Re: blueDV; Windows 7 & ThumbDV 3000


Douglas F. Enoch
 

Yes I got that.  I didn’t make the terminology connection.  Thanks again.  73,  Doug

 

From: main@nw-digital-radio.groups.io [mailto:main@nw-digital-radio.groups.io] On Behalf Of Eric Osterberg
Sent: Wednesday, May 02, 2018 3:20 PM
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] blueDV; Windows 7 & ThumbDV 3000

 

Kerchunk the talk-group you want to use... That will cause a link.

Kerchunk on 4000 to disconnect.

 

On Wed, May 2, 2018 at 11:31 AM, Douglas F. Enoch <doug.enoch@...> wrote:

Thank you very much the.   4000 issue was the problem.  But, I am not sure about what “issuing a link command” is??   Doug…KD8YVD

 

From: main@nw-digital-radio.groups.io [mailto:main@nw-digital-radio.groups.io] On Behalf Of n9ko@...
Sent: Wednesday, May 02, 2018 7:26 AM
To: main@nw-digital-radio.groups.io
Subject: Re: [nw-digital-radio] blueDV; Windows 7 & ThumbDV 3000

 

You must issue a 4000 Group call  before you go to a second TG. Try that.  If that does not take care of the "negative lock" then I would uninstall blueDV and reinstall it. Every time you start blueDV you will need to issue a link command. 

 

Join main@nw-digital-radio.groups.io to automatically receive all group messages.