Re: beacmin.sh vs btest.sh

Basil Gunn
 

David Lowry <huskyrunnr@...> writes:

After a git pull, in my hands, beacmin.sh works fine but btest.sh is sending invalid packets and complains when issued:
Thanks.
If I could only spell nmea properly. Checked in a fix.
https://github.com/nwdigitalradio/n7nix/commit/9854c38a39478e2f88956a9abe2c035196dedaa9

BAD
./btest.sh -p
*** Running as user: pi ***
Send a position beacon
./btest.sh: line 313: get_lat_lon_nemasentence: command not found
Invalid gps data
Sent: /usr/local/sbin/beacon -c N7NIX-11 -d 'APUDR1 via WIDE1-1' -l -s
udr0 !N/W-13 22:27:36 PDT, from mhams on port udr0 Seq: 5

GOOD
./btest.sh -p
*** Running as user: pi ***
Send a position beacon

/Basil
Sent: /usr/local/sbin/beacon -c N7NIX-11 -d 'APUDR1 via WIDE1-1' -l -s udr0 !4829.06N/12254.11W-13 22:28:37 PDT, from mhams on port udr0 Seq: 6


Raw packets from beacmin.sh



2019-04-13 22:52:03 EDT:*KE7RGP-15 ( https://aprs.fi/?c=raw&limit=&call=KE7RGP-15 )* >APUDR1, MISION ( http://aprs.fi/?c=raw&limit=&call=MISION ) ,WIDE1*,qAO, KF7FMI-10 ( http://aprs.fi/?c=raw&limit=&call=KF7FMI-10 ) :!4615.75N/11919.82Wp1319:52:01PDT,Seq:0C <0xa6>

2019-04-13 22:52:25 EDT:*KE7RGP-15 ( https://aprs.fi/?c=raw&limit=&call=KE7RGP-15 )* >APUDR1, MISION ( http://aprs.fi/?c=raw&limit=&call=MISION ) ,WIDE1*,qAO, KF7FMI-10 ( http://aprs.fi/?c=raw&limit=&call=KF7FMI-10 ) :!4615.75N/11919.82Wp1319:52:21PDT,Seq:1 <0xfc> <0x1c>





pi@ke7rgpi:~/n7nix $ git pull
Updating 207fc35..2a8f0ab
Fast-forward
bin/alsa-show.sh | 2 +-
bin/mgr-stop.sh | 39 ++++++++
bin/prog_refresh.sh | 65 +++++++++++++
config/bin_refresh.sh | 6 +-
config/core_install.sh | 2 +-
debug/beacmin.sh | 182 +++++++++++++++++++++++++++++++++++
debug/btest.sh | 132 ++++++++++++++++++++++---
docs/DRAWS_AUX_PORT.md | 52 ++++++++++
docs/IMAGE_README.md | 2 +-
docs/VERIFY_CONFIG.md | 12 +++
hfprogs/hf_verchk.sh | 12 ++-
hostap/fixed_ip.sh | 2 +-
hostap/hostap_config.sh | 102 ++++++++++++++++----
hostap/hostap_install.sh | 19 +++-
systemd/bin/ax25-status | 2 +-
xastir/{install.sh => xs_install.sh} | 46 +++++++--
16 files changed, 619 insertions(+), 58 deletions(-)
create mode 100755 bin/mgr-stop.sh
create mode 100755 bin/prog_refresh.sh
create mode 100755 debug/beacmin.sh
create mode 100644 docs/DRAWS_AUX_PORT.md
rename xastir/{install.sh => xs_install.sh} (60%)
pi@ke7rgpi:~/n7nix $ ls
ardop bin config direwolf dstarrepeater_1.20180703-4_armhf.deb gps iptables kernbuild plu systemd vnc
ax25 ChangeLog debug docs dstarrepeaterd_1.20180703-4_armhf.deb hfprogs ircddbgateway_1.20180703-1_armhf.deb mailserv README.md tracker xastir
bbs change_user deviation dstar email hostap ircddbgatewayd_1.20180703-1_armhf.deb manager rmsgw uronode yaac
pi@ke7rgpi:~/n7nix $ cd debug
pi@ke7rgpi:~/n7nix/debug $ sudo su
root@ke7rgpi:/home/pi/n7nix/debug# ./btest.sh -P udr0 -p
Send a position beacon
./btest.sh: line 313: get_lat_lon_nemasentence: command not found
Invalid gps data
Sent: /usr/local/sbin/beacon -c KE7RGP-11 -d 'APUDR1 via WIDE1-1' -l -s udr0 !N/W-13 19:28:50 PDT, from ke7rgpi on port udr0 Seq: 0
axconfig: duplicate callsign KE7RGP-10 in line 6 of axports file
chown: cannot access '/tmp/sequence.tmp': No such file or directory
root@ke7rgpi:/home/pi/n7nix/debug# exit
pi@ke7rgpi:~/n7nix/debug $ cd

root@ke7rgpi:/home/pi/n7nix/debug# ./beacmin.sh
Sent: /usr/local/sbin/beacon -c KE7RGP-15 -d 'APUDR1 via WIDE1-1' -l -s udr0 !4615.75N/11919.82Wp13 19:52:01 PDT, Seq: 0
axconfig: duplicate callsign KE7RGP-10 in line 6 of axports file
root@ke7rgpi:/home/pi/n7nix/debug# ./beacmin.sh
Sent: /usr/local/sbin/beacon -c KE7RGP-15 -d 'APUDR1 via WIDE1-1' -l -s udr0 !4615.75N/11919.82Wp13 19:52:21 PDT, Seq: 1
axconfig: duplicate callsign KE7RGP-10 in line 6 of axports file
root@ke7rgpi:/home/pi/n7nix/debug#

root@ke7rgpi:/home/pi/n7nix/debug# ./btest.sh -P udr0 -p
Send a position beacon
./btest.sh: line 313: get_lat_lon_nemasentence: command not found
Invalid gps data
Sent: /usr/local/sbin/beacon -c KE7RGP-11 -d 'APUDR1 via WIDE1-1' -l -s udr0 !N/W-13 19:55:31 PDT, from ke7rgpi on port udr0 Seq: 2
axconfig: duplicate callsign KE7RGP-10 in line 6 of axports file
root@ke7rgpi:/home/pi/n7nix/debug#

Join main@nw-digital-radio.groups.io to automatically receive all group messages.