Correct. Thanks.

#ambe #bluedv

So it sounds like you are good now.

#ambe #bluedv

Boom as in it's not connecting to the software. The FTDI drivers were apparently outdated. Updated the driver and it connected .

#ambe #bluedv

And Boom? So is it connecting or not? Device Manager should tell you a com port ID.

#ambe #bluedv

I wasn't able to connect the Thumbdv to the software. Even though it was showing up in device manager as a USB serial port. Device manager told me in events that the device wasn't through installing.

#ambe #bluedv

Hi - Has anyone tried to use a ThumbDV with its AMBE firmware to feed digital data to a radio's TNC input or to modulate a radio's audio? I have an IC-7000, which has a 9600 data input and, like many,

#thumbdv #ambe

Does the sound card bug cause problems if I'm running AMBEserver on one Linux machine (a Raspberry pi) but access it from another Linux machine (say a Chromebook running GalliumOS linux) from another

#ambe #thumbdv #bluedv

Thanks Guys. This is good to know. I have been trying for hours to get the Linux system to work with BlueDV and the ThumbDV with ambe. I'll ty my Android N-60 next. The ThumbDV with BlueDV works great

#ambe #thumbdv #bluedv

Hi All...Yesterday everything was working ok, today windows says the application BlueDV has a virus...seen this already but dont know where...Please advice..73 de sv2evs

#ambe #bluedv #support

Ooh aha! Thank you David! Cheers and 73, Bill

#ambe #thumbdv #bluedv

Hi bill, This is not going to work. The ambe feature only works on windows. This because mono has issues with the sound card under Linux.

#ambe #thumbdv #bluedv

Greetings All, I installed BlueDV for Linux (under parallels for mac). mono is installed a-ok, linux appears to "see" the thumbdv. I'm not sure why BlueDV won't allow me to tick the thumb-dv checkbox?

#ambe #thumbdv #bluedv

Thanks guys.....Your feedback and responses were awesome!! Mission accomplished!!!....73 Dev, 9Y4DG

#udpport #ambe #port

A standard convention in Unix/Linux is to provide a simple usage message, by using an -h or --help flag to a command. e.g. ambeserver -h will show you: Usage: AMBEserver [-d] [-r] [-s speed] [-p port]

#udpport #ambe #port

Sorry a typo /usr/local/sbin/ambeserver -d -p 24999 -i /dev/ttyUSB0 -s 460800

#udpport #ambe #port

Hi all, You can use switch "p" to change port number, exemp: usr/local/sbin/ambeserver -d -i -p 24999 /dev/ttyUSB0 -s 460800 Hope this help

#udpport #ambe #port

Hi Dev, as you remember before you compile (with make and make install) you had edit the ambeserver.c file with a editor (as root) to change in it the baudrate ( maybe you have), on one of the followi

#udpport #ambe #port

There are command line switches to set the port and device.

#udpport #ambe #port

Thank you Frank for your very prompt response.. It seems as though you might be using Compass Linux. Unfortunately, I'm using Raspian Stretch., so there is no opendv folder and neither am I seeing any

#udpport #ambe #port

Dev I’m running multiple servers also and I did the following on the PI server: pico /etc/opendv/ambeserver-ttyUSB0.conf Changed the UDP port to 18307 Did UDP port forwarding on the router for 18307.

#udpport #ambe #port