Dan Porter (AI2M)

Hi Anna,

Thanks for the info. I’m definitely interested in following your progress.

Dan - AI2M

On Dec 7, 2018, at 1:01 AM, Annaliese McDermond <nh6z@...> wrote:

Dan --

Because I’m trying to get my repeater up and running again, and would like to use MMDVM-UDRC to do so, I’ve been doing some work on getting MMDVM-UDRC to work.  My code is in the nwdigitalradio github account at:

You’re welcome to play with it with the understanding that it’s development code, may not work at all.  I’m getting close to having things possibly working acceptably.

An issue you’ll have to deal with is that mmdvm-udrc expects a 24000 sample rate. The UDRC hardware doesn’t support this and if you try to use hw:CARD=udrc,DEV=0 it will fail complaining on not being able to send sample rate.  You might try using plughw:CARD=udrc,DEV=0 instead.  I’m using a custom asound.conf to support it.

More as I get things worked out.

Annaliese McDermond (NH6Z)

On Dec 6, 2018, at 4:51 AM, Dan Porter (AI2M) <groups@...> wrote:

Hi Rich,

Did you eventually manage to get it working? 
I was thinking of trying again with my UDRC.

73, Dan - AI2M

On Jul 6, 2018, at 3:05 PM, Rich KR4PI <rich.schnieders@...> wrote:

Thanks John, that helped but there were still a few errors along the way:

g++ -g -O3 -Wall -std=c++0x -pthread -c -o Biquad.o Biquad.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDMR.o CalDMR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarRX.o CalDStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalDStarTX.o CalDStarTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalNXDN.o CalNXDN.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CalP25.o CalP25.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CWIdTX.o CWIdTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMORX.o DMRDMORX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRDMOTX.o DMRDMOTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRSlotType.o DMRSlotType.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarRX.o DStarRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DStarTX.o DStarTX.cpp
DStarTX.cpp: In member function ‘void CDStarTX::txHeader(const uint8_t*, uint8_t*) const’:
DStarTX.cpp:382:7: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
      if (d & 0x08U)
DStarTX.cpp:384:9: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIR.o FIR.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o FIRInterpolator.o FIRInterpolator.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IO.o IO.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o IOUDRC.o IOUDRC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o MMDVM.o MMDVM.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o NXDNRX.o NXDNRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o NXDNTX.o NXDNTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o P25RX.o P25RX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o P25TX.o P25TX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o POCSAGTX.o POCSAGTX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SampleRB.o SampleRB.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SerialController.o SerialController.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SerialPort.o SerialPort.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SerialRB.o SerialRB.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o SoundCardReaderWriter.o SoundCardReaderWriter.cpp
SoundCardReaderWriter.cpp: In member function ‘virtual void CSoundCardWriter::entry()’:
SoundCardReaderWriter.cpp:479:85: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
le ((ret = ::snd_pcm_writei(m_handle, m_samples + offset, nSamples - offset)) != (nSamples - offset)) {
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Thread.o Thread.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Utils.o Utils.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o YSFRX.o YSFRX.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o YSFTX.o YSFTX.cpp
g++ Biquad.o CalDMR.o CalDStarRX.o CalDStarTX.o CalNXDN.o CalP25.o CWIdTX.o DMRDMORX.o DMRDMOTX.o DMRSlotType.o DStarRX.o DStarTX.o FIR.o FIRInterpolator.o IO.o IOUDRC.o MMDVM.o NXDNRX.o NXDNTX.o P25RX.o P25TX.o POCSAGTX.o SampleRB.o SerialController.o SerialPort.o SerialRB.o SoundCardReaderWriter.o Thread.o Utils.o YSFRX.o YSFTX.o -g -lpthread -lasound -lwiringPi -o MMDVM

it did complete the compile. When I attempt ./MMDVM is receive the following:

Link does not exist: /dev/pts/1 <> ttyMMDVM0
Error creating symlink from /dev/pts/1 to ttyMMDVM0
Unable to open serial port on vpty: ttyMMDVM0

I am assuming this indicates that it is not properly configured for the UDRC.  That is what I will be exploring next.

Thanks for the help
Rich, KR4PI

Join to automatically receive all group messages.