error when saving setup #thumbdv #bluedv
|
Merle Watts
I have a thumbdv and BlueDV for windows.
About 2 yrs ago I was in Asia using DMR. and everything was working fine. I updated BlueDV on my laptop and I could no longer get the settings to save. I get an error that says "Object reference not set to an instance of an object". After returning to the US I started getting the same error on my desktop. Any ideas? It's been 2 yrs now and it still doesn't work on either the laptop or the desktop. Both have windows 10.
|
|
|
|
Upgrade to the latest version 9570 and select an YSF reflector in the setup. Then save.
Greets and 73, David PA7LIM
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io>
On Behalf Of Merle Watts via Groups.Io
Sent: Wednesday, 18 December 2019 23:58 To: ambe@nw-digital-radio.groups.io Subject: [ambe] error when saving setup #bluedv #thumbdv
I have a thumbdv and BlueDV for windows.
|
|
|
|
if.only@...
Hi, I too had this problem, on Windows 10 I got the PC to use a suitable mode which turned out to be Windows 8 for that particular prog. and it worked fine then.
Hope that helps. M3VWU
|
|
|
|
Ludovic Ludo
You have not the last version i suppose.
So update it. Best regards, Ludovic - F5PBG
|
|
|
|
David is the author and authority, please follow his direction on BlueDV.
On Mon, Dec 23, 2019 at 8:56 AM David PA7LIM <info@...> wrote:
--
John D. Hays Kingston, WA K7VE
|
|
|
|
Just a heads up for anyone upgrading to the latest version of BlueDv. Upon installing the upgrade BlueDV appeared to be working well. The only problem was I had no audio. I fought this for a couple of days before getting it resolved. Here is what finally worked….
Originally my system had the default audio driver which Win10 installed when I did the upgrade to Win10. That has always worked until this last install of BlueDV. After screwing around with a lot of things I finally went to the ASUS downloads section, ( maker of my motherboard ) and I downloaded the audio driver for my specific motherboard for Win10. Installing that fixed it!
Honestly I have my doubts the driver was the problem. I think the act of installing a new driver reset something in my system that was keeping it from working. I only post this in case someone else has the same issue maybe this will save them some time troubleshooting.
Regards, David N5BOC
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of David PA7LIM
Sent: Monday, December 23, 2019 10:56 AM To: ambe@nw-digital-radio.groups.io Subject: Re: [ambe] error when saving setup #bluedv #thumbdv
Upgrade to the latest version 9570 and select an YSF reflector in the setup. Then save.
Greets and 73, David PA7LIM
From: ambe@nw-digital-radio.groups.io <ambe@nw-digital-radio.groups.io> On Behalf Of Merle Watts via Groups.Io
I have a thumbdv and BlueDV for windows.
|
|
|