You need to open those ports on your router to get to your server from outside your local network. Jeff AF6BY

#ambeserver

Hi Nickko, The ambeserver listens on UDP 2460 (unless modified) and usually listens on all IPv4 interfaces. You can check on the host running ambeserver (assuming Linux) with: netstat -an | grep 2460

#ambeserver

Hello, I'm trying to use BlueDV Ambeserver on Android with a ThumbDV dongle on a Raspberry Pi. The server works locally, I've tried with the BlueDV application and Ser2net, it works. The problem seems

#ambeserver

BlueDV (configured to use AMBEserver) crashes when terminating AMBEserver version 2018-06-13 git #735ef7e while BlueDV 1.0.0.9612 is in the "Reconnecting..." state. Yes, I am running BlueDV inside of

#ambeserver #bluedv #linux #wine

Hi All, See my funny experiment with the ThumbDV ( with AMBEServer ) and an Android Wear watch using DSTAR. Keep in mind that this version is not available! https://www.youtube.com/watch?v=xgXqMZmDrbA

#thumbdv #ambeserver

Gary, Yes, I would as the task to change the band rate is quite intensive. They are identical except for the band rate. I will await your research. Please let me know. Thanks 73 Don WB5EKU

#ambe #ambeserver #thumbdv

Let me do a little research and get back to you.

#ambe #ambeserver #thumbdv

That would be an excellent solution, should you decide to do so.

#ambe #ambeserver #thumbdv

Would you be interested in swapping your low speed unit for my high speed unit? Gary WB8LEA

#ambe #ambeserver #thumbdv

Mike, thanks! John sent it to me and it does look quite formatible for thesej old eyes! 73 WB5EKU

#ambe #ambeserver #thumbdv

Hi John, Yes, I would like to have my original one and my newer one run at the same baud rate for a transcoder project.

#ambe #ambeserver #thumbdv

I see that John has replied. I forgot to add that the procedure is not for the faint of heart, which is why John has asked why you wish to do it. de Mike

#ambe #ambeserver #thumbdv

Hi Don. I recall reading a how-to from John Hays of NW Digital Radio, where he explains how to do "surgery" to an Original ThumbDV to change the baud rate from 230,400 to 460,800, I believe that it in

#ambe #ambeserver #thumbdv

Don, Please review http://nwdigitalradio.com/thumbdv-model-a/ Changing the baud rate is not trivial. Is there a particular reason you wish to change it?

#ambe #ambeserver #thumbdv

Sorry if this has been answered before, I searched but could not find it. I have an original ThumbDV, its baud rate is 230,400. My new ThumbDV has a baud rate of 460800, Is there a hardware (relative

#ambe #ambeserver #thumbdv

Hello everyone, I recently setup ambeserver linke to peanut and to our YSF Reflector which is alos link to our club's repeater (Yaesu DR1X). We recently encountered intermittent transmissions when TX

#ambeserver #thumbdv

Using system to status will give some general system events.

#ambeserver #install #linux #thumbdv

There is no log file.

#ambeserver #install #linux #thumbdv

Where would I find the log file? Looked in all the usual places.

#ambeserver #install #linux #thumbdv

The Wiki is updated.

#ambeserver #install #linux #thumbdv