Hallo, i try to change port on my AMBEServer running on Compass Linux under Rasp PI, so in the directory /etc/opendv i change the file ambeserver-ttyUSB0.conf The problem is that every time i reboot t

Hello, i use the DVStick 30 from auria.nl On BlueDV last version i have not Call and name but ID in the call case : It is ok on the BlueDV AMBE for my smartphone. Have you an idea to correct that ? Be

I am looking for a way to record DV files for playback as announcements on D-STAR gateway. Any suggestions on hardware/software to record DV files. Ed KA8JMW

I misspoke : The feature exists but you have to activate "start/stop beep". For my part, the "start/stop beep" do not interest me because in reception of a QSO, i do not like this fonctionnality So th

Thanks to everyone who develops around the key DVSTick 30 and especially to PA7LIM. . Good ideo to have a setting of kill timer. I sometimes speak after the time-out because I do not always realize th

Thanks to everyone who develops around the key DVSTick 30 and especially to PA7LIM. . Good ideo to have a setting of kill timer. I sometimes speak after the time-out because I do not always realize th

I am connecting BlueDV Ambe version 1.0.48 to my Ambe Server (with DVstick 30) remotely over the internet. This works well and without any issues on my Huawei P10. I also have an Inrico T320 (Quad cor

These days I tried to run AMBE SERVER under Windows, Linux Rasbian and Linux Compass but the result was always the same, block after a few minutes of operation. I finally realized why my Ambe server c

Hallo, I installed AMBE servers with Raspberry and Compass Linux, so my problem is that it works well for a few hours but then stops and I have to restart the Raspberry. For your experience do you fin

I want to run BlueDV AMBE Server on Debian. I operate the reflector and the BlueDV AMBE Server with two raspberries pi. I want to operate these two with one Debian Server. Is this difficult for me? To

[Moderator: Questions about the DVMEGA product should addressed to it's manufacturer. This port is included as a courtesy with respect to AMBEserver -- The first question is whether this device baud r

It was reported to me that someone on the International D-STAR net said that the ThumbDV was going out of production. THIS IS NOT TRUE. The ThumbDV is on sale for $99.95 on existing stock. NW Digital

I’m using Buster on MacBook Pro and ThumbDV. It works on REF reflectors, but not XLX reflectors. Recent update allowed linking to XLX reflector and transmission confirmed on Dashboard. Could not hear

Ok, I'm going to have to echo some of the plaintive requests by others who have asked this same thing before me. I have a RasPi 3B+ that I want to install AMBEserver on. I would rather NOT have to bui

Anna, If you happen to see this, I would appreciate some advice. Thanks. Dick Herrick, BEE, PE rjherrickpe@... (Office) 704-509-2882 (Cell) 704-995-1522

hallo, i try to install amberser on my Rapsberry but when i write in a terminal: sudo apt-get install ambeserver i receive this message: pi@raspberrypi:~ $ sudo apt-get install AMBEServer Reading pack

Hallo, i try to install ambeserver and i digit: sudo apt-get install ambeserver But i have this message: pi@raspberrypi:~ $ sudo apt-get install ambeserver Reading package lists... Done Building depen

GM, folks. Running Buster on an iMac late 2015. Works fine. Friends wanted me to connect to an experimental reflector XLX003-R, but Buster could not link to it. The others were all on Windows machines

How can I install ambe server on raspberry pi 3 B+.

I was led to believe by a fellow ham that the ThumbDV and BlueDv is all I would need to connect it to my wifi. Nothing was mentioned about any other hardware (such as megadv). All the instructions I f