yep. i figured that much out, thanks! for me the main issue is to start by default using ttyUSB0 thanks

Modified from the README.md file sudo systemctl disable ambeserver@ThumbDV sudo systemctl stop ambeserver@ThumbDV sudo systemctl enable ambeserver@ttyUSB0 sudo systemctl start ambeserver@ttyUSB0 sudo

ah so i *am* on the right path it seems, i did see the -s flag, got side tracked, forgot about it. thanks for that! ok last (maybe dumb) question - assuming i want to continue starting with the ambese

OK -- there is more than one software that works with AMBE-3000 devices like the ThumbDV™ Look at https://github.com/nwdigitalradio/ambeserver-install/blob/master/etc/opendv/ambeserver-ttyUSB0.conf --

hi john, i'm sorry, maybe i don't understand your question? what software? so I had downloaded the source from https://github.com/nwdigitalradio/ambeserver-install - it looks like you're the managing

Which software?

HI! Apologies if this has been asked, before, i'm new to this, new to pi, and new to the this group! I actually have the DVSI version of the AMBE dongle, and was pointed to this group aftere find thin

The dvstick30 is not a product of NW Digital Radio, so recommend you contact the manufacturer for support.

Can I setup an ambe server using the dv mega or do I need the nwdigial thumbdv? Thank you kb7ppm

I have a problem with my ambe after more 2 years working with bluedv after hearing me choppy in dmr, however in c4fm and dstar perfect, then I reconnected it to the usb and it does not recognize it I

Thank you for the help!! I have it working. 73 Robert (Bob) Raymond Chief Warrant Officer, US Army, Retired Agent Orange Coordinator Vietnam Veterans of America, Chapter 879 Spokane, Washington

Robert, You have to install the FTDI drivers first. You can get them from: https://ftdichip.com/drivers. Willem, PE1NSU Op 7-3-2021 om 7:05 schreef Robert Raymond:

The ThumbDV™ uses FTDI chips. On Linux and MacOS typically no driver install is required. On Windows, the driver should be installed by the OS, but if it can't be located, then use this information -

Just tried to install my Thumbdv (DV3000U) on a new computer and it won't find the drivers. Can anyone point me to where I can download them? Thanks 73 W7RJR

I should also note that all ThumbDVs use the same FTDI chip. The baud rate change was simply a strapping option on the AMBE3000 chip 73, Bryan K7UDR NW Digital Radio

Here’s FTDI’s explanation https://www.ftdichip.com/Support/Documents/TechnicalNotes/TN_152_USB_3.0_Compatibility_Issues_Explained.pdf 73, Bryan K7UDR NW Digital Radio

You might need to change baud rate and retest

Dave, John, Lee, THANK YOU ALL - Its now working with BlueDV - after numerous days of strugle - Thank you all - if you ever make it to San Diego - visit the USS Midway Museum Ham Shack - NI6IW to chec

Dave, Thanks - I did that with a Run As "ADMINISTRATOR" prompt - which finally gave results below for the first time - which seems to present an error - see below: Thanks Bruce 7 3 W6JJ

You should run the test program from a dos and prompt. There is input it requires and it outputs the results of the test to the console.