Re: XC-3006 First Look
Mike - KB8ZGL <wolthuis@...>
So, that’s good call John, if I push my power supply all the way in, doesn’t make contact it seems…. I’ll need to find a different plug.
From: <email@example.com> on behalf of "wolthuis@..." <wolthuis@...>
Ok, I will double check…
No FTDI showing in dmesg. Note, this was working with the two dongles, I did recompile ambed to make sure it was the latest. It is acting like the device is not there.
I’ll try connecting to my laptop. Maybe wrong power plug, maybe smaller yet than what I used.
From: <firstname.lastname@example.org> on behalf of John Hays <john@...>
No lights. Make sure the center pin is in contact.
On Tue, Jun 12, 2018, 07:29 Mike - KB8ZGL <wolthuis@...> wrote: