Re: UDRC-II to Alinco DR-135TMKIII

Keith Williamson

Hi Brian,

I run an APRS digipeater (KF7DRV-3) 24/7 using the UDRC and DR-135. 

Here is the diagram of the cable I built for it. Just as Kenny suggested, I too started with a keyboard extension cable so that I didn't have to muck with the mini-DIN6. 



On Mon, Jun 25, 2018 at 11:56 AM, Kenny Richards <kenny@...> wrote:

This is a fairly easy cable to make. Find a keyboard extension cable with all the wires connected on the mini-6din, cut off one side and solder to the DB9 connector for the DR-135. I don't like trying to make the mini-din side, but soldering to the DB9 isn't to difficult.

Kenny, KU7M

Join to automatically receive all group messages.