Re: Pi - Can't Find AMBE Dongle On The Port Specified
"Dan Ozment" <dan@...>
toggle quoted messageShow quoted text
That’s correct. At one point I had Dummy Repeater and ircDDBGateway installed on the Pi, and I was able to make it talk to the card. I was never able to get to it from the remote PC. I have rebuilt and reinstalled the Pi since then.
I just tried again with ttyAM0 and got the same result.
John, if I give you SSH access would you consider looking at the Pi? I just set up a port forwarding rule to get to it from outside my firewall. I forwarded both TCP/22 (on a non-standard port) and UDP/2460. I could send you details in a private email if you would do that for me.
From: UniversalDigitalRadio@... [mailto:UniversalDigitalRadio@...]
Sent: Friday, June 19, 2015 12:39 PM
Subject: Re: [UniversalDigitalRadio] Re: Pi - Can't Find AMBE Dongle On The Port Specified
It doesn't appear you DV3000 is talking (we are talking about the GPIO plug in card on a Raspberry Pi, correct?)
From our site --
Test your DV3000 for communication with Raspberry Pi
sudo python AMBEtest2.py
The results should include:
Your results do not indicate this.
If you do a
You should see a /dev/ttyAMA0 -- this is the interface for the DV3000 (A ThumbDV would show up as a /dev/ttyUSBx where x is a number). In which case you would use
AMBEserverGPIO -x -i /dev/ttyAMA0