Re: Pi - Can't Find AMBE Dongle On The Port Specified


guy81@...
 

Do you have the windows firewall service disabled?  If not go to services, stop the windows firewall service, disable it then reboot.  I ran into the same thing when setting up mine.

Sent from XFINITY Connect Mobile App


------ Original Message ------

From: dan@... [UniversalDigitalRadio]
To: UniversalDigitalRadio@...
Sent: June 18, 2015 at 6:35 PM
Subject: [UniversalDigitalRadio] Re: Pi - Can't Find AMBE Dongle On The Port Specified
 

The Pi is at 192.168.100.229, and Dummy Repeater's Dongle tab is set to Type=DV3000 Network, Address=192.168.100.229, and Port=2460.  


I don't recall seeing configuration info for AMBEserverGPIO , but it is running and appears to be listening on UDP/2460

Not sure if I mentioned this earlier, but I installed Dummy Repeater and ircDDBGateway on the Pi, and was able to make it work until the sound card crapped out.   In that case I used the same port and 127.0.0.1 in Dummy Repeater.

Following is some testing of the port and the IP on the Pi.

root@raspberrypi:/etc/init.d# service AMBEserverGPIO stop
Terminated

root@raspberrypi:/etc/init.d# netstat -ae |grep 2460

root@raspberrypi:/etc/init.d# service AMBEserverGPIO start
Starting AMBEserverGPIO
Reset DV3000
root@raspberrypi:/etc/init.d# Wrote Reset 5 chars
AMBEserver: unknown byte from the DV3000, 0xFE

root@raspberrypi:/etc/init.d# netstat -ae |grep 2460
udp        0      0 *:2460                  *:*                                 root       84477

root@raspberrypi:/etc/init.d# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr b8:27:eb:99:98:8a
          inet addr:192.168.100.229  Bcast:192.168.100.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:304610 errors:0 dropped:408 overruns:0 frame:0
          TX packets:122091 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:57155839 (54.5 MiB)  TX bytes:10437004 (9.9 MiB)


Join main@nw-digital-radio.groups.io to automatically receive all group messages.