Thanks guys.....Your feedback and responses were awesome!! Mission accomplished!!!....73 Dev, 9Y4DG

#udpport #ambe #port

A standard convention in Unix/Linux is to provide a simple usage message, by using an -h or --help flag to a command. e.g. ambeserver -h will show you: Usage: AMBEserver [-d] [-r] [-s speed] [-p port]

#udpport #ambe #port

Sorry a typo /usr/local/sbin/ambeserver -d -p 24999 -i /dev/ttyUSB0 -s 460800

#udpport #ambe #port

Hi all, You can use switch "p" to change port number, exemp: usr/local/sbin/ambeserver -d -i -p 24999 /dev/ttyUSB0 -s 460800 Hope this help

#udpport #ambe #port

Hi Dev, as you remember before you compile (with make and make install) you had edit the ambeserver.c file with a editor (as root) to change in it the baudrate ( maybe you have), on one of the followi

#udpport #ambe #port

There are command line switches to set the port and device.

#udpport #ambe #port

Thank you Frank for your very prompt response.. It seems as though you might be using Compass Linux. Unfortunately, I'm using Raspian Stretch., so there is no opendv folder and neither am I seeing any

#udpport #ambe #port

Dev I’m running multiple servers also and I did the following on the PI server: pico /etc/opendv/ambeserver-ttyUSB0.conf Changed the UDP port to 18307 Did UDP port forwarding on the router for 18307.

#udpport #ambe #port

Good day, The AMBEServer defaults to port 2460. I would like to run multiple servers simultaneously. Of course, they can't all use port 2460 concurrently. So the question is how does one change the UD

#udpport #ambe #port