Date
1 - 11 of 11
ambeserver on a Raspberry Pi stops after 30 seconds #ambeserver
|
klammeraffe2@...
Hello,
I am quit new and has just start to work a little bit with a Raspberry Pi . I nstalled the image according the Wiki to run the ambeserver with an ThumbDV. So far so good till after approx. 30 sec the server failed - attached the sceenshot of the status-messages. Maybe someone can give me some hints, where to look for, that teh server is running "longer" than 35 seconds... regards Karl 
|
|
|
|
Point us to which directions/image you are using. Some are outdated or missing an element. On Tue, Jun 23, 2020 at 9:20 AM <klammeraffe2@...> wrote: Hello, --
John D. Hays Kingston, WA K7VE |
|
|
|
Hi, you get Problems to Start ambe server demon by open serial Port before. Check why ttyUSB0 cannot open, maybe open /etc/group with nano or Other editor add dailout with the User who starts ambe Server. Am 23.06.2020 18:07 schrieb klammeraffe2@...: Hello, |
|
|
|
klammeraffe2@...
John,
tnx for the reply. I followed the mentioned image from the WIKI - archive.compasslinux.org (image_2018-12-31-compass-lite.zip) on a RPi 2. Have't seen an other image....and I am not sure, if I can use the original raspian image? Karl |
|
|
|
klammeraffe2@...
Stefsan,
as I read this in another part of this forum - so I checked it already . Have actually just the user "pi" and this one is so in the file "dialout:x:20:pi,opendv" Karl |
|
|
|
klammeraffe2@...
Hello around,
think san close this - just disconnetct the ThumbDV and reconnect them again to the RPi and no it works - test it just with a connect from the Blue DV app on my android and it works Don't know why this is the solution , but ..... Thanks to everybody Karl |
|
|
|
This is usually a user/group/permission problem. The Compass Linux images are older and mostly deprecated. They can work, but I generally start with a newer Raspberry Pi OS (formerly Raspbian - Buster) version. I then follow https://nw-digital-radio.groups.io/g/ambe/wiki/1520#Quick-Build-on-Linux the source, support, and test programs can also be found at https://nw-digital-radio.groups.io/g/ambe/files AMBEserver is really a pretty simple daemon program. As long as the environment is right it should work. On Tue, Jun 23, 2020 at 9:43 AM <klammeraffe2@...> wrote: Stefsan, --
John D. Hays Kingston, WA K7VE |
|
|
|
Sometimes the ThumbDV™ will get some bad data on the USB (another program hitting it or such) to start and the reinsert will fix the problem. On Tue, Jun 23, 2020 at 9:48 AM <klammeraffe2@...> wrote: Hello around, --
John D. Hays Kingston, WA K7VE |
|
|
|
Nomis Bayan Jr.
Hello Karl, try to replace the port from "12460" to "2460". On 6/23/2020 9:07 AM,
klammeraffe2@... wrote:
Hello, |
|
|
|
klammeraffe2@...
Hi Nomis,
tnx, I had done this the port change just for the test as I thought it could be the reason - but it wasn't the problem is solved, just be take off and back of the ThumbDV from the USB-port of the RPi |
|
|
|
Nomis Bayan Jr.
Hi Karl, I have Compass, DVswitch Mobile and AMBEServer working at the
same time. It has been couple of months that I have no problem. I
can share my notes to you, just email me at nolyn78@.... On 6/23/2020 10:07 PM,
klammeraffe2@... wrote:
Hi Nomis, |
|
|