Topics

Pb Installing ThumDV AMBE server on RPI3b+


Pierre-Paul Raoult
 

Hi all,

I want to install a AMBE server on a RPI3b+. I followed all wikis on this topic... Unfortunately when I run service i got this error.... I don't know how to solve it... Please Help.

Thanks best regards, 73 from F1JMN

pi@AMBE-server:~ $ sudo systemctl status ambeserver@...

ambeserver@... - DV3000 Daemon

   Loaded: loaded (/lib/systemd/system/ambeserver@.service; enabled; vendor preset: enabled)

   Active: failed (Result: exit-code) since Tue 2018-12-11 12:07:44 CET; 440ms ago

  Process: 420 ExecStart=/usr/sbin/AMBEserver -p ${UDP_PORT} -i /dev/ttyS0 $AMBESERVER_FLAGS (code=exited, status=1/FAILURE)

  Process: 416 ExecStartPre=/bin/chmod 0660 /dev/ttyS0 (code=exited, status=0/SUCCESS)

  Process: 406 ExecStartPre=/bin/chgrp dialout /dev/ttyS0 (code=exited, status=0/SUCCESS)

 Main PID: 420 (code=exited, status=1/FAILURE)

 

déc. 11 12:07:01 AMBE-server systemd[1]: Starting DV3000 Daemon...

déc. 11 12:07:01 AMBE-server systemd[1]: Started DV3000 Daemon.

déc. 11 12:07:01 AMBE-server AMBEserver[420]: AMBEserver: Starting...

déc. 11 12:07:01 AMBE-server AMBEserver[420]: AMBEserver: Opened serial port /dev/ttyS0 at 460800 bps.

déc. 11 12:07:44 AMBE-server systemd[1]: ambeserver@...: Main process exited, code=exited, status=1/FAILURE

déc. 11 12:07:44 AMBE-server systemd[1]: ambeserver@...: Unit entered failed state.

déc. 11 12:07:44 AMBE-server systemd[1]: ambeserver@...: Triggering OnFailure= dependencies.

déc. 11 12:07:44 AMBE-server systemd[1]: ambeserver@...: Failed with result 'exit-code'.


Richard Aubin
 

Try to feed the ThumbDv trough a USB hub that has en external power supply .. I have seen some problem with the Rpi not able to  feed the ThumbDv properly.

Richard Ve2DJE



Le mar. 11 déc. 2018 10:33 a.m., Pierre-Paul Raoult via Groups.Io <f1jmn=me.com@groups.io> a écrit :
Hi all,

I want to install a AMBE server on a RPI3b+. I followed all wikis on this topic... Unfortunately when I run service i got this error.... I don't know how to solve it... Please Help.

Thanks best regards, 73 from F1JMN

pi@AMBE-server:~ $ sudo systemctl status ambeserver@...

ambeserver@... - DV3000 Daemon

   Loaded: loaded (/lib/systemd/system/ambeserver@.service; enabled; vendor preset: enabled)

   Active: failed (Result: exit-code) since Tue 2018-12-11 12:07:44 CET; 440ms ago

  Process: 420 ExecStart=/usr/sbin/AMBEserver -p ${UDP_PORT} -i /dev/ttyS0 $AMBESERVER_FLAGS (code=exited, status=1/FAILURE)

  Process: 416 ExecStartPre=/bin/chmod 0660 /dev/ttyS0 (code=exited, status=0/SUCCESS)

  Process: 406 ExecStartPre=/bin/chgrp dialout /dev/ttyS0 (code=exited, status=0/SUCCESS)

 Main PID: 420 (code=exited, status=1/FAILURE)

 

déc. 11 12:07:01 AMBE-server systemd[1]: Starting DV3000 Daemon...

déc. 11 12:07:01 AMBE-server systemd[1]: Started DV3000 Daemon.

déc. 11 12:07:01 AMBE-server AMBEserver[420]: AMBEserver: Starting...

déc. 11 12:07:01 AMBE-server AMBEserver[420]: AMBEserver: Opened serial port /dev/ttyS0 at 460800 bps.

déc. 11 12:07:44 AMBE-server systemd[1]: ambeserver@...: Main process exited, code=exited, status=1/FAILURE

déc. 11 12:07:44 AMBE-server systemd[1]: ambeserver@...: Unit entered failed state.

déc. 11 12:07:44 AMBE-server systemd[1]: ambeserver@...: Triggering OnFailure= dependencies.

déc. 11 12:07:44 AMBE-server systemd[1]: ambeserver@...: Failed with result 'exit-code'.


Ludovic Ludo
 


 

Often these issues boil down to the power supply for the Pi, make sure your supply is at or above the recommended 2.5A at 5.1 VDC as recommended for the Pi.
--


John D. Hays
Edmonds, WA
K7VE