|
ambeserver-install -Has anyone run the Simple Install lately?
The DV3000/PiDV. I was planning on doing a short segment about AMBE Server on the RPi, since it's been a while since I've done anything with AMBE on Linux. I'm going to demonstrate with the ThumbDV af
The DV3000/PiDV. I was planning on doing a short segment about AMBE Server on the RPi, since it's been a while since I've done anything with AMBE on Linux. I'm going to demonstrate with the ThumbDV af
|
By
VE3MIC
· #1600
·
|
|
ambeserver-install -Has anyone run the Simple Install lately?
Almost there...(it was a bad SD card) however, I'm running into an error when I run 'sudo systemctl status ambeserver@ttyAMA0' ambeserver@... - AMBEserver Daemon Loaded: loaded (/etc/syste
Almost there...(it was a bad SD card) however, I'm running into an error when I run 'sudo systemctl status ambeserver@ttyAMA0' ambeserver@... - AMBEserver Daemon Loaded: loaded (/etc/syste
|
By
VE3MIC
· #1598
·
|
|
Thumb DV Baud rate change
#ambe
#ambeserver
#thumbdv
I see that John has replied. I forgot to add that the procedure is not for the faint of heart, which is why John has asked why you wish to do it. de Mike
I see that John has replied. I forgot to add that the procedure is not for the faint of heart, which is why John has asked why you wish to do it. de Mike
|
By
VE3MIC
· #1465
·
|
|
Thumb DV Baud rate change
#ambe
#ambeserver
#thumbdv
Hi Don. I recall reading a how-to from John Hays of NW Digital Radio, where he explains how to do "surgery" to an Original ThumbDV to change the baud rate from 230,400 to 460,800, I believe that it in
Hi Don. I recall reading a how-to from John Hays of NW Digital Radio, where he explains how to do "surgery" to an Original ThumbDV to change the baud rate from 230,400 to 460,800, I believe that it in
|
By
VE3MIC
· #1464
·
|
|
BlueDV Windows for ThumbDV
Thank you Different David :) Yes, I had discovered that, but I couldn't confirm that i was connected to the correct TG -if any at all. If you choose from the list, the TG# appears when you 'transmit'.
Thank you Different David :) Yes, I had discovered that, but I couldn't confirm that i was connected to the correct TG -if any at all. If you choose from the list, the TG# appears when you 'transmit'.
|
By
VE3MIC
· #1279
·
|
|
BlueDV Windows for ThumbDV
Hello David. Firstly, thank you for your continuing efforts on the BlueDV project, it is most appreciated. I do have a question. Could you point me to the DMR TG (Talkgroup) configuration file? I need
Hello David. Firstly, thank you for your continuing efforts on the BlueDV project, it is most appreciated. I do have a question. Could you point me to the DMR TG (Talkgroup) configuration file? I need
|
By
VE3MIC
· #1277
·
|
|
Absolute beginner Thumb-dv
Here are two solutions for you... Perform only ONE of the following options: <Option1> -Copy this HBLink.txt file and save to> C:\Users\'username'\Documents\BlueDV <-replace 'username' with your usern
Here are two solutions for you... Perform only ONE of the following options: <Option1> -Copy this HBLink.txt file and save to> C:\Users\'username'\Documents\BlueDV <-replace 'username' with your usern
|
By
VE3MIC
· #1218
·
|
|
dutch-star.eu
That project was abandoned quite a while ago. BlueDV is the only remaining one that is still under development that I know of currently 73 de Mike
That project was abandoned quite a while ago. BlueDV is the only remaining one that is still under development that I know of currently 73 de Mike
|
By
VE3MIC
· #1189
·
|
|
ThumbDV and WinDV Help
Hi Steve, Can you verify that your ThumbDV is being recognized by Windows as a USB device? Here is a video that N5ZNO from AmateurLogic.TV did some months ago about getting BlueDV installed & setup on
Hi Steve, Can you verify that your ThumbDV is being recognized by Windows as a USB device? Here is a video that N5ZNO from AmateurLogic.TV did some months ago about getting BlueDV installed & setup on
|
By
VE3MIC
· #923
·
|
|
OT: alsamixer - rPi B+ with Compass
Wondering if alsa mixer didn't get installed. Try> sudo apt-get install alsamixer
Wondering if alsa mixer didn't get installed. Try> sudo apt-get install alsamixer
|
By
VE3MIC
· #862
·
|
|
Converting the PIDV to USB
#pidv
John, please count me in(if shipping the DV3000 is economical from up here)... I had big ideas about salvaging that AMBE chip and reusing it. 73 de Mike
John, please count me in(if shipping the DV3000 is economical from up here)... I had big ideas about salvaging that AMBE chip and reusing it. 73 de Mike
|
By
VE3MIC
· #774
·
|
|
ThumbDV and BlueDV
Hi Robert, Yes you can -with just your ThumbDV, but you need the AMBE version of BlueDV running. Have a look at this> ambepage . 73 de Mike ambepage What is AMBE3000™. Digital Voice System’s AMBE-3000
Hi Robert, Yes you can -with just your ThumbDV, but you need the AMBE version of BlueDV running. Have a look at this> ambepage . 73 de Mike ambepage What is AMBE3000™. Digital Voice System’s AMBE-3000
|
By
VE3MIC
· #647
·
|
|
High Loss% with ThumbDV on DMR
Sounds a lot like streaming issues when connected to the Internet over a marginal wireless access point or low bandwidth connection. If you're using public WiFi when experiencing this, there's not muc
Sounds a lot like streaming issues when connected to the Internet over a marginal wireless access point or low bandwidth connection. If you're using public WiFi when experiencing this, there's not muc
|
By
VE3MIC
· #462
·
|