Hi All, Using a compass image and having a two thumb dv stick connected to one raspberrypi does it work as two ambe server? changing the port of each ambe configuration? let say ttyUSB0 is port 2460 a

Hi, I’m thinking of purchasing an Inrico T320 network radio. Does BlueDV work with it? Will it display in portrait mode? Will I be able to use the PTT on the side to transmit? Any other HT like networ

Hello, I am quit new and has just start to work a little bit with a Raspberry Pi . I nstalled the image according the Wiki to run the ambeserver with an ThumbDV. So far so good till after approx. 30 s

Hi Guys, just wondering IF any members have used the ThumbDV or DVstick 30 with a Microsoft Surface Go Tablet using Blue DV software? Rgds Mike VK4MY

Has anyone been able to get the ThumbDV to work on the Raspberry Pi4?........Ed

I have a new thumbdv that seems to be working well with Bluedv. On DSTAR, no issues. On DMR, however, when I view my transmission on a pi-star dashboard, I show between 10% and 30% loss. What adjustme

I wasn't able to connect the Thumbdv to the software. Even though it was showing up in device manager as a USB serial port. Device manager told me in events that the device wasn't through installing.

Can not get bluedv to work on dmr have put the uk server with pass1rd and passw0rd it just says not logged in jave it set at the right broadrate any ideas.

Peanut for Windows Version 2.2.7 When I select the ON control I get the following error: ERROR:Incorrect Code! www.pa7lim/nl/peanut. On the setup page I entered my callsign and the DRM id was returned

I'm running into trouble with getting the service started on a Pi3 with Compass and a DVstick 30. It sounds like the DVstick is compatible but can someone please confirm. Thanks!

I am trying to get ThumbDV & BlueDV to work, but it does not seem to "transmit", I can hear conversations, but when I push the space bar is seems to TX but the TX bar does not turn red. Also I can see

I am running bluedv ambe mobile on my cell phone using thumbdv and ambeserver from my home network. I have an iTalkie Bluetooth Speaker / Mic. The audio works fine but not the PTT function. Does anyon

Good day, all. I want to thank David for providing full function Fusion in BlueDV with ThumbDV. I am new to Fusion and need some basic operating hints for operating Fusion with BlueDV. The only links

Posted on May 10, 2020 by k7udr in D-STAR, DMR, Fusion, ThumbDV When we started the sale back in March, it was until the Stay at Home Order was lifted or we ran out of inventory. Due to high sales, we

Okay, I found this behavior only happens on a PC where BlueDV has never been installed. ( I assume there is no default set in BlueDVconfig.ini is why ) Thanks, David

I have been running BlueDV for Windows with a ThumbDV for many months with no problems. For several days, I have not been able to log into DMR . When I first start up BlueDV, I get a message that I ca

I don’t know if this is where we should post issues found. If you are like me, you’d almost rather not hear about them. 😊 But what I’ve found is, you can’t select the Audio Input or Output device unti

We do not write or support the SW, which is offered for free from dedicated Hams and supported by the community via our forums. The ThumbDV has a 30 day money back guarantee. For a refund, send it to:

Hi, You may want to check out this starting page for the ThumbDV: http://nwdigitalradio.com/thumbdv-and-dv3000-resource-page/ I am using the ThumbDV with BlueDV to communicate over D-STAR and DMR. Hop

The dutch-star.eu services are back online for WinDV users/ -- ------------------------------ John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223 <http://k7ve.org/blog> <http://twitter.com/#!/j