ambeserver on a Raspberry Pi stops after 30 seconds #ambeserver


klammeraffe2@...
 

Hello,

I am quit new and has just start to work a little bit with a Raspberry Pi . I nstalled the image according the Wiki to run the ambeserver with an ThumbDV.
So far so good till after approx. 30 sec the server failed - attached the sceenshot of the status-messages.

Maybe someone can give me some hints, where to look for, that teh server is running "longer" than 35 seconds...

regards
Karl


 

Point us to which directions/image you are using.  Some are outdated or missing an element.

On Tue, Jun 23, 2020 at 9:20 AM <klammeraffe2@...> wrote:
Hello,

I am quit new and has just start to work a little bit with a Raspberry Pi . I nstalled the image according the Wiki to run the ambeserver with an ThumbDV.
So far so good till after approx. 30 sec the server failed - attached the sceenshot of the status-messages.

Maybe someone can give me some hints, where to look for, that teh server is running "longer" than 35 seconds...

regards
Karl



--
John D. Hays
Kingston, WA
K7VE

 


Stefsan
 

Hi, you get Problems to Start ambe server demon by open serial Port before.
Check why ttyUSB0 cannot open, maybe open /etc/group with nano or Other editor add dailout with the User who starts ambe Server.


Am 23.06.2020 18:07 schrieb klammeraffe2@...:

Hello,

I am quit new and has just start to work a little bit with a Raspberry Pi . I nstalled the image according the Wiki to run the ambeserver with an ThumbDV.
So far so good till after approx. 30 sec the server failed - attached the sceenshot of the status-messages.

Maybe someone can give me some hints, where to look for, that teh server is running "longer" than 35 seconds...

regards
Karl


klammeraffe2@...
 

John,

tnx for the reply. I followed the mentioned image from the WIKI - archive.compasslinux.org  (image_2018-12-31-compass-lite.zip) on a RPi 2.

Have't seen an other image....and I am not sure, if I can use the original raspian image?

Karl


klammeraffe2@...
 

Stefsan,

as I read this in another part of this forum - so I checked it already . Have actually just the user "pi"  and this one is so in the file "dialout:x:20:pi,opendv"


Karl


klammeraffe2@...
 

Hello around,

think san close this  - just disconnetct the ThumbDV and reconnect them again to the RPi and no it works  - test it just with a connect  from the Blue DV app on my android and it works

Don't know why this is the solution , but .....

Thanks to everybody

Karl


 

This is usually a user/group/permission problem.

The Compass Linux images are older and mostly deprecated.  They can work, but I generally start with a newer Raspberry Pi OS (formerly Raspbian - Buster) version.  I then follow  https://nw-digital-radio.groups.io/g/ambe/wiki/1520#Quick-Build-on-Linux the source, support, and test programs can also be found at  https://nw-digital-radio.groups.io/g/ambe/files  
 

AMBEserver is really a pretty simple daemon program.  As long as the environment is right it should work.



On Tue, Jun 23, 2020 at 9:43 AM <klammeraffe2@...> wrote:
Stefsan,

as I read this in another part of this forum - so I checked it already . Have actually just the user "pi"  and this one is so in the file "dialout:x:20:pi,opendv"


Karl



--
John D. Hays
Kingston, WA
K7VE

 


 

Sometimes the ThumbDV™ will get some bad data on the USB (another program hitting it or such) to start and the reinsert will fix the problem.

On Tue, Jun 23, 2020 at 9:48 AM <klammeraffe2@...> wrote:
Hello around,

think san close this  - just disconnetct the ThumbDV and reconnect them again to the RPi and no it works  - test it just with a connect  from the Blue DV app on my android and it works

Don't know why this is the solution , but .....

Thanks to everybody

Karl



--
John D. Hays
Kingston, WA
K7VE

 


Nomis Bayan Jr.
 

Hello Karl,

try to replace the port from "12460"  to "2460".

On 6/23/2020 9:07 AM, klammeraffe2@... wrote:
Hello,

I am quit new and has just start to work a little bit with a Raspberry Pi . I nstalled the image according the Wiki to run the ambeserver with an ThumbDV.
So far so good till after approx. 30 sec the server failed - attached the sceenshot of the status-messages.

Maybe someone can give me some hints, where to look for, that teh server is running "longer" than 35 seconds...

regards
Karl


klammeraffe2@...
 

Hi Nomis,

tnx, I had done this the port change just for the test as I thought it could be the reason - but it wasn't the problem is solved, just be take off and back of the ThumbDV from the USB-port of the RPi


Nomis Bayan Jr.
 

Hi Karl,

I have Compass, DVswitch Mobile and AMBEServer working at the same time. It has been couple of months that I have no problem. I can share my notes to you, just email me at nolyn78@....

On 6/23/2020 10:07 PM, klammeraffe2@... wrote:
Hi Nomis,

tnx, I had done this the port change just for the test as I thought it could be the reason - but it wasn't the problem is solved, just be take off and back of the ThumbDV from the USB-port of the RPi