I suggest you start here: http://www.pa7lim.nl/bluedv/ -=-=-=-=-=-=-=-=- 73, Gwen, NG3P

Hello I would like to do an AMBE server which transcode DSTAR <-> DMR My AMBE Server work correctly with one ThumbDV3000. I receive my second ThumbDV3000. I stop/start the AMBE Server with two file in

Does anyone know what has happened to the WinDV site? I'd like to give it a try. The dutch-star.eu/software site times out.

Hi, I'm a brand new user of the ThumbDV, but not new to Dongles in general. While I can get my DV3K dongle to work with BlueDV, I cannot say the same about my ThumbDV which just came in the mail today

It seems that I cannot locate IRCDDBGateway. It is not included in the Amateur Radio package list either for the Raspberry pi or for Ubuntu. Neither do the terminal-based instructions in the document

New to this site so this may be a dumb question but here it goes. I have a NWDR AMBE thumbdv. Connected to my PC (Win10) and Blue DV installed. I ran the thumbdv test and it is communicating on a com

Hello, This email message is a notification to let you know that the following files have been uploaded to the Files area of the ambe@nw-digital-radio.groups.io group. /AMBEserver.c Uploaded By: John

I am working on installing a thumbDV on a current release Ubuntu machine. I have followed the instructions John provided "Quick Build on Linux" but I have run into problem(s). The download and compila

I have installed AMBEd on my Raspberry Pi3 but whenever i ./run i get "Codec interfaces initialized successfully : 0 channels available" so what am i doing wrong ? 73 John Mi0AAZ.

Hi - Has anyone tried to use a ThumbDV with its AMBE firmware to feed digital data to a radio's TNC input or to modulate a radio's audio? I have an IC-7000, which has a 9600 data input and, like many,

Good day again. Followed David, PA7LIM, instructions for changing Talkgroups. I am stuck in Talkgroup 91. I tried to change to a number of other Talkgroup (93, 310). I inserted 93 in the box, and it c

I want to be able to send messages to users. 73, Alex, UW0WU

The IP address for our ambeserver was changed, now we can not connect to our dstar reflector. I can connect to other dstar reflector except our dstar reflector. The DMR TG is working fine. Please advi

I have a Portable AMBEserver made by the Japanse XRF reflector club. I have it setup and is running without any issues. With my limited knowledge on Linux, I can access AMBEserver via SSH. I can list

Greetings All, I installed BlueDV for Linux (under parallels for mac). mono is installed a-ok, linux appears to "see" the thumbdv. I'm not sure why BlueDV won't allow me to tick the thumb-dv checkbox?

I have a ThumbDV dongle. After a lot of working with this I finally hot it all set up. I connected to a local server and my TX audio is working fine, but I can not hear anything when people talk. It s

Sorry for the redundant posting. I thought I would supply a bit more information than previous posts. The screenshots are of my Bluedv and Device Manager settings. I hope this will spark some suggesti

I have D-STAR and DMR working on BlueDV. However I have a question. When I transmit on DMR, I do not see any of my data displayed (Call, Name, etc). The only thing displayed is my DMR number. Most sta

I know I have seen an article on how to tell if the Thumbdv is an old version or new by visual inspection. Google cant find it and I see no mention on this message board. Can someon point me to it or

Using WinDV I am able to access a list of actual Dstar repeaters, not just Reflectors. I just installed BlueDV, very nice. Can BlueDV also access a list repeaters ? I don't see anything obvious... And