being programmed correctly.

#thumbdv

It means the ThumbDV is good. Did both Green/Red LEDs flash?

#thumbdv

The autodetect isn't working, but I found a port specification in your script, so here are those results: What does this mean?

#thumbdv

It executes immediately and completes in 2 seconds. Send it to: NW Digital Radio RMA<order #> 150 Cessna Ave Roche Harbor WA 98250 Thanks, Bryan K7UDR

#thumbdv