locked Re: DRAWS + FT-891 + WSJT-X/FT8

Steve McGrane <temporarilyoffline@...>

So that is really interesting.

On my working setup I made a few contacts on 40m last night.  This setup uses the radio in USB mode, not Data/Pkt.

When I switch DRAWS to Data/Pkt I am able to transmit and my signals are heard, but I no longer can decode any signals.

So I can have one, but not the other.

Still stumped, but maybe that is some progress in there?

Purple is from 40m on the working setup from last night, Yellow is from today on the DRAWS on 20m.  No receive on DRAWS


On Thu, Apr 11, 2019 at 11:14 PM <john.chabalko@...> wrote:
I'll have to dig around on this. To add some context to my comment - i've got a huge amount of interference around my home so just getting anything workable is a near miracle for me. I need to understand the signal processing options of the DRAWs better but just using FT8 and i was doing the same with WSPR, i'm getting what i consider to be successful transmission (but my bar is low, no doubt ;) )

For the OP, the other thing you could check is that you're in the right mode. I forgot to put my radio in "data" mode at one point and when it transmitted it opened the mic causing feedback. Took me a minute to figure out what was going on. I have SSB set to use the mic, and data set to use the rear connector (in the menus)

Join main@nw-digital-radio.groups.io to automatically receive all group messages.