Re: DRAWS Boot and GPS issues

Home Messages Hashtags Subgroups Wiki

mathison ott #2393 I know that the first 2 batches of 10k units didnt responded to low voltage. Is the board regulating 5v properly. check to see what thr voltage is on battery vs psu. Just my thoughts. https://www.dimensionengineering.com makes some good voltege regulators. 73 KJ6DZB toggle quoted messageShow quoted text On Wed, Apr 24, 2019, 6:23 PM John D Hays - K7VE <john@...> wrote: I ran some tests, with a weak battery and no battery. In each case, if the power is removed from the DRAWS™ HAT, then the GPS has to cold start and can take up to a few minutes to begin reporting time and position. If you do not remove power, and/or have a fresh battery, then it should come up quickly. On Tue, Apr 23, 2019 at 9:52 PM John D Hays - K7VE via Groups.Io <john=hays.org@groups.io> wrote: Chuck -- how long do you leave cgps or gpsmon running (in case of loss of satellite data and the GPS is cold starting)? On Tue, Apr 23, 2019 at 9:22 PM Chuck - VA7UL/VA7ULD & VE1CAM <va7ul@...> wrote: Thanks John! Private reply sent with three attachments. 73, Chuck -- John D. Hays Edmonds, WA K7VE -- John D. Hays Edmonds, WA K7VE
More All Messages By This Member

Join main@nw-digital-radio.groups.io to automatically receive all group messages.