Thanks Anna!

All is well, Tim had one of the last in-stock units which are going out today. Bryan K7UDR

Anna, the Author of Buster, is aware of the issue and hopes to get to it this month. I’m also a Mac/Catalina user. I moved my ThumbDV to a Pi and run Ambeserver, then Buster can access the ThumbDV ove

We do not write or support the SW, which is offered for free from dedicated Hams and supported by the community via our forums. The ThumbDV has a 30 day money back guarantee. For a refund, send it to:

Hi Steve, Check out BlueDV: http://www.pa7lim.nl/bluedv-windows/ Here’s a tutorial: https://youtu.be/291k3VxJCv0 Bryan K7UDR

#thumbdv

Dave, I’m baffled. It looks fine. We only change a few values, as you can see in the script, and the manufacturing date is entered by hand and it is correct as well. Are you direct connected to the ma

#thumbdv

OK, in that case follow the instructions for fix_prog and run sudo ./ftx_prog —dump

#thumbdv

Send it back anyways. The port detect depends on the EEPROM being programmed correctly.

#thumbdv

It means the ThumbDV is good. Did both Green/Red LEDs flash?

#thumbdv

It executes immediately and completes in 2 seconds. Send it to: NW Digital Radio RMA<order #> 150 Cessna Ave Roche Harbor WA 98250 Thanks, Bryan K7UDR

#thumbdv

By it, I mean the ThumbDV. It’s never happened before, but I have to account for the possibility. All ThumbDVs are 100% Tested with the python script I posted, running on a Pi. It’s a more comprehensi

#thumbdv

Here’s the link to the python/linux test, you don’t need ftx_prog. https://github.com/bhhoyer/ThumbDVTest/blob/master/README.md

#thumbdv

I have FTDI Driver 2.12.28.0 8/16/2017 on my BlueDV/Win10 system as well. Your ThumbDV is definitely 460k8 I will post our manufacturing test later today that runs a python script on Linux and does a

#thumbdv

Be advised there are some issues with Buster on Catalina that Anna is looking into. Bryan K7UDR

Hi Jay, The very first units did not have the FCC Sticker on the back. They are all 230k4 Baud Units ordered after July 9th 2015 are 460k8 baud There have been a number of small tweaks to the board ov

If by “it” you’re referring to the ThumbDV then yes you need the FTDI Driver. https://www.ftdichip.com/FTDrivers.htm Cheers, Bryan K7UDR

Hi Marco, A number of users have traced problems like this to an inadequate Power Supply. Make certain that you see 5V at the PI and that your connections are reliable. Thanks, Bryan K7UDR

Hi Jeff, If you purchased recently the ThumbDV has been on sale for $20 off which is cheaper than our 5% for 5 Qty discount. Was it 1 order for 5? Thanks, Bryan K7UDR

Yes, they are tested before shipping. Current product runs at 460k8 Baud. The original units ran at 230k4 so there is an app setting for baud rate. Bryan K7UDR

Hi Eric, FABs are in house the last components should arrive this week so we can move to assembly. Probably ship 1st week of May. Thanks, Bryan K7UDR