I am working on installing a thumbDV on a current release Ubuntu machine. I have followed the instructions John provided "Quick Build on Linux" but I have run into problem(s). The download and compila

I have installed AMBEd on my Raspberry Pi3 but whenever i ./run i get "Codec interfaces initialized successfully : 0 channels available" so what am i doing wrong ? 73 John Mi0AAZ.

Hi - Has anyone tried to use a ThumbDV with its AMBE firmware to feed digital data to a radio's TNC input or to modulate a radio's audio? I have an IC-7000, which has a 9600 data input and, like many,

Good day again. Followed David, PA7LIM, instructions for changing Talkgroups. I am stuck in Talkgroup 91. I tried to change to a number of other Talkgroup (93, 310). I inserted 93 in the box, and it c

I want to be able to send messages to users. 73, Alex, UW0WU

The IP address for our ambeserver was changed, now we can not connect to our dstar reflector. I can connect to other dstar reflector except our dstar reflector. The DMR TG is working fine. Please advi

I have a Portable AMBEserver made by the Japanse XRF reflector club. I have it setup and is running without any issues. With my limited knowledge on Linux, I can access AMBEserver via SSH. I can list

Greetings All, I installed BlueDV for Linux (under parallels for mac). mono is installed a-ok, linux appears to "see" the thumbdv. I'm not sure why BlueDV won't allow me to tick the thumb-dv checkbox?

I have a ThumbDV dongle. After a lot of working with this I finally hot it all set up. I connected to a local server and my TX audio is working fine, but I can not hear anything when people talk. It s

Sorry for the redundant posting. I thought I would supply a bit more information than previous posts. The screenshots are of my Bluedv and Device Manager settings. I hope this will spark some suggesti

I have D-STAR and DMR working on BlueDV. However I have a question. When I transmit on DMR, I do not see any of my data displayed (Call, Name, etc). The only thing displayed is my DMR number. Most sta

I know I have seen an article on how to tell if the Thumbdv is an old version or new by visual inspection. Google cant find it and I see no mention on this message board. Can someon point me to it or

Using WinDV I am able to access a list of actual Dstar repeaters, not just Reflectors. I just installed BlueDV, very nice. Can BlueDV also access a list repeaters ? I don't see anything obvious... And

I have a fresh install of buster light and I'm working on installing ambed. Any idea why I'm getting this? g++ -c -std=c++11 -pthread cvocodecinterface.cpp -o cvocodecinterface.o g++ -std=c++11 -pthre

It was working well on Windows 7 but won’t work on Windows 10, Does it need a new driver for Win10?? Nga mihi Peter Moore 13 Ruataniwha Street Waipawa 4210 068577340

I followed the instruction fro installing the ambeserver on a Raspebbery Pi and ThumbDV (Installing AMBEserver on a Raspberry Pi and ThumbDV™). The sever is working fine. But When I added another thum

I have used two thunbvs in my the ambed server for xlxd for about six months now. Everything has worked wonderfully. I rebooted the system running everything this morning, I when I went to start the a

AMBE dongle is not seen by BlueDV. All I see is a flashing green light for about a second on the dongle then nothing happens, BlueDV screen shows no recognized hardware. HELP Using Windows 10 and two

I have a thumbdv and BlueDV for windows. About 2 yrs ago I was in Asia using DMR. and everything was working fine. I updated BlueDV on my laptop and I could no longer get the settings to save. I get a

Is there anyway to eliminate this message at the start up of the program? “Cannot make connection to Brandmeister network “. I get it about 50% of the time or more when I start up. All I have to do is