Noobie Question Serial Port & Sound Card


These must be really simple things to resolve cause I can't see where anyone else has the issues I am having.

I have the DV3000 card that I am trying to run on a Rpi2.

The first thing I had to change to get my RPi to boot-up after making intial changes(speeding up clock and disabling serial port) to add DV3000 to the Rpi2 was this line:
dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait

I had to change to be:

dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait

Does that sound right? But I was able to boot-up after making this change.

I did get the results for the AMBEserver test when running the sudo python test.

Installed IRCDDBGateway and setup using examples from the dv3000.pdf.

When I run the sudo dummyrepeater command, I can not select the USB sound card. The card shows up as a selection in alsamixer, though. And then if I select DVSerial for the Dongle, I have only a slection of none or /dev/ttyAMA0. If I select the AMA0, when I launch dummyrepeater the next time it tells me it can't find the AMBE Dongle on the specified port. How do I know which port this should be looking for?

I am still fairly new at the raspberry pi and linux, so thanks for all the help and patience you can give me.

73s de KJ5FA,



Join to automatically receive all group messages.